Applications available in Morocco

  • Premium

    Process cooling and industrial comfort applications solutions for air conditioning industry

    The wide range of products is able to satisfy all the comfort needs for light and commercial applications, Airports and Stations, Data Center, Hotels, Hospitals, Shopping Centers and many other applications. HITEMA provides innovative solutions with high energy saving performances, new natural refrigerants, high technology unit design and components as Danfoss TurboCor oil free compressors.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Carbon capture and storage (CCS) applications

    Carbon Capture and Storage (CCS) is an emerging method of reducing greenhouse gas (GHG) emissions of power plants. In a process called ‘scrubbing’, the carbon dioxide emissions can be absorbed into chemical solvents consisting of amines or carbonates. Scrubbing is a well-established method of carbon capture, with virtually every commercial CO2 capture plant in operation using this process. In the process, the first step is the removal of impurities from the flue gas, such as hydrocarbons and oxides of...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Carbon dioxide mass flow meters flow solutions

    Thermal mass flowmeters are ideal for Carbon Dioxide metering and mass flow control. Sierra specializes in accurate mass flow measurement and/or control of CO2 gas. Applications range from general industrial process control across numerous industries to Green House Gas monitoring requirements and general research.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flare gas measurement flow meter applications

    Oil wells almost always produce natural gas (“associated gas”) along with the petroleum. In many cases, it is uneconomical to process due to heavy contamination. As a consequence, this gas is combusted, “flared” or simply vented as-is during upset conditions in the process. Newly updated EPA regulations like 40 CFR Part 60 Subpart OOOO (also known as Quad O) as well as the new RSR MACT rule for refineries, requires oil & gas companies to report the flare gas emitted to our atmosphere....

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Facilities management in line air flow meter solutions

    Sierra’s offers a complete line of precision flow solutions for any gas, liquid or steam measurement to improve energy efficiency in all facilities management applications. Our mass vortex meters are used to allocate steam, our in line thermal mass flow meters track and allocate natural gas and compressed air usage, and our clamp-on and insertion ultrasonic meters provide accurate water and water-based fluid measurement.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas monitoring instruments and systems for greenhouse gas emissions from soil

    Measurement of greenhouse gases released from soil and water surface forms an important part of climate change study. Microbial activity in the soil or for instance the melting of permafrost releases greenhouse gases such as Methane and nitrous oxide N2O into the atmosphere. Measurement of the concentration for these gases inside an open-bottom soil chamber placed on the soil over time tells the emission rate (flux) per chamber footprint area.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for stack testing

    Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for stack testing according to EPA test method 320

    The United States Environmental Protection Agency (EPA) has two stack testing methods for FTIR gas analyzers. Method 320 is an FTIR method for measuring wide range of organic and inorganic pollutants. Method 321 is a specific version for measuring hydrogen chloride HCl at cement kilns producing Portland cement. These methods define a quality assurance and control processes for verifying the accuracy of the results. The requirements for analytical equipment and software are defined on 40 CFR Part 60 Appendix B...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Gas monitoring instruments and systems for engine emissions measurements

    The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Direct determination of mercury content in ambient air

    Introduction Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Flow meters for steam measurement solutions

    As an innovative steam flow meter manufacturer, Sierra’s InnovaMass brand was the first multivariable mass vortex flow meter to launch to market in the late 1990s. Today our flow meter steam technology is successfully used across numerous applications. Sierra`s multivariable product line features an in-line version, the InnovaMass 240 vortex flow meter; a unique immersible version, the InnovaMass 241; and the InnovaMass cryogenic version.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas and vacuum solutions for compressed-air technology

    You are looking for a compressed-air station which is specially optimized for your case of application? Beside of innovative and customized product solutions we offer with our compressed-air specialist AERZEN SYSTEMS a competent partner supporting you in the whole development cycle from conception up to realization and commissioning of your compressed-air station. The quality of the used materials is decisive. Therefore for the compressed-air production the proven AERZEN screw compressors are used.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Compressed air, gas and vacuum solutions for pneumatic transport for bulk material handling

    Pneumatic transport of bulk materials, quickly, gently, and with minimal energy expenditure – a job for real specialists. Oil-free rotary lobe hybrid blowers, rotary lobe compressors and screw compressors from AERZEN can handle any kind of transport need. With unparalleled efficiency and reliability.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Compressed air & gas solutions for vacuum technology

    Whether in foodstuff or pharmaceutical industry, in the chemistry or process engineering, metall processing or in automotive industry: in many branches of industry most different manufacturing processes require gas conditions with a pressure considerably below atmospheric pressure. A pressure of -700 mbar (300 mbar abs.) is considered as negative pressure. Below 300 mbar absolute the vacuum range begins, subdivided in rough, fine, high and ultra high vacuum.

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Compressed air, gas and vacuum solutions for process gas and coolant industry

    The differences in compressor technologies can be found right where the demanding applications are. Where often highly critical processes gases and coolants are compressed. In the chemical, petrochemical, energy, food, or pharmaceutical industries. The demands on plant design, engineering, documentation and worldwide service in those industries are often just as high as the safety and environmental guidelines to be followed. For over 150 years, AERZEN has been developing a unique expertise for these industries....

    By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY.

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Gas monitoring instruments and systems for process NOx measurement

    Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen...

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you