Applications available in Guatemala
-
Premium
Determination of benzene in gasoline
Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Electronic pressure measurement devices for oil and gas industry
Scientists these days believe that the natural resources of oil and gas are not quite as finite as thus far assumed. These resources are likely to remain available considerably longer than hitherto ...
By BD|SENSORS GmbH based in Thierstein, GERMANY.
-
Premium
Multiprobes for Oil & Gas
Oil & Gas – Need on-site water quality monitoring for your operation? Eureka has the sensors to meet your ...
By Eureka Water Probes based in Austin, TEXAS (USA).
-
Premium
Activated carbons solutions for oil and gas industry
The Challenge: Managers of petrochemical facilities today are faced with striking a difficult balance between optimizing the operating the refinery to maximize profits and complying with increasingly stringent environmental regulations governing air and water emissions from the facility. Jacobi fully understands the scale and nuances of refinery operations, and we have developed a full range of activated carbons to meet every challenge in typical refinery ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
3D measurement technology solutions for non-destructive testing (NDT) for oil and gas sector
Non-destructive testing (NDT) is an inspection and analysis technique used by the oil and gas industry, among others, to evaluate the properties of pipelines without destroying the serviceability of the original system. Surface corrosion, mechanical damages, and cracks are the most common discontinuities detected by visual ...
By Creaform - AMETEK, Inc based in LĂ©vis, QUEBEC (CANADA).
-
Premium
Industrial equipment solutions for oil and gas industry
Industrial equipment solutions for oil & gas ...
By Koller Maschinen- und Anlagenbau GmbH based in Celle, GERMANY.
-
Premium
Analytical Instruments for Oil and Gas Industry
When it comes to ensuring product quality and optimizing processes, identifying elementary impurities is absolutely essential for quality control laboratories in refineries and in the production of secondary fuels. We can provide you with a variety of detection solutions developed for industrial routine applications with very high sample volumes as well as for experimental laboratories with frequently alternating areas of focus in their chemical analysis. Analytik Jena’s diverse range of solutions keeps you ...
By Analytik Jena - an EndressHauser Company based in Jena, GERMANY.
-
Premium
Water treatment solutions for oil and gas industry
Genesis Water Technologies understands the consistently evolving and increasing demands to treat flowback produced water in the oil & gas industry. In addition, we understand the necessity for sustainable produced water treatment solutions to handle the evolving regulatory, fiscal and environmental challenges faced by this industry. Decreased availability of water and increased environmental regulations relating to produced water from unconventional shale gas exploration “hydraulic fracking” and ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Determination of fatty acid methyl ester (fame) content in diesel fuel or domestic heating fuel by MID-IR spectroscopy
Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Industrial filtration solutions for the oil & gas industry
Industrial filtration solutions for the oil & gas ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Emission control solutions for oil & gas industry
In Fluid Catalytic Cracking (FCC) processes, widely used in oil refineries, the separation and recovery of powder catalysts is a major concern. Particularly, the concentration of catalyst after the FCC regenerator is usually over 150 mg/Nm3. Since these levels of emissions didn't represent any environmental harm in the past, they were not controlled by any separator or filter. Plant managers main concern was to clean a fraction of the gas to produce energy in a Turbo Expander, or similar, while concentrating the ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Water treatment solutions for oil & gas industry
Oil Field Operation, Control Scale & Corrosion, Remove H2S, Control Paraffin, Remove and Control Iron Sulfide, Treat Frack Water, Remove Biofilm, Treat Black Water, Break Emulsion, Treat Sour Water, Desalter Wastewater, Strong ...
By Jenfitch INC. based in Walnut Creek, CALIFORNIA (USA).
-
Premium
Oil Water Separators for Oil and Gas
Oil and Gas Produced Water, Flowback Water from Hydraulic Fracturing, Oil ...
By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).
-
Premium
Visual inspection solutions for the oil and gas industries
For the oil and gas industry, Medit strives to deliver high-quality products that detect corrosion and inspect welds in a variety of situations and conditions, while helping to improve productivity. Our leading edge inspection solutions boost productivity, help you improve safety and solve your toughest inspection ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Fully-automated gas chromatographs solutions for oil & gas industry
For the international oil and gas industry Synspec instruments are used for process, fence line and stack emissions monitoring. Whether it is about aromatics, mercaptans or olefines the industrial end-users retrieve data of concentrations of chemical compounds for optimisation of their process ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Pumps and Dredging Systems for Offshore dredging
Offshore extraction and energy production activitiesrepresent a constantly evolving technical challenge. The use of wind and wave energy will make the installation of plants on the high seas more and more frequent. Propermaintenance of offshore platforms and infrastructuresis essential in terms of efficiency and reduction of environmental ...
By Dragflow S.r.l. based in Roverbella (MN), ITALY.
-
Premium
Erosion and dust control solutions for oil & gas industry
Envirotac line of polymers are the perfect solution for oil roads, oil pads, storage areas, and even frac pond lining. When Envirotac bonds the soil particles, it will create a tough durable surface that will withstand heavy loads and adverse weather conditions. It works better than conventional methods at a fraction of the cost. The time frame required to construct with Envirotac is greatly reduced, so you can start work ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Piping & ducting solutions for the oil & gas industry
Oil and gas industries are broad in nature, ranging from the exploration and extraction of petroleum, to the refining and transportation of petroleum products. These types of businesses are crucial to the well-being of most large economies, so making sure that the best quality parts are being used is of the utmost importance. PROCO Products supplies nothing but the best, high-quality, durable check valves and expansion joints for use in the oil and gas industries. PROCO operates worldwide, and maintains one of the ...
By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).
-
Premium
Mineral-based technologies solutions for the Oil & Gas industry
The Global Leader in Handling and Treating Complex Water and Fluid Challenges. The Energy Services segment has, for decades, been the recognized leader in serving two major markets: Oil & Gas and Industrial Wastewater, providing innovative products, services and solutions, and handling and treating COMPLEX water and fluid challenges, cost effectively for their customers worldwide in 14 locations and 10 ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
The sample of biodiesel is weighed into a crucible and placed in a heating muffle furnace. Two temperatures are used in the heating program for the dry decomposition: the first temperature (250ºC) is maintained for 1 hour to dry the sample. After this the temperature is progressively elevated to 600ºC and maintained for 4 hours to eliminate the remaining organic material. ...
By BWB Technologies Ltd. based in Newbury, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you