Applications available in Cuba
-
Gas detection analyzers solutions for pollution control industry
Government and environmental groups are forcing industries with medium to high VOC exhausts to reduce emissions by as much as 98%. Incineration using pollution control devices such as oxidizers and flare stacks is one way to bring the exhaust emissions in line with the regulations. Capturing and reusing solvent in a solvent recovery system is another ...
By Control Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA).
-
Gas detection analyzers solutions for pulp & paper mills industry
Flammable non-condensible gases (NCG’s) are byproducts of the wood pulping process. Health and pollution regulations prohibit the release of these gases into the atmosphere. They are usually eliminated by passing them through an incinerator or by using them as fuel in the burner of a boiler or kiln. The incinerator, boiler or kiln however can be damaged by NCG’s which have built up explosive levels. Pulp mills require the use of our PrevEx Flammability Analyzers to monitor the NCG stream and detect and ...
By Control Instruments Corporation (CIC) based in Fairfield, NEW JERSEY (USA).
-
Determination of Mercury in Water Samples by HG-AFS
Mercury and its sompounds are highly toxic materials and can be transferred into the human body via water; the concentration of mercury in water generally is very low. With the superior sensitivity of Aurora's Atomic Fluorescence Spectrometer, the LUMINA 3300, direct measurement of mercury in water sample is ...
By Aurora Biomed Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).
-
Air scrubber wastewater solution
Air Scrubbers strip out contaminants from exhaust stacks typically by trickling a stream of salt solution through a bed of media to extract contaminants by putting them into solution. The salts found in these solutions are typically sulfates, chlorides, and carbonates. Air Scrubber wastewater tends to have high total dissolved solids (TDS) or salts. Air Scrubber Wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Ink, Paint, and Glue wastewater solution
Ink, Paint, and Glue wastewaters are some of the toughest wastewaters to deal with due to their tendency to coat functional components of the wastewater treatment equipment. This type of wastewater is typically treated in the ENCON Drum Evaporator. Qualification of the waste stream for the Drum Evaporator is performed via a bench scale test in the ENCON ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Metal finishing wastewater solution
Metal finishing wastewater is a common application for ENCON Wastewater Evaporators. There are many types of wastewater generated in metal finishing. These include vibratory / tumbling wastewater, stamping wastewater, die casting wastewater and polishing wastewater. Metal Finishing wastewater cannot be simply flushed down the drain. Many companies choose to avoid the headaches of labor-intensive wastewater treatment technologies such as chemical treatment or filtration and simply pay to haul the wastewater. This ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Spent coolant wastewater solution
Waste coolant or spent coolant wastewater is one of the more common applications for ENCON Wastewater Evaporators. The most common type of coolant is made up of water-soluble oils, but water-soluble synthetics or semi- synthetics are also used. The coolants are used to cool the tool and part to minimize overheating during machining and grinding applications. The coolant is collected in sumps and continuously recirculated. In time, the coolants break down and become less effective. The coolants, now spent, must be ...
By ENCON Evaporators based in Hooksett, NEW HAMPSHIRE (USA).
-
Liquid Chromatography for soil consultancy
Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all ...
By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).
-
Gas and particulate monitoring for vehicles
By Enviro Technology Services Ltd - part of Cura Terrae based in Stroud, UNITED KINGDOM.
-
Continuous emission monitoring for power plants
By Enviro Technology Services Ltd - part of Cura Terrae based in Stroud, UNITED KINGDOM.
-
Odour monitoring for some industries
By Enviro Technology Services Ltd - part of Cura Terrae based in Stroud, UNITED KINGDOM.
-
Surface water quality monitoring
By HORIBA Europe GmbH based in Leichlingen, GERMANY.
-
Liquid chromatography–mass spectrometry for laboratories
By F-DGSi based in Evry, FRANCE.
-
Gas spectroscopy for laboratories
By F-DGSi based in Evry, FRANCE.
-
Combination water jet cleaning / sewer cleaning
We have numerous requests each year for high-pressure sewer cleaning machines. We are in the unique position to be able to offer “combination” water blast/sewer cleaning units that provide more versatility than a standard 2,000 psi or 3,000 psi (140 to 206 bar) sewer ...
By NLB Corp. based in Wixom, MICHIGAN (USA).
-
FoamFatale Storage Tank Fire Suppression System
Welcome to the new era of tank fire protection! Discover FoamFatale's breakthrough automatic, AFFF Self-Expanding Foam System (SEFS) for cone roof, internal floating roof and open-top floating roof tanks. No need for proportioner, aspirating device, foam chamber, pourer, just pure fire suppression even for the full surface of a large scale open-top floating roof ...
By FoamFatale Greece Ltd. based in Thessaloniki, GREECE.
-
Application for slow speed metals processing shredding
SSI offers a variety of low-speed, high-torque shredders for volume reduction and recovery of ferrous and non-ferrous scrap metal materials.. Metal processing is a great application for slow speed shredding technologies. SSI has many customers processing metals all around the ...
By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).
-
Beach & Shoreline
For oil spill response in beach and shoreline environments DESMI offers a whole host of equipment to handle any eventuality. The smaller sizes of Ro-Boom and Ro-Beach are unequalled in application and robustness while the range of lightweight Troilbooms can meet the lower cost expectations. In addition the famous Termite and Mini-Max weir skimmers are proven performers in recovery. Recovery systems are also available in vacuum designs from the well-known Ro-Vac to the highly portable Ro-Vac Mini – the latter ...
By DESMI A/S based in Noerresundby, DENMARK.
-
Aerosol and particle technology for operational safety industries
During the production, the conveyance and the filling of solid particles in the form of powders, bulk materials, granulates, pellets and many other shapes, dust is generated as a rule. This dust formation can lead to an impairment of the operational safety and the reliability of the production process, e. g. by means of inhalable dust fractions. The workplace hygiene can also be endangered, e. g. through dust ...
By Palas GmbH based in Karlsruhe, GERMANY.
-
Chemical dosing pumping for the paper industry
By Sera GmbH based in Immenhausen, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you