Applications available in Maldives
-
Premium
Gas detection in industrial gases
Industrial gases include all companies which manufacture atmospheric Gases, specific gases, semi-conductor gases and supply them to end users in different ways: on-site, cylinders, tanks to be used in lot of industrial manufacturing ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Ozone Generator for Cooling Tower
The treatment of cooling towers with ozone is not only good for the environment but also good for the bottom line. Ozone, a powerful biocide and oxidant , affords several advantages over the traditional chemical treatment of cooling towers, ...
By Chemtronics Technologies (India) Pvt. Ltd. based in Mumbai, INDIA.
-
Premium
Gas monitoring instruments and systems for stack testing according to EPA test method 320
The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers for U.H.P. industry
Air Liquide, Praxair, Air Products, BOC, Messer, Linde, Takachiho, Aga, etc. need to control the amount of impurities before delivery to customer in petrochemical or chemical ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Refineries and hazardous areas gas analyzers for industrial air monitoring
Chromatotec can propose for hazardous areas (for instance refineries) specific boxes for our analysers : category 1 IIc T4 for ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Weather Monitoring for the Air and Climate Industry
OWI-430 DSP-WIVISTM Present Weather and Visibility Sensor Combines present weather identification, precipitation measurement and visibility into a single rugged package. • Outstanding performance yet low cost • DSP based – no field calibration required • Advanced scintillation technology • Intelligent algorithms based on over 800 million hours of OSi sensor field data • Rugged design – field proven from tropical to sub-arctic environments • Easy Installation and integration • Long-term reliability – designed for ...
By Optical Scientific Inc. (OSi) based in Gaithersburg, MARYLAND (USA).
-
Premium
Mercury monitoring for measuring mercury speciation in air
Tekran offers the only completely integrated, automated system for measuring mercury speciation in air. The Tekran 2537, when coupled to the Model 1130 and Model 1135 provides a continuous record of gaseous elemental mercury, gaseous oxidized mercury and particle-bound mercury. Over the past 12 years, the Tekran 2537-1130-1135 system has been the most significant tool used to advance the understanding of the fate and transport of atmospheric mercury. See the Expert’s Corner for details about international ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Blowers, compressors and gas meters for process gas technology
The differences in compressor technologies can be found right where thedemanding applicationsare. Where often highly critical processes gases and coolants are compressed. In thechemical, petrochemical, energy, food, or pharmaceutical industries.The demands on plant design, engineering, documentation and worldwide service in those industries are often just as high as thesafety and environmental guidelinesto be ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Gas monitoring instruments and systems for process NOx measurement
Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Environmental Data Monitoring Solutions for Controlled Atmosphere
To reduce the introduction, generation and retention of particles in cleanrooms, particle concentration controls are set ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Blowers, compressors and gas meters for vacuum technology
Whether in foodstuff or pharmaceutical industry, in the chemistry or process engineering, metall processing or in automotive industry: in many branches of industry most different manufacturing processes require gas conditions with a pressure considerably below atmospheric pressure. A pressure of -700 mbar (300 mbar abs.) is considered as negative pressure. Below 300 mbar absolute the vacuum range begins, subdivided in rough, fine, high and ultra high ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Gas analyzers and monitoring systems for carbon capture & storage (CCS)
Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Thermoformed plastic solutions for cooling tower sector
Brentwood engineers reliable cooling tower components, including film fill media and drift eliminators, designed to provide long-lasting performance in industrial and commercial applications. Expertly engineered cooling tower components and solutions built on a foundation of comprehensive polymer knowledge, diverse worldwide manufacturing, and superior customer ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
By ENVEA based in Poissy, FRANCE.
-
Premium
Gas monitoring instruments and systems for engine emissions measurements
The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Emission control solutions for clinker cooler and pre-heater dedusting sector
The control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler, is usually a problem for cement plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Raw-gas monitoring for scrubber optimizing
The consumption of scrubbing material in a scrubber is related to the mass flow of acid gases. Hydrogen chloride (HCl) and sulphur dioxide (SO2) are the major acid gases in an incinerator. By measuring the mass flow of SO2 and HCl in the raw gas going into the scrubber, it is possible to calculate the required quantity of scrubbing ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Air pollution control for ventilation air methane industry
Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Compressed-air technology
You are looking for a compressed-air station which is specially optimized for your case of application? In addition to customised product solutions, AERZEN supports you within the entire development cycle, from the conception to the implementation and commissioning of your compressed air ...
By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.
-
Premium
Mercury monitoring for manual analysis of air traps
The Tekran 2600 versatility is evident with the economical and convenient configuration for manual analysis of air samples collected on gold cartridges. Converting the instrument allows calibration by simple injection of gaseous Hg using the Tekran 2505. Once analyzed, the gold cartridges are immediately ready for ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you