Applications available in Malta
-
Premium
Corrosion-resistant materials for the power industry
Sauereisen is the most widely known international company to supply corrosion-resistant coatings, mortars and gunitable refractory linings for flue gas applications in the power industry. For more than half a century, our cost-effective corrosion-resistant materials have provided solutions for power plants and their various components where the infrastructure would otherwise be threatened by corrosion. Our diverse product line includes potassium silicate, novolac epoxy, vinyl ester and urethane formulations ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Air pollution control for the energy & heat recovery industry
Protect Your Profit Margins. Anguil’s Engineering expertise and flexible solutions ensure payback and optimized performance so your plant can reduce operating costs and greenhouse gas ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Premium
Cement materials for Resistors industry
Resistors | Wire Wound / “Boat” or “Bathtub” / Rheostat; Coating, potting, and/or encapsulation. Seals resistance wire placed in or upon ceramic base. Specified for electrical ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Visual inspection solutions for the borescopes for turbine and turbine components inspection
Turbines and generators are important pieces of machinery that need to be properly maintained and repaired to ensure maximum service life and safety. Non destructive remote visual inspection of turbines with a video borescope is a cost effective and efficient way to inspect without having to disassemble a turbine. Steam and gas turbines run at extremely high pressures, and they need to be kept in good mechanical shape to efficiently do their jobs. Not only is efficiency a concern, no one wants to learn there is a ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Gas analyzers and monitoring systems for Power plants
Power plants are industrial facilities used to generate electric power with the help of one or more generators which convert different energy sources into electric power. Power plants need to monitor emissions continuously according to local emission regulations. Read about our solutions for the power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Mineral-based technologies solutions for the specialized carbon solutions industry
Technological Leader in the Production of Engineered Carbon Based Products. The Pyrogenics Group is the technological leader in the production of engineered carbon based products for key industries requiring innovative material ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Water treatment chemicals for power plants industry
Today’s power industry is already subject to strict official regulations. These rules will only become more stringent in the future. As a result, environmentally friendly, cost-effective solutions that ensure plant and operational safety are in high ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Cement materials for Heating elements industry
Heating Elements | Coils / Cartridge Heaters / Sheath; Thermally conductive cement. Enables transmission or dissipation of heat. Secures element and maintains assembly. High temperature resistance and electrical ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Emission control solutions for calcination and mineral processing sector
Calcination is a process that involves heating a substance, typically a solid material, at high temperature with limited supply of air or oxygen. The purpose of calcination is to remove volatile components and drive off impurities or to transform the material into a more desirable form for further ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Hand-Held & Process Control Water Testing Instrument for Boilers and Cooling Towers
Boilers and cooling towers share two major water related problems: deposits and corrosion. As steam is generated by a boiler or water evaporating from a cooling tower, dissolved minerals are left behind, increasing the concentration of these minerals. Additional minerals are introduced via the water added to makeup the water lost to steam/evaporation. Eventually, the minerals reach a level (or cycle) of concentration that will cause either loss of efficiency due to scale or damage from corrosion. This level can be ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Water and Wastewater Treatment Systems for Energy
It is predicted that the global electricity demand will double in the next 20 years. A large amount of water is consumed in electricity production and it is estimated that the amount of water to be used in these 20 years, when the electricity demand will increase, will be 3 times more. Due to the limited water resources in the world, it may cause great limitations in the progress and profitability of the sector. Today, with the increasing population, energy consumption has also increased. The energy sector is an ...
By Zetaş Kimya based in Ostim OSB/Yenimahalle, TURKEY.
-
Premium
Emissions testing for engines
Rich-burn engine exhaust, when uncontrolled, can have wide concentration ranges and both CO and NOX can fluctuate significantly. The on-board CO dilution system will automatically set-up for optimum testing, perfect for a rich burn engine. Lean-burn engines have different exhaust characteristics, but NO2 can make up a significant portion of the total NOX measurement. The 350 measures both NO and NO2 for proper lean-burn engine set-up. Due to high concentration, replaceable interference filters keep the sensors ...
By Testo, Inc. based in West Chester, PENNSYLVANIA (USA).
-
Premium
pH value and conductivity measurement for power plants
Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable energy ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Cement materials for Thermocouples industry
Thermocouples | Samplers / Sensors / Tips / Tube; Potting application of quartz into ceramic body requiring high thermal properties. Adhesive application to affix thermal insulating tape to cardboard. Coating application for sampling ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Emission control solutions for high temperature separation processes sector
Separating particles from the air at high temperature serves multiple needs that go from thermal energy recovery in several industries to improving the economics of power and incineration ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Carbon technology solutions for semiconductor sector
Global semiconductor manufacturers use ion implantation in most of their chip production processes. Ion implantation uses two or three closely spaced multiple-aperture electrodes to extract ions from a source and eject them in a collimated beam. The electrodes are called "grids" because they are perforated with a large number of small holes in a regular array under close ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Continuous emissions monitoring solutions for power plants
OPSIS offers fully automated system solutions for continuous monitoring in power plants. The monitoring systems have been tested and approved by the German TÜV and the U.S. EPA among others, for the best performance and longest calibration ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Emissions testing for industrial boilers and burners
Industrial boilers and burners have their own unique characteristics. When an unexpectedly high CO is detected, the Testo 350 will automatically adjust to the situation, keeping the sensor protected at all times. Don't worry about climbing and removing the probe from the stack, just hit the fresh air button. The measurements of O2, CO, NO and SO2, combined with automatic calculations (CO2, efficiency, excess air), provide fast tuning solutions. The 350's compact design is better for working on a platform or small ...
By Testo, Inc. based in West Chester, PENNSYLVANIA (USA).
-
Premium
Water treatment solutions for energy industry
Water treatment solutions for energy ...
By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).
-
Premium
Water and wastewater treatment solutions for power generation sector
No energy without the engineering and excellence of Enexio. The overall efficiency of thermal power generation (called “Carnot cycle”) inherently depends on the „cold-end” of the cycle, where the waste heat is dissipated by the heat sink: The cooling system of the power plant. This actually is the part of a power plant where ENEXIO supports its customers and partners with its rich product portfolio ranges from all dry air cooled condensers (ACC) and Heller Technologies to all wet cooling ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you