Applications available in Grenada
-
Premium
Determination of acetic acid (acetate anions) in natural, drinking, and waste water
Introduction The method is used for the determination of acetic acid (as acetate ions) in the samples of natural water, drinking water, and waste water by capillary ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Premium gas generators and calibration solutions for liquid chromatography (LC; LC-MS) sector
LNI Swissgas is a leading manufacturer of innovative gas generators designed to meet all gas requirements for LC/MS ...
By LNI Swissgas based in Versoix, SWITZERLAND.
-
Premium
Magnets for the aggregate & quarrying industry
The Master Magnets range of equipment protects crushers and other processing machinery from damaging tramp metals. Magnetic Separators are also used to remove any metal contamination from within the final product to ensure optimum cleanliness and maximum product ...
By Bunting - Redditch based in Redditch, UNITED KINGDOM.
-
Premium
Ultrasonic Sensors for Water Monitoring
Senix ToughSonic Ultrasonic Transmitters measure water level using “non-contact” technology that looks down at the water from above. These sensors are used in open air and in stilling tubes that constrain the sound and improve performance. They are easy to use and reliable, and thousands are installed applications around the world for irrigation, stream monitoring, flood and tsunami warnings and sea level monitoring. Our General Purpose Sensors are housed in 316 stainless steel suitable for outdoor ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Piping & ducting solutions for the pulp & paper industry
The manufacture of pulp and paper products poses a unique set of conditions, and it’s imperative that the proper types of materials are used in the manufacturing process. Proco Products, Inc. has created a line of expansion joints that are ideal for use in pulp and paper applications, being manufactured from durable, non-corrosive materials that hold up under elevated pressures and temperatures. Proco operates worldwide, and maintains one of the largest product inventories in North ...
By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).
-
Premium
Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
The most important ions which naturally occur in plant tissues are sodium, potassium, calcium, magnesium, nitrate, sulphate and phosphate. A sample of 5 g of oven-dried plant material contains on average, 25 mg calcium, 9 mg magnesium, 80 mg potassium and 3 mg sodium. The recommended method for the measurement of calcium is to precipitate the calcium as an oxalate, the precipitate is then dissolved and measurement taken from the resulting solution. Sodium and potassium may be measured directly following an ashing ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
-
Premium
Octaform – Water & Wastewater Containment
A proven PVC stay-in-place concrete forming system to extend service life and performance of water containment and digestion tanks – offering a durable, water-tight membrane that is highly resistant to corrosion and low-pH ...
By Octaform Systems Inc. based in Vancouver, BRITISH COLUMBIA (CANADA).
-
Premium
High-end baling and waste compacting solutions for plastic film sector
Plastic film, which is also called plastic film packaging, is made of soft polyethylene (PE) and used for grocery and bread bags, shrink wrap and other ...
By Presona AB based in Tomelilla, SWEDEN.
-
Premium
Multiple-beams Wind Profile Lidar
The WindMast WP350 is a wind profile lidar with wavelength of 1.55μm, based on the principle of four-beam velocimetry. The wind speed information was retrieved, and vertical and horizontal profiles were calculated via power spectrum estimation of sampled echo signals through the measurement of the atmospheric wind ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Building Materials solutions for foundation waterproofing systems sector
Protect your structure with proven, industry-leading waterproofing technology and quality assurance program. With more than 60 years of experience in waterproofing technology, CETCO has garnered worldwide recognition for quality, performance and reliability. From underslab, property-line, and backfilled wall applications, you can be assured of optimum performance for all your foundation waterproofing ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Smoke generator device for clean room solutions
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the clean room environment that is being served. Testing is necessary since HEPA filters ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Gas flow management solutions for gas chromatography calibration sector
Environics Gas Mixers, Dilutors and Dividers have been the used in laboratories for over twenty years for applications including gas chromatography-mass spectrometry (GC-MS), GC with Flame Ionization Detector (GC-FID), and GC with thermal conductivity detector (GC-TCD). Our systems can produce gas concentrations from percent to ppb levels at the required flow rates for single or multi-point calibration. In all cases, Environics mixers allow you to use less expensive single-gas cylinders or bulk tanks in place of ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
ADVANCEES - Custom skid-mounted water purification equipments for building trades industry
We offer a complete line of solutions as follow: Desalination by reverse osmosis, brackish water reverse osmosis, multimedia filters, feed pump & feed pump skids, EDI, pre & post treatment options, membranes, softners, services & ...
By Advanced Equipment and Services, Inc based in Coral Springs, FLORIDA (USA).
-
Premium
Thermoformed plastic solutions for stormwater management industry
StormTank products are designed to provide strong, affordable stormwater management solutions. By allowing for pretreatment and offering underground storage options, this product line protects our environment and creates developable ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
On-line gas, particulate analyzers, flow monitors, data acquisition for food industry
Hygiene is the most important in the food industry! In addition to compliance with certain hygiene regulations or food safety, the increase in production as well as the cost reduction are key factors of the food industry. SWR is your partner for process-optimized measurement of solids and competent support in your industry! Absolute hygiene is crucial. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Measurements Solutions for Optical Material Homogeneity
An important property of an optical component is the variation of the refractive index of the material from which it is made, broadly referred to as homogeneity. Material inhomogeneity causes variation of the refractive index in a glass, which can be in the form of sharp, cord-like regions called striae or it can occur as a gradient of the refractive index through a larger region of the sample. Material index variations must be qualified to ensure their impact is within tolerance for a particular optical design ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Water treatment solutions for energy industry
Water treatment solutions for energy ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Water treatment solutions for oil and gas industry
Genesis Water Technologies understands the consistently evolving and increasing demands to treat flowback produced water in the oil & gas industry. In addition, we understand the necessity for sustainable produced water treatment solutions to handle the evolving regulatory, fiscal and environmental challenges faced by this industry. Decreased availability of water and increased environmental regulations relating to produced water from unconventional shale gas exploration “hydraulic fracking” and ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Ceramic membranes and pressure vessels for biotechnology / chemical industry
In chemical and biotechnological applications, we use our ceramic membranes successfully for protein concentration, cell separation, recovery of catalysts, filtration of dyestuffs, and ...
By atech innovations gmbh based in Gladbeck, GERMANY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you