Applications available in Pakistan
-
Thermal Analysis Mass Spectrometry
Hiden offers optimized interface coupling to a range of thermal analysis systems including: TGA-MS and TGA/DTA-MS systems: Hiden Isochema IGA - intelligent gravimetric analyser, PerkinElmer-TA Instruments- Netzsch- Mettler Toledo- Seteram Calorimetry: Mass spectrometry for simultaneous evolved gas/calirometry analysis. Evolved gas analysis compliments the calorimetric data providing reaction kinetics data and speciation of reaction off gas. Solid Insertion Probe: An integrated solid insertion probe mass ...
By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.
-
Residual Gas Analysis
Residual Gas Analysis is a general term for the analysis of gas and vapour species in vacuum chambers and vacuum processes. The Hiden RGA series quadrupole mass spectrometers provide for routine, fast, wide dynamic range residual gas analysis, measuring the partial pressures of the species that are critical to vacuum quality and process requirements. Applications include: vacuum chamber leak detection vacuum quality measurement and monitoring virtual leak detection outgassing studies bakeout ...
By Hiden Analytical Ltd. based in Warrington, UNITED KINGDOM.
-
Wireless multiple parameter monitoring
Monitoring multiple sensing points including fill level, pH, conductivity, and flow—often from varied locations in a large water treatment plant—can be a challenge. With four analogue inputs, a single SureCross Node can easily centralize and transmit critical monitoring information from multiple Sensors or controllers. Banner’s unique power management capability enables a single Node equipped with a FlexPower™ optimized QT50U or T30UX ultrasonic analogue sensor (level detection) to operate ...
By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).
-
Gas detection for the water industry
Frequently regarded as a simple commodity, water is a vital element of day-to-day life, both for personal health and to industrial and commercial users. Over its 40 year history Crowcon is therefore proud to have provided a wide variety of water industry users with gas detection ...
By Crowcon Detection Instruments Ltd based in Milton Park, UNITED KINGDOM.
-
Odor control for metal casting
Use Ecosorb products to remove foundry smells naturally. Ecosorb odor control products by OMI Industries are extremely effective at breaking down and eliminating the many odorous gases produced by the metalcasting process. They chemically convert foul and potentially harmful gases into non-odorous byproducts. Within the metalcasting industry, Ecosorb products are effective on amines, sulfur dioxide, phenols, formaldehyde, ammonia, partially burnt hydrocarbons solvent odors and ...
By OMI Industries (OMI) based in Palatine, ILLINOIS (USA).
-
Odor control for refining/petroleum
You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including ...
By OMI Industries (OMI) based in Palatine, ILLINOIS (USA).
-
Methane and Carbon Dioxide Sensing for Landfill Applications
Application: In March 1986 an explosion destroyed a bungalow adjacent to a landfill site in Loscoe, Derbyshire. Subsequent measurements showed that 150-200 cubic meters of gas per hour were being generated by landfill waste. This event triggered a change in the way the waste industry considered and regulated gas generated at landfill sites; resulting in the landfill regulations of 2002, and in particular LFTGN03: the Guidance on the Management of landfill ...
By Edinburgh Sensors Ltd - TECHCOMP Group based in Livingston, UNITED KINGDOM.
-
Radionuclide Monitoring for Nuclear Power Plants
The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant's radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to ...
By Acoem Australasia based in Knoxfield, AUSTRALIA.
-
Slope Erosion Control
Problem: Soil particles are susceptible to being detached and carried away with concentrated runoff streams, forming rills and gullies that grow with time. The slope integrity is diminished, eroding the slope face and becoming a larger environmental and safety issue. Slopes steeper than the natural angle of repose for the slope materials require additional protection measures, as are slopes subject to more severe hydraulic ...
By Geo Products, L.L.C. - EnviroGrid Cellular Confinement (Geocell) based in Houston, TEXAS (USA).
-
Noise and vibration monitoring for city monitoring
Noise has become the primary source of environmental disturbance. In 2002, the European Union took decisive action in the form of directive 2002/49/CE relating to the assessment and management of environmental noise. Through the use of strategic noise mapping, every urban community must implement an action plan to combat noise pollution. The monitoring of noise levels in urban environments is therefore an essential ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Noise monitoring for airport noise
Air traffic is the source of several forms of disturbance to the surrounding area, including, in particular, noise pollution. Local residents in the vicinity of an airport are the most severely affected and are very conscious of the aircrafts' flight paths and the impact on their day-to-day living ...
By ACOEM GROUP based in Limonest, FRANCE.
-
Industrial Meshes for Sand Control Screens
Modern petroleum exploration technologies operate with filtration technologies that are actually put through in the well. As a basic component of these sand control screens, SolidWEAVE stainless steel mesh is used for the filtration because they meet the most extreme ...
By GKD - Gebr. Kufferath AG based in Düren, GERMANY.
-
Compact Filtration for Grinding / Grinding Processes
CompactFiltration - Filter systems for cooling lubricants used in grinding processes; Well-maintained cooling lubricants play an ever more important role in grinding processes, to ensure customers' requirements are met with regard to surface quality and adherence to ...
By GKD - Gebr. Kufferath AG based in Düren, GERMANY.
-
GIS software for environmental management sector
As scientists and environmental managers, you use GIS to study the environment, report on environmental phenomena, and model how the environment is responding to natural and man-made ...
By Esri based in Redlands, CALIFORNIA (USA).
-
GIS software for marine and coast industry
New geographic information system (GIS) technology tools enable you to better understand and represent the systems at work in the seas and oceans. From the coastal shoreline to the bathymetric bottom, marine GIS has been adapted and implemented to help you achieve your goals in coastal zone management, research, ocean industries, and ...
By Esri based in Redlands, CALIFORNIA (USA).
-
Final effluent monitoring for wastewater treatment industry
Industry and municipal waste-water (sewage) treatment plants have had to respond to environmental legislation such as the Urban Waste Water Directive, IPC, IPPC and now the EPR (Environmental Permitting Regulations). As successive legislation becomes more stringent, discharge consents have been progressively tightened, and the need for self-regulation has become more important. As a consequence, on-line instrumentation has been installed throughout waste-water industry to continuously to provide final effluent ...
By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.
-
X-ray fluorescence XRF analysis for environmental protection and waste management
To meet the requirements of new regulations and to protect the environment effectively, industries need techniques that enable the analysis of elements at lowest concentration levels. Bruker X-ray fluorescence (XRF) analysis is the most suitable analytical technique for handling different kinds of materials. Bruker’s XRF, ICP-MS, GC, TOF-MS, FT-IR, CBRNE products and applications help you to monitor contaminated land efficiently and quickly, to determine hazardous elements in the air and water, as well as to ...
By Bruker Corporation based in Billerica, MASSACHUSETTS (USA).
-
Waste water respirometry solutions for toxicity reduction tests
In industrial manufacturing companies, before a new process comes on-line, it is important to measure the toxicity of the effluent stream. This is especially the case for companies who treat their own waste. From the toxicity value (EC50) obtained, it may be a cost-effective solution to simply discharge the effluent to the treatment works at a slow and defined rate to minimise damage to the activated sludge. Following a period of acclimatisation it is often possible to increase feed rates to the plant and this can ...
By Strathkelvin Instruments Limited based in North Lanarkshire, UNITED KINGDOM.
-
Laser detection solutions for environmental monitoring
LDI laser remote sensing technology provides users with the tools to conduct broad and accurate environmental surveys of both water and ground in stressed environmental zones, which makes our products especially suitable for oil spill response operations. The technology is based on the Laser Induced Fluorescence (LIF) and realized by the Fluorescent Lidar Systems – FLS (LiDAR – Light Detection And ...
By Laser Diagnostic Instruments AS based in Tallinn, ESTONIA.
-
Stack emissions monitoring
Monitoring stack emissions is a fundamental requirement for most industrial processes. Our gas analysers, dust monitors and flow monitors are designed for a wide range of applications and can operate as a fully integrated system or as stand alone ...
By Codel - a Forbes Marshall company based in Bakewell, UNITED KINGDOM.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you