The restricted operating spaces on board of a boat make essential the use of compact shredders for optimizing it. These shredders must ensure the required performance in terms of shredding capacity. SatrindTech proposes three models: one at 3hp, one at 10hp and one at 15hp. SatrindTech’s shredders at 3hp are MARPOL 73/78 – Annex V, approved. The other two models available, the 10 and the 15hp models can use special blade sets that can grant the same performances of the certified shredder. The goal to...
The volume reduction of food scraps is operated for an optimization during the handling and transportation. The two-shaft shredders used for this application allows a reduction in the volume of more than 60% of the initial one.
The Industrialisation of the XIX Century has seen drastic increase of all means of transportation. The invention of the automobile brought relief in the life of people, but nowadays, those cars, lorries and buses are responsible for many airborne pollutions and impact not only in megapoles but also in rural areas. The need of cleaner cars has brought new tigher regulations and the need for careful monitoring of automotive emissions. Our photoacoustic photometer are participating in that effort to curbe the...
With vessels, such as MS Harmony of the Seas or MSC Oscar, getting bigger and bigger, pollutions issues are becoming more relevant daily as they cruise along our coasts. Regulations are becoming tighter to reduce the NOx, SOx and Green House Gases emissions. More information can be found on the IMO Marine Engine Regulations. Our instruments have been designed to help local maritime authorities monitor such gases (NOx, SOx, GHG) and to help designing fuel with lower sulfur content.
Measuring Fat and Oil in Food using the MQC Benchtop NMR Analyser. Fat and oil in food play a key role in determining the nutritional value, product quality and consumer appeal of the products in which they are incorporated. Routine and accurate measurement of the fat and oil in food is also necessary to ensure that products are in compliance with labelling statements.
Measuring Fluorine in Industrial and Construction Waste using Benchtop NMR MQC Analyser. Processing and recycling of industrial and construction waste often requires measuremetns of fluorine content in the materials. It mostly relates to monitoring potential emission of toxic fluorine gas and optimisation of the waste processing. Our benchtop NMR analyser MQC systems provide a fast, simple and accurate method of measuring fluorine in liquid and dry waste. The NMR technique does not require the use of any chemicals...
Measuring Fluorine Content in Mineral Powders and Ores using the MQC Benchtop NMR Analyser. Fluorine-containing minerals such as fluorspar (fluorite) and cryolite are natural sources of fluorine that are widely used in the chemical industry (manufacturing of hydrofluoric acid and fluoropolymers for example), metallurgy (steel and alumina processing), the pharmaceutical industry and others. The fluorine content often has a significant effect on the processing of such mineral powders. Therefore, it is essential to...
Limestone filler is added to asphalt flux used for roofing shingles, primarily to reduce cost but has additional benefits of shingle durability and flame retardancy. The content of limestone filler in asphalt must be measured during and after the mixing process to ensure product consistency.
Having obtained a Pc curve, pore throat distributions can now be calculated using the Washburn equations. The imbibition and secondary drainage curves generated by the NMR Pc measurement also allow USBM wettability to be predicted. Both of these calculations are integrated into the software, and follow as a natural consequence of the NMR Pc data. A further added advantage is that the NMR measurement is non-destructive and can use reservoir fluids and reservoir wettability.
GeoSpec2 instruments fitted with Pulsed Field Gradients (pfg) are able to carry out measurements dependent on the diffusion, flow, or distribution of the fluids within the core sample. One application is for fluid typing. It is possible that different fluids, such as heavy oils and partially bound water, may exhibit similar T2 values, which makes it difficult to identify which fluid is which using a standard T2 distribution. However, even if they have similar T2 values they are unlikely also to have similar...
Treating algae in ponds with ultrasound reduces odor problems without harming the ecological balance in the pond. Eliminate up to 70-90% of the algae. Reduce odor problems. Safe for fish, plants and other aquatic life.
We provide AmmTX3. By blocking specifically the Kv4 channels, AmmTX3 reduces the A-type potassium current through these channels almost completely.More information please visit our website: https://www.creative-peptides.com/product/ammtx3-item-r0861-34663
Creative Peptides is specialized in the process development and the manufacturing of bioactive peptides. More information please visit our website: https://www.creative-peptides.com/product/r8-t198wt-item-r0863-34665.html
Creative Peptides is specialized in the process development and the manufacturing of bioactive peptides. More information please visit our website: https://www.creative-peptides.com/product/ar-m-item-r0870-34672.html
Creative Peptides is specialized in the process development and the manufacturing of bioactive peptides. More information please visit our website: https://www.creative-peptides.com/product/m871-item-r0871-34673.html
Creative Peptides is specialized in the process development and the manufacturing of bioactive peptides. More information please visit our website: https://www.creative-peptides.com/product/calcium-like-peptide-item-r0872-34674.html
Creative Peptides is specialized in the process development and the manufacturing of bioactive peptides. More information please visit our website: https://www.creative-peptides.com/product/d15-item-r0873-34675.html