Applications available in Mexico

  • Premium

    Recycling Systems for the municipal solid waste processing sector

    MACPRESSE products revolutionized the way the solid waste is transferred and processed.Used in different environments, our machines innovate and optimize the traditional process of waste disposal. In fact, different materials such as municpal solid waste is treated and compacted before transferring them from the transfer stations to landfill sites. This way, there’s no risk of land contamination and bad-smelling liquid formation – attracting vermin –when waste is not pre-treated ,collected in transfer stations and delivered to landfill sites.

    By Macpresse Europa S.R.L based in Vernate, ITALY.

  • Premium

    Eliminating the Environmental foot print for Offshore and On shore oil rigs

    OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

    By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

  • Premium

    Industrial evaporation of the chemical industry

    In the chemical industry a wide range of applications can be performed with an industrial evaporator

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Laboratory evaporation for pharmaceutical laboratories

    BUCHI offers a variety of reliable solutions for regulated pharmaceutical laboratories

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Site investigation for horizontal drilling

    Site investigation for horizontal drilling.

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Site investigation for tunneling operation

    Site investigation for tunneling operation

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Fracture and cavity detection in bedrock

    Fracture and cavity detection in bedrock.

    By Advanced Geosciences, Inc. based in Austin, TEXAS (USA).

  • Premium

    Methane gas leak detection

    Methane emissions from oil and natural gas systems is primarily the result of normal operations or system disruptions. These hazardous emissions can be cost-effectively reduced by upgrading technologies or equipment, and by improving operations. However, in order to do so, one must be able to detect and identify the existence of a fugitive gas leak. Opgal`s EyeC Gas Thermal Imager for gas leak detection, is one of the most advanced cameras used to detect leaks. Thus, it becomes a required tool in mitigating and reducing fugitive emissions of methane gas.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    VOCs Fugitive emissions detection

    An oil refinery or petroleum refinery is an industrial process plant where crude oil is processed and refined into more useful petroleum products, such as naphtha, gasoline, diesel fuel, asphalt base, heating oil, kerosene, etc,. Oil refineries are typically large, sprawling industrial complexes with extensive piping running throughout, carrying streams of fluids between large chemical processing units. The refining process releases a number of different chemicals into the atmosphere mostly Hydrocarbons which cause severe health and safety hazards. Opgal`s EyeCGas Thermal Imager can detect the leaking gases from a distance and help reducing the threats

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Premium

    Television recycling

    By ATN Engineering B.V. based in Stadskanaal, NETHERLANDS.

  • Premium

    Laboratory Analytical - Density Concentration Tables

    With predefined formulas or concentration tables the density meter converts the measured density value automatically into the desired concentration unit. The density meters from Mettler Toledo have already built in formulas and concentration tables for the most common applications.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Pipette Calibration

    To ensure data integrity regular pipette performance testing and pipette calibration are fundamental to monitor the accuracy of your pipettes. Testing pipette performance with a balance plays a critical part in this testing approach. METTLER TOLEDO offers solutions for occasional performance testing up to professional pipette calibration according to ISO8655. We can support you in finding the right mix between self made pipette calibration and professional service support tailored to your needs.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Laboratory Weighing - Interval Weighing

    Simply connect one or multiple balances to the LabX balance PC software, define duration and frequency of your measurements and LabX takes care of automatic data collection. All weighings can be activated from the balance touch screen, executed according to your SOP and recorded automatically. LabX captures all data and stores it in a central SQL-database. From you office, you gain access to all data immediately and enjoy powerful data management functionalities. Data can also be exported manually or automatically to any destination, e.g. to a validated MS Excel spreadsheet or an application software.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Particle and Droplet Processing

    Optimize Multiphase Processes With In Situ Video and Real-Time Particle and Droplet Measurements. Particles and droplets are everywhere in the chemical, consumer products, pulp and paper, and petroleum industries. Particles grow, agglomerate, break, dissolve, and change shape - all of which can have an impact on process performance and product quality. To be successful, chemists and engineers must understand and optimize particle size distributions to control process efficiency such as stability, separations, or flow properties. In addition, particle and emulsion distributions must be well controlled to ensure repeatable product yield, shelf life, and bulk density.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Process Analytical Technology (PAT)/Quality by Design (QbD)

    Process Analytical Technology (PAT) has been implemented for years, particularly by the chemical industry for the control of chemical processes. More recently, PAT has become a cornerstone of the US Food and Drug Administration’s (US FDA) Quality by Design (QbD) initiative for both the design and control of quality processes. For this reason, the pharmaceutical industry is also active in utilizing PAT tools. PAT tools can be implemented in both the lab and the plant, with laboratory PAT focused more on the design of a quality process and with plant PAT focused on the monitoring and control of the process.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    AutoChem - Formulations and Product Development

    The particle size distribution is one of the most critical parameters in drug product quality. Real time understanding and control of particles ensures Quality by Design (QbD) in solid and liquid dosage formulation. FBRM and PVM Process Analytical Technologies (PAT) provide in-process real time measurements of particle dimension, particle shape, and particle count. FBRM and PVM are used to promote faster formulation development, improve process confidence, and control batch-to-batch consistency.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you