Applications available in Quebec
-
Premium
Trilite - Ion Exchange Resin for Nuclear Power Plant
Ion exchange resins used in nuclear power plants are used in processes such as make-up systems, condensate treatment, and nuclear power plant primary circuits. The water treatment flow for PWR nuclear power plants typically consists of two stages, including the primary circuit and make-up systems, as well as the condensate treatment in the secondary circuit. The ion exchange resins used in the primary circuit must be highly cross-linked resins and have low impurity content and high physical-chemical strength, as ...
By Samyang Corporation based in Jongno-gu, SOUTH KOREA.
-
Premium
Air pollution, emission and process monitoring systems for power generation
ENVEA’s involvement with the Power generation industry over many years has led to the development of a unique range of process optimization solutions, as well as approved (TÜV and MCERTS) technologies for in-stack measurement of gas, particulate and flow concentration. They allow to optimize the whole-plant’s efficiency through measurement & control, facilitate legislative compliance, support ISO 14000 objectives and save operational costs by reducing plant’s maintenance requirements and ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas analyzers for odor: bad smell
The aim: analysis of H2S ppb and mercaptans with the TRSMEDOR because of the bad smell of ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Machineries for cardboard recycling
The need for of shredding cardboard is as diverse as the product. There is cardstock, fine flute and single and multi-wall corrugated of all shapes and sizes. Shred-Tech® has provided cardboard systems for destruction of out of spec packaging, increasing of bulk density for reduced disposal costs and conditioning for further processing into a product such as building insulation. Various methods of material handling have been utilized such as conveyors and air-vey ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Continuous Emissions Monitoring Calibration Systems (CEMCS)
The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers. ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Semiconductor Industry
For over 50 years the semiconductor industry has followed the insight of Moore’s Law to drive continuous innovation in the development of faster, smaller, and more affordable devices that control the electronics we use every ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Smoke generator devices for lev testing, spray booth clearance testing & air tracing
For many years, materials containing isocyanate have been the single biggest cause of occupational asthma in the UK. Vehicle paint sprayers are 80 times more likely to develop occupational asthma than workers in other industries. This is caused by the inhalation of the fine paint mist that is generated when paint spraying. There is a requirement for the measurement and display of 'clearance times' for spray booths / rooms set by the HSE and the Motor Vehicle Repair (MVR) to meet the requirements of Control of ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Water storage tank solutions for mining industry
Due to the remote locations of many mining operations CorGal water storage tanks can provide a vital resource for operations. Stored water is a critical component of a mining operation infrastructure and is commonly used for dust suppression, firefighting reserve or washing ...
By Water Storage Tanks, Inc. based in Austin, TEXAS (USA).
-
Premium
Determination of the mercury concentration in naphtha
Introduction The mercury concentration in crude oil and petroleum products can vary in a wide range of less than 0.1 ppb to dozens ppm. Direct mercury determination in crude oil and petroleum products at the range above 5 ppb is covered by ASTM D7622-10(2015) "Standard test method for total mercury in crude oil using combustion and direct cold vapor atomic absorption method with Zeeman background correction". Mercury determination in naphtha and light petroleum products (condensate, gasoline and diesel fuel) at a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Ultra pure water treatment
Ultra pure water is mainly used in the semi conductor and pharmaceutical industry. Because of the continuing miniaturilisation in the semi conductor industry, the specifications become more strict every year. Ultra-pure water contains by definition only H20, and H+ and OH- ions in equilibrium. Therefore, ultrapure water conductivity is about 0,054 uS/cm at 25oC, also expressed as resistivity of 18,3 ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Ambient air quality monitoring solutions for tunnel monitoring
Car tunnels need ventilation in order to keep air pollution below the limits. When the pollution levels reaches a setpoint, the fans must be started and kept running until the pollution levels ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Flow - Control and Floating Skimmer Systems for Catastrophic Spill
Advancing Oil Spill Processor Accumulates, Separates, and Conditions Oil and Debris Grinder. Completely operator controlled for Spill Specific optimization of operation. The Model 19300 is a high volume, debris grinding, oil spill processor for maximum oil recover efficiency in water and debris environments common of offshore oil ...
By Skim-pak based in Dublin, CALIFORNIA (USA).
-
Premium
Digestion method ISO11466
it is a soil aqua regia digestion method ISO11466 using ODLAB's Graphite Acid Digestion System with unique Telfon ...
By ODLAB based in Gwangmyeong-si, SOUTH KOREA.
-
Premium
Open Channel Flow Measurement solutions for determination of Wastewater Treatment Plant - Intake Area
Application: Rectangular channel, width 1.0 m. Part filled. Made of concrete. Strong fluctuation between daily and nightly ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Multiprobes for Harmful Algal Bloom
HABs – Monitoring for Algal Blooms can help determine if, and when they become harmful. Detect Harmful Algal Blooms before they become harmful to people and animals with Eureka ...
By Eureka Water Probes based in Austin, TEXAS (USA).
-
Premium
Continuous emissions monitoring for real driving emissions
There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our core ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Treatment of industrial wastewater with high oil content
This type of waste water is characterised by high oil and grease loads from ...
By Toro Equipment S.L. based in La Cisterniga, SPAIN.
-
Premium
Water Testing for Textile Manufacturing
The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Gas monitoring instruments and systems for stack testing according to EPA test method 320
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Industrial wastewater treatment for the mechanical industry
Industrial wastewater treatment for the mechanical ...
By C&G Depurazione Industriale S.r.l. based in Rignano S.Arno (Firenze), ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you