Applications available in Belarus
-
Premium
Visual inspection solutions for the plumbing camera in drain and sewage maintenance
Video Inspection of pipelines and sewer systems is becoming more and more important, and is done with a digital camera essentially attached to a push rod to provide the user with a tool inserted down the pipes and that is able to inspect the inside of them, that would otherwise be inaccessible. The plumbing camera is attached to a screen for real time visualization that can also be recorded. These plumbing cameras can help visualize clogs and damage to pipes and sewer systems quickly in residential and commercial ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Application of respirometry system for denitrification testing
Anoxic denitrification requires the presence of an organic substrate to serve as an electron donor. This case study shows how respirometry was used to determine the effect of C/N ratio on denitrification rates. Such testing can be used to determine optimum internal recycle rates or supplemental carbon addition to biological denitrification ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Heavy metal analysis for laboratories
By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY.
-
Premium
Gas analyzers for odorization injection and control
Mercaptans or THT are added to natural gas to make it smell and to make it detectable by the human nose (odorization process and odorization control in pipes). energyMEDOR ppm: 30 years’ experience. The compounds usually used to odorize natural gas vary from one country to another but are usually: Ter Buthyl Mercaptan (TBM) TetraHydroTiophene (THT) MethylEthylSulfide (MES) Analyze H2S and mercaptans concentration in natural gas ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Respirometry system for anaerobic biochemical methane production
Anaerobic biodegradation tests – often referred to as Biochemical Methane Production (BMP) tests – involve addition of known amounts of a chemical or wastewater to anaerobic cultures. The quantity of methane production – relative to that from a control – indicates the biodegradation potential. This case study shows methane production for a Control reactor and three test reactors that were operated at 20-, 30- and 45-day retention times and received three doses of industrial wastewater. The ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Determination of hesperidin and naringin in juices using CAPEL-105M capillary electrophoresis system
The method is intended for determination of hesperidin and naringin using capillary electrophoresis technique in order to reveal adulteration of juices. These components are tested in citrus juices, concentrated juices, nectars, juice-containing beverages, and fruit sauces that are produced primarily from oranges, grapefruits, tangerines, lemons, and limes. ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Optronics – Surveillance systems for Police intervention
Hidden or camouflaged persons pose a threat to police ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Respirometry system for anaerobic toxicity testing
This example shows the results of dosing an anaerobic culture with three concentrations of an industrial cleaning agent followed by respirometric measurement of methane production. The threshold toxic concentration was less than 80 mg/L of product and 600 mg/L produced a 50% decrease in methane production ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Visual inspection solutions for the chimney inspection video cameras
Welcome to our Chimney Inspection Cameras section. Chimney Inspection Cameras are becoming increasingly popular, especially when physical inspection of chimney surfaces is not feasible. This is particularly necessary for small diameter chimney liners, old stone flues in unknown condition, in order to get safety certificates, ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
-
Premium
Visual inspection solutions for the duct HVAC inspections
Duct (HVAC) cleaning is an important part of maintaining good air quality in any building, if ducts are not being cleaned properly, air polluted by dust and other fine particles that can be harmful, will be circulated throughout the system. The best way to ensure ducts are being cleaned completely is to visually inspect them, this can now be accomplished using HVAC inspection cameras. These CCTV cameras are composed of a digital inspection camera attached to a push rod to enable the camera to access all parts of ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Respirometry solutions for monitoring the activity of mixed-liquor solids sector
Sample Type: Mixed liquor solids from an activated sludge process MVLSS = 1320 ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Oxygen monitoring from aerobic and anaerobic for biodegradation tests
Biodegradation tests involve testing samples in response to various parameters: dilution, nutrient addition, pH, temperature, and others. The pattern of oxygen uptake in aerobic tests; nitrogen gas production in anoxic denitrification tests; methane production in methanogenic tests; hydrogen production during glycolysis; and carbon dioxide production during fermentation reactions gives a measure of the rate and extent of biodegradation of the organic constituents of the test ...
By Respirometer Systems and Applications, LLC (RSA) based in Fayetteville, ARKANSAS (USA).
-
Premium
Radon Monitoring for Radon Calibration
Radon monitoring for Radon calibration labs, research and expertise, specific applications (seismic survey, and so ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Measurements Solutions for Wear & Volume Analysis
Measuring volumetric properties of a surface is most often used in wear analysis of lubricated surface but has uses in many other applications such as adhesion, porosity, and particle ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
3D measurement technology solutions for product development and design sector
Product development refers to all of the stages involved in bringing a product to market—from inception through conception and engineering design to product development. Computer-aided design (CAD) software is used as a design tool to enhance product development. As project managers, senior engineers, or engineering directors, you are responsible for finding ideas that lead to new product introduction. Innovation is the essential element that maintains your company’s competitive edge through the ...
By Creaform - AMETEK, Inc based in Lévis, QUEBEC (CANADA).
-
Premium
Mercury monitoring for measuring mercury content in hair
Measurement of mercury content in hair is a convenient technique to estimate dietary exposure without having to handle tissues or bodily fluids. As the mercury present in hair is comprised of different mercury species, full speciation of the compounds is needed for complete understanding. Environment Canada published a technique where treating a basic digestion with Cd2+ in the presence of cysteine allowed analysis of inorganic mercury and total mercury using a Tekran 2600 System. Methyl mercury was then ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Temperature and gas sensing solutions products for thermal processing
Equip yourself with various operating voltages and advanced control. From silicon wafer processing to steel-billet production, thermal processing, including general heat treatment, is used in everything. And to transform your materials into reliable, high-quality, finished products, you need precise ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
ISO 14644-1:2015 continues to pose challenges to cleanroom managers and manufacturers. Here we provide several sources of information to help everyone from those new to this ISO regulation to veterans in the field. Our team of regulatory experts have put together a package of information so you can easily understand the requirements and what you need to do to meet them. Get a summary of ISO 14644-1:2015 by reading the paper below or watching the recorded webinar at the right. We also have FAQs and a paper to learn ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Monitors, gas analyzers solutions for understanding ISO 21501-4
Determination of particle size distribution—Single particle light interaction methods. ISO 14644-1:2015 introduces the need for particle counters calibrated to ISO 21501-4. The calibration methods assure data accuracy and repeatability. The methods outlined in ISO 14644 and ISO 21501-4 represent an important step in more accurate evaluations of clean room contamination and improved process control. ISO 21501, Determination of particle size distribution—Single particle light interaction methods, ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you