Applications available in Netherlands

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Circuit Board Cleanliness Testing

    Contamination of circuit boards can bring about severe degradation of insulation resistance and dielectric strength. Cleanliness of completed circuit boards is, therefore, of vital interest. For those companies who have established circuit board cleaning procedures, the MIL Spec P-28809 has been used as a guideline for control. Now a simple `on line` test for the relative measurement of ionic contamination has been developed. This fast and economical method for testing circuit board cleanliness uses a Myron L...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Electrochemical solutions and water technologies for electronics

    We are committed to providing mixed metal oxide (MMO)-coated anodes and electrochemical technologies for the electronics industry. Listening to the industrial needs and main drivers, we have developed a high quality and reliable MMO-coated titanium anode for the electrodeposition of copper, gold and other metals on printed circuit boards (PCB) in replacement of soluble anodes.

  • Premium

    Waste Sorting - CRT Glass Sorting

    End of life TV sets and computer monitors require to be recycled to maximise the level of material recovery, and to meet the requirements of the EU WEEE Directive. CRT glass is the largest item by weight. However, because of the 2 different types of glass used in CRT manufacture, the glass fractions have to be sorted to achieve a separation of the 2 type of glass, i.e. panel glass sorted from funnel glass. X-TRACT separator is able to sort the panel glass from the funnel glass. It does it by comparing their...

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Intelligent compliance solutions for electronics and medical devices

    Few industries face the mounting challenges and scrutiny of expanding environmental compliance requirements, ecological mandates, consumer expectations and NGO watch groups as much as electronics and medical device manufacturers. Even before the Sony PlayStation cadmium crisis, the entire supply chain has been inundated by an ever-expanding myriad of legislation, ranging from the EU Directives on waste electrical and electronic equipment (WEEE), the restriction of hazardous substances (

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    RoHS analysis in electronic equipment

    The RoHS directive stipulates maximum limits for various hazardous substances in electrical and electronic equipment. Meeting the RoHS Directive requires reliable equipment and methods. As a leading manufacturer of precision instruments for chemical analysis, we are aware of these challenges.  For this reason, Metrohm offers you not only the most advanced equipment, but rather complete solutions for the particular tasks at hand.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Recycling equipment for shredding electronic scrap (E-scrap)

    Processing electronic scrap (E-Scrap or WEEE) presents special challenges. Computers, consumer electronics, and IT equipment need to be destroyed to extract recyclables or ensure the security and complete destruction of the product. Hard drives, tapes and data storage devices must be completely destroyed to provide data security. And, while many electronic scrap items do not require the specific size reduction that hard drives or other data storage devices require, all electronic scrap includes recoverable...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Advanced water purification technologies for semiconductor and electronics sector

    High-technology industries use ultrapure water in their manufacturing. SnowPure`s components help sell pure water systems to semiconductor, electronics, solar panel, hard disk drive, glass lens, and flat panel display industries. These industries often require “ppt” (part-per-trillion) level impurities. EDI and UV-TOC are key technologies in these systems.

    By SnowPure Water Technologies based in San Clemente, CALIFORNIA (USA).

  • Premium

    Water treatment chemicals solutions for electronics industry

    In the electronics industry, pure water and ultrapure water with a very high degree of purity and functional water that dissolve gases into ultrapure water are used to clean silicon wafers and electronic components. Kurita Water Industries offers a range of products such as deionizers and ultrapure water deionizers that combine RO (reverse osmosis) membrane water treatment chemicals, ion-exchange resins, and continuously regenerating-type deionizers , etc., as well as functional water production systems ....

    By Kurita based in Tokyo, JAPAN.

  • Premium

    Chemiluminescense based analyzer for semiconductor applications

    NOx detection is an innovative approach in CMP (Chemical Mechanical Polishing) process control. CMP smoothens the wafer surface with a combined chemical and mechanical polishing procedure. During production, wafers are coated by a thin layer. To avoid damage to the wafer surface, for instance by stress cracks, the NOx emitted as soon as the wafer is plane and blank must be measured. Therefore, a high-resolution NOx-detector, capable of determining exactly when the polishing process must be stopped, is essential....

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Recycling sorting solutions for the electronic scrap sorting - weee

    The growing demand for high-value, secondary raw materials makes targeted recycling increasingly attractive. In the EU alone, experts estimated over 8 million tons of disused electrical equipment in 2010. TOMRA Sorting’s goal is to utilize electronic scrap sorting to sort out pollutants as well as high-purity components.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Metals separation equipment for cleaning metal pollutants from WEEE

    REGULATOR-CETRISA, as manufacturer of metals separation equipment, offers different solutions for cleaning metal pollutants from. Before the E-Waste enter into the shredding process, any contaminating material, like batteries, color cartridges, tonners, etc., must be removed manually from the incoming devices.

    By Regulator-Cetrisa based in Gava, SPAIN.

  • Premium

    Air pollution control for microelectronics

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Premium

    Specialty Cleaners and Lubricants for Electronics Industry

    Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items.  They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals.  When rinsed properly our products leave absolutely no residue.  They are also proven in removing soils from filter membranes used in wastewater treatment systems.

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Resin technology solutions for the semiconductor - electronics sector

    Purolite ion exchange resins for ultrapure water are specially manufactured to meet the precise needs of the electronics industry for wafer and microchip production.  These needs require the highest possible water quality (less than 1 ppb Total Organic Carbon (TOC) and greater than 18.2 MΩ·cm resistivity, with minimum rinse times), while eliminating contamination of the high purity circuits when ion exchange resin is first installed.

    By Purolite Corporation based in Bala Cynwyd, PENNSYLVANIA (USA).

  • Premium

    EDXRF spectrometers for electronics (RoHS / WEEE) industry

    Compliance with the RoHS and WEEE directives

    The Energy Dispersive X-ray Fluorescence (ED-XRF) spectrometers offer efficient solutions for the analytical requirements of the determination of regulated substances in electrical and electronic equipment according to the European Directive RoHS (Restriction of Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment).

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Premium

    Industrial air pollution control for the electronics and electrical industry

    The world`s appetite for electronic devices - from simple household appliances to sophisticated computers - has led to rapid growth of both these industries. Typically for the electronics industry, there are large waste gas streams (up to 400,000 Nm³/h) with relatively low concentrations of different solvents. The waste gases mainly occur in coating, cleaning and etching processes during the production of semiconductors, CDs/DVDs, Blue-ray discs,...

  • Premium

    Strategic market research solutions for cabling & broadband industry

    PennWell`s Cabling & Broadband Group is the trusted resource engineers and engineering managers turn to for up-to-date information focused on the structured cabling, optical communications and broadband industry. Featuring leading industry publications, websites, eNewsletters, events and more, industry leaders rely on Cabling Installation & Maintenance, Lightwave and Broadband Technology Report to provide key details and insights on these rapidly evolving industries.

    By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

  • Premium

    Water treatment solutions for the micro-electronics industry

    Micro-electronics industry is probably the fastest growing industry driven mainly by the expansion of the computer and telecommunications markets, as well as the growing automotive, military and industrial electronic markets. The production of smaller and smaller microelectronic components is contributing for a great pressure for the purification of process waters, given the extreme high quality water demanded by the manufacturers Lenntech provides complete solutions for ultra pure water production for semi-cond...

    By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you