Applications available in Guatemala

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Ozone Water Treatment for Filamentous sludge

    Filamentous sludge is a common problem at activated sludge plants. With ozonation of the return sludge flow it is possible to reduced the amount of filamentous bacteria in the sludge and significantly increased the settling properties of the sludge.This in turn means better performance of the activated sludge process. When a bioreactor is connected to the sludge line the removal of the damaging filamentous bacteria means higher quality sludge in the bioreactor, which leads to higher biogas production.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Odors control for solid waste

    A solid solution for solid waste odors. All areas of solid waste handling are, by nature, odorous affairs. Municipal sludge, municipal solid waste, landfills, composting and co-composting facilities all generate odors that can be offensive to workers and the community at large. The process is a complex one, with multiple drops, collections, transfers and sortings of recyclable and non-recyclable material. Combustible materials are then incinerated for energy production.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Fluence MABR technology - low-energy nutrient removal for wastewater treatment

    Fluence MABR (membrane aerated biofilm reactor) technology address the critical challenges of wastewater treatment plants for: nutrient reduction, high effluent quality, compliance with regulations, minimized energy consumption, at a small footprint, whil

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Oil Spill Bioremediation

    The OSEI Corporation manufactures a first response bioremediation product Oil Spill Eater II that has been used to clean up leaks around storage tanks from valve breaks, line breaks and small holes in tanks, as well as for tank sludge clean outs. OSE II has been cleaning up oil/hydrocarbon based spills including heavy oils, sludge, drilling mud, tailings as well as refined product since 1989.

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Dürr MEGTEC provides roll-to-roll drying, curing and thermal air handling systems for coating and laminating applications. Whether you need a small, value-priced roll support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr MEGTEC has the products and services to meet your requirements. Our technical application and design engineers work with your process specialists or OEM suppliers to design systems that will provide reliable, high production...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Water Testing for Automatic Rinse Tank Controls

    Proper rinsing is one of the most important steps in quality manufacturing or metal finishing. Plenty of low cost, good quality water for rinsing has been available in the past, so rinse water conservation has been largely ignored. Today, this is no longer true. Tap water costs have increased dramatically. Various new regulations are now in effect which limit the allowable volume of wastewater. Others require wastewater treatment. Still other laws tax the amount of water going down the sewer. These factors have...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Ozone Water Treatment for Pharmaceutical Residue Industry

    About a decade ago it became known that pharmaceutical residue in river water had caused fish to change sex. Recent studies show that pharmaceutical residue alters behavior of perch. Many studies have concluded that waste waster contains micro pollutants like pharmaceutical residue. This water is released from our waste water treatment plants into the environment without proper treatment. Many countries in Europe are now taking political action to reduce the effects of the pharmaceutical residue. In Switzerland,...

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriately...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Ozone Water Treatment for Textile Wastewater Treatment Industry

    Wastewater that is discharged by dye manufacturing and textile finishing industries has become an environmental concern. The legal requirements concerning discharge of contaminated waste water are reinforced in many countries and the discharge fees are increasing. According to our experience large international clothes companies are setting a new standard of requirements, often higher than the local legislation requires.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Chromatography laboratory instrumentation for academia

    Education and research count on intuitive, flexible and expandable laboratory equipment. BUCHI possesses elaborated solutions for various steps in academic laboratories covering a wide range of applications.

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you