VOC Remediation Equipment For Air And Climate Available In Thailand
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
The Anguil Emission Concentrator is an adsorption system designed to concentrate large volume, low concentration process exhaust into a much smaller, higher concentrated air stream. The greatly reduced flow with higher Volatile Organic Compound (VOC) concentration is sent to a thermal or catalytic oxidizer for VOC destruction. The destruction device can then be much smaller in size, significantly ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Permanent Total Enclosures (PTEs) provide numerous advantages for manufacturers who paint, spray, coat or apply solvent based materials to their product. The primary function is to provide 100% capture of all fugitive over-spray of harmful air pollutants used within the enclosure, maximizing the capture and control efficiency of the facility. This results in fewer uncontrolled emissions being ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT 500 is a seamless, spray-applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT 500 is economically formulated specifically for horizontal applications. LIQUID BOOT 500 spray application directly to penetrations, footings, grade beams, pile caps and other irregular surfaces, provides for a fully-adhered gas vapor ...
-
PremiumManufactured by CETCObased in USA
LIQUID BOOT LT is a seamless, spray applied, water-based membrane containing no VOCs, which provides a barrier against vapor intrusion into structures. LIQUID BOOT® LT is installed under slab and on below grade vertical walls as a vapor barrier to minimize vapor and nuisance water migration into buildings. LIQUID BOOT® LT spray-application directly to penetrations, footings, grade beams, ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
-
PremiumManufactured by Synspec BVbased in NETHERLANDS
For the accurate and reliable monitoring of VOC concentrations, every analytical instrument needs to be calibrated periodically. Synspec supplies various multi-point calibration stations for the validation of your ...
-
PremiumManufactured by Chemtronics Technologies (India) Pvt. Ltd.based in INDIA
Portable air ozonators are ideal for odor control and disinfection. Portable air ozonators are widely used in hospitality industries, food processing industries, corporate offices, beverage industries, bakery, dairy, hospital and many ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Our system airmOzone C2-C12 allows you to analyze the VOC thanks to: the calibration system with a bottle or permeation tube, a H2 generator, in-built LCD computer with our own operation software VISTACHROM, airmopump sampling, Peltier effect : for cooling, Airmopure : air generator. Applications in the atmosphere pollution, in the petrochemical fence line and clean air ...
-
PremiumManufactured by Avecom NVbased in BELGIUM
Are you grappling with the challenge of chlorinated volatile organic compounds (Cl-VOCs) contaminating your soil and groundwater? Environmental compliance has become a pressing concern for businesses worldwide. Stringent regulations demand active measures to address the presence of hazardous pollutants like chlorinated VOCs. That’s where Multidechlorobac steps in as your trusted ally, ...
-
PremiumManufactured by Jacobi Groupbased in SWEDEN
Activated carbons designed for air and gas treatment, covering a diverse set of applications including VOC abatement in air, odour control, solvent recovery, process gas purification, residential and commercial air treatment devices, cigarette filters, and cabin air filters and evaporative loss devices in automobiles. ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
Widely considered to be the most energy-efficient oxidizer, Anguil's Regenerative Thermal Oxidizer (RTO) uses ceramic media to recover upwards of 97% of the available energy. What makes our RTO so popular is its ability to repurpose the thermal energy generated during operation to reduce operating costs and energy consumption of the system itself. The regenerative component makes it capable of ...
-
Manufactured by Prodesa Medioambientebased in SPAIN
This technology is based on the adsorption properties of activated carbon or zeolites. Thanks to their porosity, they can adsorb a great part of the organic compounds in the ...
-
Manufactured by CSM Worldwide, Inc.based in USA
Depending on the specific requirements of an air pollution control application, CSM may recommend additional front-end or back-end attachments to ensure that your solution is complete as well as ...
-
Manufactured by Ship & Shore Environmental, Inc.based in USA
S&SE Thermal Recuperative Oxidizers destroy air pollutants emitted from process exhaust streams at temperatures ranging from 1000°-2200°F. A Recuperative Thermal Oxidizer utilize a combustion chamber with multi pass shell and tube type heat exchanger which is fabricated of heavy-duty stainless steel. Temperature, residence time, & turbulence are three important oxidization aspects ...
-
Manufactured by Airprotech - Deurotech Groupbased in ITALY
airprotech supplies zeolite-based VOC rotor-concentrators that are typically installed in case of low concentration of pollutants and large gas flow rate. The volatile organic compounds VOC contained in the laden air flow are concentrated by adsorption in a zeolite-based rotor-concentrator. The cleaned air flow is delivered directly to the exhaust stack. The pollutants concentrated in the ...
-
Distributed by Inghor, S.Abased in SPAIN
The regenerative thermal Oxidation (RTO) is one of the most accepted oxidation technologies nowadays. By means of an oxidation by temperature the destruction of the COVs is got. The typical combustion temperature is 800ºC (1472ºF) while the residence time is of one second. One of the most important characteristics is its low operative cost relative to other purification solutions. It ...
-
Manufactured by Prodesa Medioambientebased in SPAIN
Regenerative thermal oxidizers consist of several vertical prism towers, partially filled with ceramic material, and an oxidation chamber which joins the ...
-
Manufactured by NESTEC, Inc.based in USA
For manufacturers that produce high-VOC emissions, it can be difficult to find the right thermal oxidation system to ensure compliance with the regulations of the EPA or other governing bodies. Many thermal oxidation solutions aren’t equipped to handle high concentrations of VOCs and HAPs over long periods of time and may fail or be damaged by emissions that contain them. Circumstances like ...
-
Manufactured by NESTEC, Inc.based in USA
Though new designs and technologies in thermal oxidation have been discovered since the turn of the century, the core process has existed for decades. Regenerative thermal oxidizers (RTOs) have remained popular for many types of manufacturers due to their longevity, simplicity and immense efficiency. RTOs work by drawing in processed emissions through a fan, heating them to extremely high ...
-
Manufactured by Megaunity Air System Co., Ltd.based in CHINA
The Megaunity Regenerative Catalytic Oxidizer (RCO) is an optimized structural design based on the foundation of the Regenerative Thermal Oxidizer (RTO) with the inclusion of a catalyst. It utilizes the catalyst to lower the activation energy of VOCs" oxidation reactions, allowing VOCs to be oxidized and decomposed into carbon dioxide and water within an environment of 250-350°C. This ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you