Applications available in Netherlands

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Ozone Water Treatment for Activated Sludge Process Plants

    Ozone breaks up filaments and improves settling characteristics of the sludge... Filamentous sludge is a common problem at activated sludge plants. With ozonation of the return sludge flow it is possible to reduced the amount of filamentous bacteria in the sludge and significantly increased the settling properties of the sludge.This in turn means better performance of the activated sludge process. When a bioreactor is connected to the sludge line the removal of the damaging filamentous bacteria means higher...

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Odor control for remediation

    Helping others clean up the earth by clearing up brownfield remediation odors. Helping others clean up the earth by clearing up brownfield remediation odors. Brownfield remediation consists of removing large amounts of soil that have been saturated with tar, oil or other contaminating substances. Not only dangerous to handle, the disturbed soil is often infused with very unpleasant and in some cases potentially nauseous odors.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Improved Reproducibility and Reduced Sample Preparation Time for the HPLC Analysis of Aflatoxins in Raw Peanut Paste

    The US FDA and international regulatory agencies have set contamination levels for aflatoxins in animal feedstuffs. Since Aspergillus may infect commodities pre-harvest, during storage or during processing, monitoring for aflatoxins in associated agricultural commodities at all stages of production is requisite. Field screening methods exist that are adequate to estimate contamination levels for aflatoxins. When additional confirmation or quantification is desired, chromatographic laboratory analysis is often...

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Environmental solutions for the iron and steel industry

    The evaporative gas cooling and conditioning system uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, it helps electrostatic precipitators because the water spray completely evaporates while cooling the gases. There is no free water and no...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the refining and petrochemical industry

    Refining and Petrochemical Safety, Reliability and Environmental Sustainability.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the composites & carbon fiber industry

    Dürr MEGTEC provides roll-to-roll drying, curing and thermal air handling systems for coating and laminating applications. Whether you need a small, value-priced roll support dryer, a custom-configured air flotation dryer or a complete coating line for a specialized application, Dürr MEGTEC has the products and services to meet your requirements. Our technical application and design engineers work with your process specialists or OEM suppliers to design systems that will provide reliable, high...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the flue gas temperature control

    Evaporative gas cooling and conditioning systems help protect your downstream equipment, enhance air pollution control performance, reduce gas volumes, and increase production capacity. Central to our systems are Turbotak atomizing nozzles, which introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates, while absorbing heat from the gases, for free-flowing dust, zero liquid discharge, and minimal or no wall buildup.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the metals and mining industry

    Dürr MEGTEC provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry, including aluminum, copper, nickel, zinc, and precious metals producers. Our evaporative gas cooling and conditioning system controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies without wetting problems.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Environmental solutions for the pulp and paper industry

    Environmental solutions for the pulp and paper industry.

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Odor control for liquid waste

    Vaporize Odors Associated With Liquid Waste Processing: Liquid waste, such as fats, oils and grease (F.O.G.) can emit unpleasant odors, which become even more pronounced in various stages of processing. Malodorous F.O.G. from restaurants are often transported by truck to F.O.G. filtering facilities and then to plants where they are processed into useable byproducts.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Ozone Water Treatment for Textile Wastewater Treatment Industry

    Wastewater that is discharged by dye manufacturing and textile finishing industries has become an environmental concern. The legal requirements concerning discharge of contaminated waste water are reinforced in many countries and the discharge fees are increasing. According to our experience large international clothes companies are setting a new standard of requirements, often higher than the local legislation requires.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    AutoChem - Process Safety

    Detect Thermal Hazards Early and Design Safety Into The Chemical Process. We must ask ourselves: How much heat will be generated under normal conditions? How will a change in condition, controlled or uncontrolled, change the rate of heat generation? Can our process equipment handle removing the heated generated? Answering these questions with speed and accuracy is necessary to ensure safe and efficient design and scale-up of synthesis reactions.

    By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.

  • Premium

    Ozone Water Treatment for Soil and Groundwater Remediation Industry

    Man-made perfluorinated compounds, like PFOS/PFOA, are an increasing threat to our waters and the environment.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Ozone Water Treatment for Pharmaceutical Residue Industry

    About a decade ago it became known that pharmaceutical residue in river water had caused fish to change sex. Recent studies show that pharmaceutical residue alters behavior of perch. Many studies have concluded that waste waster contains micro pollutants like pharmaceutical residue. This water is released from our waste water treatment plants into the environment without proper treatment. Many countries in Europe are now taking political action to reduce the effects of the pharmaceutical residue. In Switzerland,...

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Fountain Solutions

    Accurate fountain (dampening) solution concentration control is essential for consistent, high-quality results in lithography. Low concentration can cause drying on the non-image area of the plate resulting in tinting, scumming, blanket piling, etc. High concentrations, on the other hand, bring about over-emulsification of the ink. This results in weakening of color strength and changes in ink rheology (body and flow properties). Correct concentration will allow the non-image areas of the plate to be appropriate...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Test Kits and Photometric Methods for agriculture, in food or water analysis

    When analyzing water and food, trust plays a very important role. Only careful analysis using tests that are performed correctly and are delivering sound results will help to maintain and improve our quality of life. With ready-to-use tests and test systems from Merck Millipore, you can trust your results. Our broad product range covers everything from water analysis to the control of production process up to the measurement of special food parameters.

    By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY.

  • Premium

    Hazardous waste treatment solutions for chlorine industry

    The mercury cell process is a formerly widely-used production technique for the production of chlorine and caustic soda. The liquid metal, mercury, acts as cathode (negative pole) in this process. In the past, the loss of mercury during the process (to air, soil and water) led to serious health and environmental problems. Therefore, most European chlorine producers have decided to phase out the mercury cell process by 2020. Nevertheless, even today, almost 6000 tons of mercury is used per year for chlorine...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Water monitoring technology for urban hydrology

    Urban Hydrology deals with the specific aspects of the hydrological cycle in urban and industrial settings. This includes all natural water flows as well as the consideration of precipitation, storm water, groundwater, rivers, and lakes, but also the infrastructure and systems for water supply and sanitation in a city.

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you