VOC Monitoring Equipment For Air And Climate Available In Vatican City
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Our system airmOzone C2-C12 allows you to analyze the VOC thanks to: the calibration system with a bottle or permeation tube, a H2 generator, in-built LCD computer with our own operation software VISTACHROM, airmopump sampling, Peltier effect : for cooling, Airmopure : air generator. Applications in the atmosphere pollution, in the petrochemical fence line and clean air ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
The instrument uses a 6-port valve with a single sorbent trap, and a metallic capillary column. It has a minimum detection level as low as 15 ppt (for 1,3-Butadiene for e.g.) in ambient air, and analyses up to 32 compounds during a single ...
-
PremiumManufactured by Lenntech Water Treatmentbased in NETHERLANDS
The RAP-2 Remote Alarm Panel is for alarming when signals from ozone and VOC monitors reach preset limits or set-points. The alarms are a red strobe light and a loud audible alarm. The RAP-2 also outputs its input signal in 4-20 mA form for building automation systems and other applications requiring long signal paths. The RAP-2 is powered by 14-30 VAC or DC. This remote alarm panel is usually ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme Volatile Organic Compounds Detector, REF-IR-ST Sensor/Transmitter, is designed to detect the presence of refrigerant leaks in enclosed areas. The REF-IR-ST series employs a high-precision NDIR sensor ideal for gas-specific and accurate measurements of the most commercially used refrigerants. With its 1PPM resolution, 0-1000PPM measuring range, and operating temperature and humidity ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/PID for automatic monitoring of BTEX in air, water and soils. This instrument uses a port valve with a single absorbent trap, and a 30 meter metallic 0.28 mm ID column. Minimum detection level as low as 10 ppt for application Benzene or 1,3-Butadiene in ambient air. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Due to the large number of Volatile Organic Compounds (VOCs), there is a need to combine their separation and quantification by Gas Chromatography (GC) with Flame Ionization Detection (FID) and their individual identification by Mass Spectrometry ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The ERMS2000-M movable vehicle emission testing machine/VOC monitoring system, developed by our company, is suitable for mobile enforcement of city roads and stationary enforcement of single lane. Our VOC monitoring equipment can detect the CO, CO2, NO, HC and opaque smoke intensity in gasoline and diesel vehicle exhaust through TDLAS, UV-DOAS, weak signal detection technology and image ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Self-Cleaning Ceramic Filter (SCCF) collects, volatilizes and destroys particulate and condensable organics emitted from industrial process streams. It can be used independently as a filter media on hot and cold process streams or coupled with an oxidation module for total odor, Volatile Organic Compound (VOC) and Hazardous Air Pollutant (HAP) ...
-
PremiumManufactured by Ecomesurebased in FRANCE
Ambient air quality is one of the major environmental and health challenges facing our communities. Regulatory limits for nitrogen dioxide (NO2) and particulate matter (PM2.5, PM10) are frequently exceeded in urban areas. Vehicle emissions are the biggest culprit, but there are plenty of other sources. Heating systems, production plants, incineration plants and agricultural activities also cause ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot PM is a robust particulate matter Monitor that can measure PM levels in the air. This PM detector uses laser scattering technology to measure PM1, PM2.5, PM10, and PM100 concentrations in the air. The industrial PM monitor is equipped with an optical particulate matter sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for automatic, continuous analysis of Volatile Organic Compounds (20 ppb to ppm). The ChromaFID is a gas chromatograph dedicated to the analysis of VOC’s from 20 ppb to ppm levels. The analyser enables the continuous monitoring of the concentration of VOC compounds from C1 to ...
-
PremiumManufactured by Simple Solutions Distributing LLCbased in USA
The Hi-Flow Radial Filter (HRF-5) is an activated carbon radial molecular air scrubber. It captures VOCs and particulate matter in a broad range of environments. It has a small footprint with a diameter of just 22.5". It can handle up to 1,000 CFM (when recirculating). The HRF is made of 16-gauge steel and is available in stainless steel. It can be ducted into existing HVAC systems or be used ...
-
PremiumManufactured by Genesis Water Technologies, Inc.based in USA
Our Coconut Shell Activated carbon media is available in granular form in the following mesh sizes, 8×30 mesh, 12×40 mesh, and 20×50 mesh for liquid water purification. Our coconut shell activated carbon media is used in both commercial/industrial process water, to remove trace hydrocarbons, volatile organic compounds, low weight organics such as BTEX, color, and pesticides. It ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC PID for automatic monitoring of compounds, in air, water or soils: This instrument uses a port valve with a loop, and a metallic 0.53 mm ID column. It has a minimum detection level of ppb. Miniaturization, sensitivity, mobility and flexibility are its main features. Everything from the sample port up to the data storage is integrated in a 19' rack 4U. Isothermal oven in standard (programmed ...
-
PremiumManufactured by Voss Technologies, Inc.based in USA
The SingleSample pressurized disposable bailer system is designed to provide an easy method for filtering metal samples in the field. The pressurized bailer's rugged HDPE construction permits use for both bailing and sampling wells while eliminating cross contamination and decon time. 36" overall length, 1.5" ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A GC/FID instrument for BTEX monitoring in air, water and soil. The airmoVOC BTX is a gas chromatograph for the analysis and monitoring of trace amounts of benzene, toluene, ethylbenzene (m/p/o) xylene by FID ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
SCI -801 is a professional micro-instrumentation, which can online monitor TVOC, temperature, and humidity in the atmospheric environment. With wireless communication technology, a large number of sensor nodes can communicate with servers securely and send large environmental data to the cloud platform. Conventional Air Quality Monitoring System does not cover most places of cities/ towns and ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-200A alarm online TVOC monitoring system adopts the PID photoion method for gas detection. The UV light produced by ion lamp irradiates on target gas, and the gas will be ionized after absorbing enough UV energy. The target gas concentration can be detected through the small current produced by gas ionization. ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
Most sensitive model: This unit offers our lowest detection limits with a standard 17 meter sample path. Depending on your application, the path length may be increased up to 22 meters for a 20% improvement in detection ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you