Applications available in Gambia
-
Premium
Refineries and hazardous areas gas analyzers for industrial air monitoring
Chromatotec can propose for hazardous areas (for instance refineries) specific boxes for our analysers : category 1 IIc T4 for ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Blowers, compressors and gas meters for vacuum technology
Whether in foodstuff or pharmaceutical industry, in the chemistry or process engineering, metall processing or in automotive industry: in many branches of industry most different manufacturing processes require gas conditions with a pressure considerably below atmospheric pressure. A pressure of -700 mbar (300 mbar abs.) is considered as negative pressure. Below 300 mbar absolute the vacuum range begins, subdivided in rough, fine, high and ultra high ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Mercury monitoring for manual analysis of air traps
The Tekran 2600 versatility is evident with the economical and convenient configuration for manual analysis of air samples collected on gold cartridges. Converting the instrument allows calibration by simple injection of gaseous Hg using the Tekran 2505. Once analyzed, the gold cartridges are immediately ready for ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Gas analyzers for odor: bad smell
The aim: analysis of H2S ppb and mercaptans with the TRSMEDOR because of the bad smell of ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Emission Control Solutions for Air Caption & Dedusting
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Thermoformed plastic solutions for cooling tower sector
Brentwood engineers reliable cooling tower components, including film fill media and drift eliminators, designed to provide long-lasting performance in industrial and commercial applications. Expertly engineered cooling tower components and solutions built on a foundation of comprehensive polymer knowledge, diverse worldwide manufacturing, and superior customer ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Blowers, compressors and gas meters for process gas technology
The differences in compressor technologies can be found right where thedemanding applicationsare. Where often highly critical processes gases and coolants are compressed. In thechemical, petrochemical, energy, food, or pharmaceutical industries.The demands on plant design, engineering, documentation and worldwide service in those industries are often just as high as thesafety and environmental guidelinesto be ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Emission control solutions for clinker cooler and pre-heater dedusting sector
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Environment Chambers for HVAC Industry
Air Conditioning, Heat ...
By Aralab based in Albarraque, PORTUGAL.
-
Premium
Compressed-air technology
You are looking for a compressed-air station which is specially optimized for your case of application? In addition to customised product solutions, AERZEN supports you within the entire development cycle, from the conception to the implementation and commissioning of your compressed air ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Energy Savings Solutions for Oxygen Industry
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas detection in industrial gases
Industrial gases include all companies which manufacture atmospheric Gases, specific gases, semi-conductor gases and supply them to end users in different ways: on-site, cylinders, tanks to be used in lot of industrial manufacturing ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Air pollution control for ventilation air methane industry
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Ozone Generator for Cooling Tower
The treatment of cooling towers with ozone is not only good for the environment but also good for the bottom line. Ozone, a powerful biocide and oxidant , affords several advantages over the traditional chemical treatment of cooling towers, ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Respirometry solutions for modeling of methane and hydrogen production sector
Waste Type: Synthetic (Ethanol). Objective: To model the methane produced from acetate and from hydrogen in cultures receiving ethanol as an input substrate. The objective was to verify the accuracy of models developed on the basis of substrate ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you