Only show results available in Virginia? Ok

Workplace Air equipment for Air and Climate

  • AirMATION - Model AMB-402BBY - Industrial Air Cleaner

    AirMATION AMB-402BBY: For larger capacity needs.

    By Air Technology Solutions based in Loves Park, ILLINOIS (USA). from Industrial Air Cleaner Product line

  • Solar Air Conditioning

    Our Central Air Conditioning is easy to install and this installed unit ensures an even distribution of cool air. Water is pumped to the header which then distributes water to the series of troughs installed. The mechanism of parabolic troughs heats up the water to the significantly higher temperature. The water with high temperature enters in to ...

    By SLT Energy Ltd based in Gandhinagar, INDIA.

  • Model SAM GC-600 - Chemical Hazards Monitor

    The SAM GC-600 Chemical Hazards Monitor is a high-performance analyzer that is based on gas chromatograph technology. It was developed specifically for continuous chemical hazards monitoring, and is used where highly toxic or carcinogenic substances may be present in the production-plant air or in the workplace. Based on its high level of ...

    By Solvias AG based in Kaiseraugst, SWITZERLAND. from Chemical Hazards Monitor Product line

  • Mobile Exhaust Systems

    When a major in-plant emission source is closely related to operations carried out by overhead cranes (e.g. furnace charging and tapping, or pouring from ladles), effective pollution control may be obtained through the use of a Mobile exhaust system. The Mobile exhaust system captures emissions from mobile sources while moving along a track. In ...

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • Intellair - Programmable Logic Controller for Air Control System

    Intellair is a programmable logic controller (PLC) controlled intelligent air control system that optimises the efficiency of dust extraction, fume extraction and ventilation systems by continually monitoring demand and regulating the extraction or supply of air in accordance with that demand. The system has been designed by air movement ...

  • Melting Furnace Emissions Control

    Exhaust ventilation is usually required to control specific oxides associated with the metal being melted or contaminants carried in the scrap charge. IVT Engineering has an unique system that provides the ideal solution to environmental control, particularly the emission control of electric furnaces, which are completely open for charging. We ...

    By IVT Engineering Corp. based in Toronto, ONTARIO (CANADA).

  • Blubox - Lamp Sorting Plant

    Nowadays there are thousands of different types of lamp on the market. From toxic waste to rare earth metals, a wide range of materials is used in lamps and needs to be recycled at the end of the lamp’s life cycle. It is therefore necessary to sort the lamps in order to achieve an efficient recycling rate and good quality recycled products. ...

    By Blubox Trading AG based in Birrwil, SWITZERLAND.

  • Modulair Filter | Baghouse Dust Collector

    Suitable for medium to large sized applications. External unit or Internal for larger buildings. Full Shift with Break. Automated cleaning on shutdown. Fully integrated programmable logic controller system. Screw conveyor. Cleaned air can be recirculated to reduce heat loss from workplace to control heating costs. Compliance with COSHH & E.P.A ...

    By Air Plants Dust Extraction Ltd based in Leicester, UNITED KINGDOM. from Modulair Filter | Baghouse Dust Collector Product line

  • ScrubAir - Air Make-Up Systems

    Ventilation systems will cause negative air pressure in the building during winter seasons when the windows and doors are shut. This reduces the effectiveness of the ventilation system and can create excessive cold drafts and cooling of the building on very cold days – resulting in an intolerable workplace and potential freezing of pipes.

    By ScrubAir Vent Systems, Inc. based in Lake Zurich, ILLINOIS (USA).

  • Rotary Furnace with Air Pollution Control Device

    The Rotary Melting Furnace is a very flexible and universal equipment used for recycling many non-ferrous metals. It is the major lead production technology used in India and many other countries for Secondary Lead Production. A lead production system based on this technology has certain distinct characteristics such as: Equipment scalable for ...

  • Model BS-A - Extraction Benche

    Extraction bench with cartridge filters and compressed air cleaning system The extraction benches are utilised to extract and eliminate dust produced when sanding by hand or with a sanding tool. These benches are equipped with a high-performing centrifugal fan and cartridge cleaning system which utilises jets of compressed air ensuring high and ...

    By Veneta Impianti S.r.l. based in Z.I. Ronchi, ITALY. from Extraction Benche Product line

  • Model LRA 160 - Mobile Soldering Fume Extraction and Filtration Unit

    Soldering operation at manual workplaces. Small soldering systems.

    By ULT AG based in Löbau, GERMANY. from Mobile Soldering Fume Extraction and Filtration Unit Product line

  • Instrumex MicroDustec - Model 500X - Dust Monitoring System

    The MicroDustec 500X is the latest addition in the list of Environmental Monitoring Innovations by Instrumex.  This is the most comprehensive dust monitoring solution that can measure dust particles as low as 0.3μ upto 10μ. Housed in an IP65 protected case, this unit is capable for outdoor continuous ...

    By Instrumex based in Mumbai, INDIA. from Dust Monitoring System Product line

  • DustStar - Sanding Dust Extraction System

    The professional sands and polishes. The DustStar captures the dust. While you sand or polish, your DustStar reliably extracts the fine dust. There can be no better division of labour. The DustStar is easy to use, tremendously effective and of course tested for wood dust (GS-HO-11). Sanding and fine dust is cleaned and discharged through a 2-stage ...

    By Höcker Polytechnik GmbH based in Hilter, GERMANY. from Sanding Dust Extraction System Product line

  • Biobase - Model AS - Air Shower

    Air shower is a necessary passage for person entering clean room in order to minimized the amount of particulate contaminant, achieve workplace strict clean purification standards. Personnel move through the air shower while particulate contaminants are blew off by the clean high speed air. So the dust cannot be brought into clean area.

    By Biobase Group based in Jinan, CHINA. from Air Shower Product line

  • PE-porös - Sound Absorption

    The fine-pored shapes made of PE-porös by KIK offer excellent capabilities for reducing the acoustic pressure at pneumatic equipment substantially. KIK’s PE-porös silencers feature a high level of silencing and a low reduction in volume flow.

    By KIK Kunststofftechnik based in Kleinblittersdorf, GERMANY.

  • Berthold - Model LB 150 D-R α-β - Fixed Filter Monitor

    The α-β-particulates monitor LB 150 D-R uses a fixed filter and is a true real time monitor while collection, detection and evaluation are done simultaneously. The very high sampling rate of 40 m³/h ensures a representative sampling for both stack monitoring with isokinetic extraction as well as room or workplace air ...

    By Berthold Technologies GmbH & Co. KG based in Bad Wildbad, GERMANY. from Fixed Filter Monitor Product line

  • Aget MISTKOP - Mist Collectors

    Coolant, oil, and lubricant mist from metal machining, grinding, or sawing, can result in mist circulating throughout an entire facility.  Often not realized, is that the mist droplets also contain a very fine solid particle of the abrasive or of the metal being processed.  After the worker has the first “opportunity” to ...

    By Aget Manufacturing Company based in Adrian, MICHIGAN (USA). from Mist Collectors Product line

  • CNC Machine Tool Coolant Mist Collector

    The First Stage Centrifugal Separator uses Filtra-Systems patented 'At The Machine' technology. Centrifugal separation is used to remove oil mist from air. Droplets are then gravity-drained back into the machine tool, decreasing coolant losses (and reducing the cost of make-up coolant). Unlike other centrifugal oil mist collectors, there are no ...

    By Filtra Systems based in Farmington Hills, MICHIGAN (USA). from CNC Machine Tool Coolant Mist Collector Product line

  • Oil Mist Filters

    Dustcheck market MAHLE oil mist filters which collect atomised fluids and re-circulate environmentally safe air. Oil mist can cause a serious health hazard and create a dangerous environment if left uncollected by way of slippery surfaces or a grease covered plant and equipment. MAHLE oil mist filters remove oil/lubricant mist generated through ...

    By Dustcheck Limited based in Fenton, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you