Dürr MEGTEC has pioneered and successfully implemented simultaneous two-side horizontal, tensioned web coating. The benefits of simultaneous two-side coating are: Lower costs, simple factory layout, increased productivity, improved quality from no edge curl, high dimensional accuracy and lowest coat-weight tolerances, improved process flexibility, allows for inline calendering/roll pressing.
Dürr MEGTEC automatic match-speed splicers help manufacturers increase productivity and reduce waste. Dürr MEGTEC delivers a full system from the wrapped roll converted to a web at the right tension and lateral position, along with high splice success rates, fewer web breaks, simple splice preparation, and low maintenance.
Evaporative gas cooling and conditioning systems use specially engineered atomizing nozzles that introduce a controlled amount of finely atomized water into the hot gas stream to reduce and/or maintain gas temperature. The water evaporates completely while absorbing heat from the gases, which results in free-flowing dust, zero liquid discharge, and minimal or no problems with scale buildup on the walls.
In the industrial sector, drying and curing technologies from Dürr MEGTEC have been deployed in roll-to-roll processing applications for advanced battery materials, coatings of various types, composites, solar films, membranes, flexible packaging, coil coating, converting, printing, electronics, nonwovens, and other industries. Our patented flotation air bar systems transport webs contact-free without web shift, which helps ensure product quality. Capable of handling webs at a wide range of speeds and...
HITEMA with its range of product solutions is able to grant an energy and water saving maintaining a precise an stable temperature control for the operations of welding machines, for precision machine tools, metal cleaning processes where the precise cutting oil and hydraulic fluid temperature permit high speed operations and low maintenance costs, it permits also to increase the productivity and the lifetime of the machining center.
One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.
All types of ceramics from fine china to brick manufacture use materials which are extremely hard on pumps. The daily wear on plant and the cost of rejected product can be enormous, and the constant need for manufacturers to drive down costs make savings in these areas vital.
While land-based industry has been subject to strenuous emissions regulations over the past decades, air emissions from sea-going ships’ machinery has so far been largely unregulated. As a result, according to EU statistics, ships have become the single biggest source of sulphur dioxide (SO2) within the EU. The US EPA (US Environmental Protection Agency) reports similar findings, i.e., that the proportion of air pollutants released which can be attributed to the shipping industry is increasing. MARPOL Annex...
Focuses on medium NOx, NOx-related and multigas-concentrations up to 5’000 ppm where flexibility is a central requirement. Parameters included are NO, NO2, NOx, NH3, NOx-amines, O2 and CO2. Typical supported applications are industrial emission monitoring and gas manufacturing control.
WesTech partners with manufacturing in every industry worldwide. For raw water treatment, wastewater treatment and water reclamation, process equipment supplied and manufactured by WesTech is designed to work and built to last. Design-build, plant expansions, and upgrades are each approached from a holistic view of the flow sheet and a broad base of experience in yours and other industries with similar challenges, always with an eye for efficiencies that go to the bottom line.
A large selection of panel mounted pumps and pump heads for use in Original Equipment Manufacture (OEM). These pumps are custom engineered to integrate within your own equipment whenever accurate and repeatable dosing or liquid transfer is a must. Pumps can be supplied with a range of power options including both A.C or D.C. motors.
Production of aluminum from its ores at aluminum smelters results in carbon dioxide CO2, carbon monoxide CO, sulfur dioxide SO2, and hydrogen fluoride HF gas emissions during the electrolytic process phase to the atmosphere. The gas emissions need to be monitored. Typically the smelters have emission limit values (ELVs) for sulfur dioxide and hydrogen fluoride emissions. These emissions should be measured accurately and with good precision, to ensure the smelter does not exceed its emission limit values. In...
Quicker, easier, safer transportation means are required. Depending on geographical zones, tunnels can be a must to reach your final destination easily. Decades of experience in tunnel constructions with TenCate Polyfelt P have shown that protection geotextiles replaces the need for drainage material around the tunnel lining.
Crystal-clear water in zoos and aquariums. Fresh water = marine animals and sea dwellers full of energy. By reliably treating salt water and fresh water, ProMaqua technology creates the optimum conditions for sharks, polar bears, turtles and other marine animals.
All customers have their own individual requirements and specific general conditions. So our experts use their extensive engineering skills and work closely with the customer to develop the right solution every time. This produces a wealth of different applications, which have been used in numerous projects around the globe over the last five decades. With a clear structure of "problem – solution – result", our references from various industries worldwide provide a good starting point and assistance.