Applications available in Alberta
-
Premium
On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
By ENVEA based in Poissy, FRANCE.
-
Premium
Blowers, compressors and gas meters for vacuum technology
Whether in foodstuff or pharmaceutical industry, in the chemistry or process engineering, metall processing or in automotive industry: in many branches of industry most different manufacturing processes require gas conditions with a pressure considerably below atmospheric pressure. A pressure of -700 mbar (300 mbar abs.) is considered as negative pressure. Below 300 mbar absolute the vacuum range begins, subdivided in rough, fine, high and ultra high ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Mercury monitoring for measuring mercury speciation in air
Tekran offers the only completely integrated, automated system for measuring mercury speciation in air. The Tekran 2537, when coupled to the Model 1130 and Model 1135 provides a continuous record of gaseous elemental mercury, gaseous oxidized mercury and particle-bound mercury. Over the past 12 years, the Tekran 2537-1130-1135 system has been the most significant tool used to advance the understanding of the fate and transport of atmospheric mercury. See the Expert’s Corner for details about international ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Blowers, compressors and gas meters for process gas technology
The differences in compressor technologies can be found right where thedemanding applicationsare. Where often highly critical processes gases and coolants are compressed. In thechemical, petrochemical, energy, food, or pharmaceutical industries.The demands on plant design, engineering, documentation and worldwide service in those industries are often just as high as thesafety and environmental guidelinesto be ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Respirometry solutions for modeling of methane and hydrogen production sector
Waste Type: Synthetic (Ethanol). Objective: To model the methane produced from acetate and from hydrogen in cultures receiving ethanol as an input substrate. The objective was to verify the accuracy of models developed on the basis of substrate ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers for pure gases / gas manufacturers for bulk industry
It deals with the quality control according to the following conrol: 4.0 (99.99 %). We can propose this application with the analyser ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Energy Savings Solutions for Oxygen Industry
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Environmental Data Monitoring Solutions for Controlled Atmosphere
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Gas analyzers for deodorization: ppb
The energyMEDOR ppb allows the end user to observe the speciation of each component of the Sulphur present in natural gas, or for quality control of disulphuric gas (ppb) after ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Gas analyzers for U.H.P. industry
Air Liquide, Praxair, Air Products, BOC, Messer, Linde, Takachiho, Aga, etc. need to control the amount of impurities before delivery to customer in petrochemical or chemical ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Refineries and hazardous areas gas analyzers for industrial air monitoring
Chromatotec can propose for hazardous areas (for instance refineries) specific boxes for our analysers : category 1 IIc T4 for ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas analyzers and monitoring systems for carbon capture & storage (CCS)
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Emission Control Solutions for Air Caption & Dedusting
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Gas analyzers for odor: bad smell
The aim: analysis of H2S ppb and mercaptans with the TRSMEDOR because of the bad smell of ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Emission control solutions for clinker cooler and pre-heater dedusting sector
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Gas monitoring instruments and systems for engine emissions measurements
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you