Ventilation Systems Equipment For Air And Climate In Czech Republic
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Evaporative cooling presents a proven procedure to cool chicken, hog or green houses, especially in warm regions of the world. For this purpose, 2H HUMIPACKING fills are mounted into the walls of stables and green houses and are irrigated. An air flow generated by fans is lead through the fills and is at the same time humidified and cooled. The use of polypropylene together with the special ...
-
PremiumManufactured by Brentwood Industries, Inc.based in USA
Exhaust Air Cleaning in Stables: Dust and ammonia are the substances to be cleaned from the waste air. Prescribed are cleaning efficiencies from 70-90% depending on where the sheds/stables are located. To efficiently and economically comply with this task, filling materials are needed which can be used in both counter and cross-flow applications (e.g. tunnel ventilation) in local waste air ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuously monitors particulate flow for signs of filter damage or broken filter bags. Compact and cost effective. The Dusty C has been specially developed to monitor clean sides after filters with high reliability and without time delay for filter breaks. It can be used in metallic ducts in which dust particles will be detected in the gas flow. Its area of application begins at dust levels ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
The UV transilluminators feature a uniform and bright illumination. The exclusive application of high-grade filter glass provides for excellent documentation results with lowest background signal. The great illumination uniformity allows the reliable quantification of electrophoretically separated fluorescent ...
-
Manufactured by Freudenberg Filtration Technologiesbased in GERMANY
The premium class of patent quality: Viledon MaxiPleat MX 75 cassette filters have excellent technical properties that create optimum media velocity with low pressure drops even at high volume flows. The high stability of the entire filter construction offers reliable operation, even under extreme ...
-
Manufactured by Euro SITEX s.r.o.based in CZECH REPUBLIC
Round mesh represents one of the most commonly used types of holes. This type of perforation is available in the widest range of holes, sheet dimensions and materials. Perforated sheets with round mesh are used in nearly every branch of ...
-
Manufactured by Muntersbased in USA
DF 2100 is a ready-to-install droplet separator for use in many application areas. It is available in various material combinations and configurations to fit a wide range of operating conditions. DF 2100 droplet separator provides high efficiency droplet separation and low pressure drop, even at high face velocity, for energy saving operation. The droplet separator can be configured to most ...
-
Manufactured by PROTRONIX Ltd. (s.r.o.)based in CZECH REPUBLIC
ADS-VOC-24 is used to control ventilation, air cleaners and to monitoring of the air quality in the people occupied areas like restaurants, kitchens, facilities and likewise. ADS-VOC is space gaseous air pollutants sensor with analog voltage output 0 – 10V and output relays with adjustable levels of switching. The sensor has a high sensitivity at low concentrations of pollutants in the air ...
-
Manufactured by PROTRONIX Ltd. (s.r.o.)based in CZECH REPUBLIC
ADS-SMOKE is an indoor air quality sensor with analog voltage output 0 – 10 V and an output relay with adjustable switching level. The sensor has a high sensitivity to low concentrations of pollutant gasses in the air. For example carbon monoxide and hydrogen, those are contained in the cigarette smoke. Therefore is the ADS-SMOKE appropriate for use in areas polluted by cigarette smoke. ...
-
Manufactured by PROTRONIX Ltd. (s.r.o.)based in CZECH REPUBLIC
ADS-RH is a capacitive relative humidity (RH) sensor. It is equipped with an output relay with adjustable switching level and with 0 – 10 V analog output. The measurement is performed periodically after about 8s. Based on these measurements it is possible to directly control the ventilation, air conditioning and heat recovery ...
-
Manufactured by Kemper GmbHbased in GERMANY
KemJET is a central ventilation system for workshops where local exhaust ventilation systems are not feasible or it is used to supplement such systems. It effectively protects employees and machines from fine dust. The heated, purified air remains in the room, so that in the winter heat from the heating system is retained. This, way large energy cost savings can be ...
-
Manufactured by TES VSETIN s.r.o.based in CZECH REPUBLIC
Our expertise in the production of testing equipment is rooted in our long tradition in the design and production of electric drives with dynamometers. Our products may be used to test combustion engines, electric rotating machines, fans, pumps, compressors, gearboxes, distributor gears and whole vehicles. Our supply includes the complex technical solution of the whole test stand, including all ...
-
Manufactured by Kemper GmbHbased in GERMANY
Push-Pull ventilation system is an outlet and inlet system where the pipes are mounted opposite each other and which is connected to a suction and filter system. The system is suitable for workshops with low to medium levels of smoke and dust where a spot extractor system is not feasible or it is used to supplement spot extractor systems. It is cost effective as the integrated filter system can ...
-
Manufactured by Muntersbased in USA
DF 2800 is a ready-to-install droplet separator for use in many application areas. It is available fit a wide range of operating conditions. DF 2800 droplet separator provides high efficiency droplet separation and extreme low pressure drop even at medium face velocities giving energy saving operation. The droplet separator can be configured to most individual performance and installation ...
-
Manufactured by LDM, spol. s.r.o.based in CZECH REPUBLIC
Control valves series RV 102 are two-way or three-way valves with internal threaded connection. Valve body is made of bronze. Control valves series RV 103 are two-way or three-way valves with flanged connection. Valve body is made of grey cast ...
-
Manufactured by Tionbased in CZECH REPUBLIC
The Breezer Tion O2 is an inflow ventilation system for home and office. The device takes air from outside, cleans, oxygenates and heats it to a comfortable temperature. Choose time- and energy-saving ventilation! At the same time: ...
-
Manufactured by ProMinent GmbHbased in GERMANY
Output 60 – 2,500 g/h of chlorine. CHLORINSITU IIa is a compact on-site electrolysis system for the production of a low-chlorate hypochlorite solution from sodium chloride and electrical energy. A key advantage is its simple process management and excellent system safety through integral ventilation and ...
-
Manufactured by Sollau s.r.o.based in CZECH REPUBLIC
Magnetic drum MB with a diameter of 154 mm is a device for automatic and permanent removal of magnetic iron metals from inert ...
-
Manufactured by Muntersbased in USA
The EXTRUdek water distribution system from Munters provides highly durable means of mounting 150mm thick CELdek® evaporative cooling pads and supplying water to the pads. Together these form an ideal complete system for incorporating evaporative cooling into the ventilation system of a structure. Corrosion of metal parts is a frequent problem amongst gutters used to mount evaporative cooling ...
-
Manufactured by RSBP spol. s r. o.based in CZECH REPUBLIC
We very often encounter painting systems with high probability for fire or explosion initiation in various industrial sectors at products‘ surface treatment. The RSBP company has developed its own special systems for spray booths protection and provides a full range of services and products related to spray booths protection from manufacture, through delivery to final assembly and service ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you