Applications available in Nicaragua
-
Premium
Visual inspection solutions for automotive industry
In the automotive field, borescopes used for remote visual inspection, make it possible to investigate a variety of problems without tearing apart the entire engine block. This allows you to inspect the internal components of the engine for carbon deposits, wear and tear, to pinpoint sources of unwanted noise, identify corrosion and confirm component failure. Routine quality control inspections at the production stage should also occur frequently. Sites include fuel injector nozzles, cast cylinder heads and ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Gas detection in the transportation industry
The manufacture and use of motor vehicles is always associated with gas and fire hazards and other risks. This applies to the production facilities in which individual components are manufactured or the vehicles are assembled, as well as tunnels and parking garages in which exhaust gases can accumulate. The type of gas hazard differs in the areas of application, but the goal to be achieved remains the same everywhere - the safety of people and the infrastructure. With its wide range of gas monitoring products, ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Gas analyzers for automotive industry
airmOzone PAMS (30 or 58 compounds) CH4-NMTHC or UHC-CH4-C2H6 Case Study airmOzone ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Chemiluminescense based analyzer for automotive, aviation, marine, and combustive engines sector
Focuses on high NOx, NOx-related and multigas-concentrations up to 10’000 ppm. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. The applications are characterized by demanding sample gas conditions, such as in automotive, aviation, naval, or combustive engine emissions, as well as in catalyst production. ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Mineral-based technologies solutions for the automotive & commercial vehicle industry
High Value-Add Products for Automotive & Commercial Vehicles. MTI provides a variety of high-value products used in the automotive and commercial vehicle ...
By CETCO based in New York, NEW YORK (USA).
-
Premium
Compressed air and industrial gases solutions for automotive industry
Energy savings solutions in the automotive industry. Compressed air consumption is vital in the car industry. Measuring and monitoring of your compressed air and other utilities will lead to significant system improvements and energy savings. With the introduction of compressed air, the automotive industry has been significantly improved in terms of workers’ safety and overall plant efficiency. Nowadays you will find compressed air in almost all aspects of the car manufacturing process, like vehicle ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Recycling equipments for automobile Crushers
Automobile Crushers, Loggers, & Balers featuring MAC crushers, loggers, and balers, leading the industry for nearly 50 ...
By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).
-
Premium
Erosion and dust control solutions for heavy haul road stabilizer sector
Used on heavy haul roads, Envirotac prevents dust, wear, and erosion. Further, it helps saving water, preventing equipment damage due to dust, preventing loss of tire tread due to road wear and reducing emissions from equipment that would normally be used to maintain the ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Emissions Monitoring for Tunnels
The Opsis monitoring solution is designed for high-quality gas measurement in traffic tunnels. The monitoring systems have been approved by the Germany TÜV and the U.S. EPA among ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Erosion and dust control solutions for transportation sector
Envirotac line of polymers have been used to construct roads around the world. Our polymers cross link the soils at a nano level creating a tough durable surface that will stand up to Heavy Haul trucks and the daily grind of vehicular traffic. If you are using Chlorides, Lignin's, or Enzymes, make the switch to a superior road stabilizing ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Oil Water Separators for Transportation
Vehicle Maintenance, Vehicle and Equipment Washing, Stormwater Runoff and Spill ...
By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).
-
Premium
Measurements Solutions for Automotive
The automotive industry is dependent on the adoption of advanced manufacturing technologies to enable the production of high quality, precision components that are crucial to ensuring performance. The global push for higher efficiency standards, tighter emission controls and a reduction in the allowable cabin noise have prompted a shift to smoother surfaces and complementary metrology methods. The industry is also witnessing the transition from off-line quality control inspection to on-line or in-line ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Air pollution control for the automotive manufacturing industry
Anguil’s Engineering expertise and flexible solutions guarantee compliance and optimized performance so your automotive plant can focus on production and avoid supply chain ...
By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).
-
Transport & Logistics - Shipping and Manifesting
As a warehouse, shipper or logistics firm, you want to make sure that you can allocate the correct freight costs to each shipment. Not only does this improve profitability but also your visibility of freight costs. METTLER TOLEDO is the preferred supplier of many of the major transport firms worldwide. By using the same equipment as they do, for automatic collection of dimensions, weight and ID, you can speed up your manifesting process and effectively manage shipping logistics and ...
By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.
-
Assembly lubricants for Bus industry
The bus transportation industry relies heavily on natural and synthetic rubber for various purposes including chassis, engine and suspension components. Additional rubber assembly applications include mounts, seals, belts, bushings, O-rings, grommets, insulators, tires, wire harnesses, hoses, and other powertrain components and subsystem assemblies. Due to the slip resistant nature of rubber, it is relatively difficult to install, remove or manipulate. P-80® Lubricants provide a safe and easy way to improve ...
By International Products Corporation based in Burlington, NEW JERSEY (USA).
-
Spill containment for tanker trucks/ refuelers
The SafeGuards line of spill containments include a number of products that are specifically designed for tanker truck full secondary containment. From transloading concerns; staged tankers to dropped tanker applications we have the most user friendly drive through containments in the industry. Portable to permanent we can solve your problem! We can help you with your SPCC loading rack compliance plan with our 2G Environmental Professional Engineering (PE) affiliated ...
By Millennium Enterprises, Inc. (MEI) based in Marietta, GEORGIA (US) (USA).
-
Process cooling and industrial comfort applications solutions for automotive industry
The production of a vehicle is complicated and includes lots of processes (cooling of machine tools, painting baths, cooling of mechanical and hydraulic components, molding machines etc..) with different kind of heat transfer, each with different range of temperatures ...
By HITEMA INTERNATIONAL S.R.L. based in Bovolenta Padua, ITALY.
-
Machines and plants for automobile shredder residue (ASR) carfluff
By Promeco SpA based in Fino Mornasco (CO), ITALY.
-
Industrial fluid separation solutions for automotive applications
Clean fluid is the lifeblood of automotive manufacturing. If you can’t stay on top of particulates and contamination, you’re continuously in danger of unscheduled downtime, increased rejection rates—and soaring losses. The solution begins with better filtration and ...
By Trucent based in Dexter, MICHIGAN (USA).
-
Transport & Logistics - Receiving And Profiling Goods
Profiling all in-coming goods with dimensions, weight and ID, provides the foundation for maximizing warehouse space, controlling content of supply, packing orders optimally, and much more. METTLER TOLEDO’s data capture solutions automatically collect the data required for improving the value and reliability of your inventory ...
By Mettler - Toledo Int. Inc based in Greifensee, SWITZERLAND.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you