Applications available in Puerto Rico

  • Premium

    Water & wastewater treatment solutions for industrial

    Fluence has decades of experience delivering cost-effective and sustainable treatment solutions for a wide range of industries.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Parallel evaporation in environmental consultancy

    For a fast and effcient sample concentration in order to monitor de pollution of the environment

    By BÜCHI Labortechnik AG based in Postfach, SWITZERLAND.

  • Premium

    Solid/liquid separation for environment

    Tight municipal budgets. Water shortages. A need for renewable energy. Today, there is simply no room for waste. Getting the most efficient solid/liquid separation is essential not just to profitability but ensuring sustainable growth.

  • Premium

    Wastewater treatment management for humanitarian industry

    According to the World Heath Organization (WHO), more than one billion people lack access to safe drinking water and sanitation worldwide, and for this reason, water borne illness has become the leading cause of death. In fact, water borne disease kills more than 3.4 million people each year due to lack of clean water and sanitation treatment. Mobile water treatment systems solve these water contamination issues and save lives across the world.

    By Genesis Water Technologies, Inc. based in Maitland, FLORIDA (USA).

  • Premium

    Continuous emissions monitoring in cement kilns

    Various pollutants form in the cement manufacturing process, especially when alternative fuels and waste-derived fuels are used. Typically a cement kiln using these fuels is a required to monitor hydrogen chloride (HCl). Gasmet CEM II is EN 15267-3 approved for HCl measurement in 0 … 15 mg/Nm3 range.High process temperatures result in generation of more nitrogen oxides (NOx) than in typical municipal waste incineration.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Laboratory instruments solutions for environmental industry

    The environmental challenges require internationally accepted standards, in which limits and test methods are defined. Metrohm instruments and applications comply with a lot of international environmental standards. Substances introduced into the environment are distributed among the environmental compartments water, soil (sediment), and air, as well as among the organisms living in them (biosphere). Only if we know the type and quantity of these contaminants can we protect the environment and its inhabitants.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Peristaltic pumps and fluid path technologies for OEM solutions

    Watson-Marlow peristaltic pumps are fitted as original equipment to a vast range of products where accurate, safe and reliable transfer, metering and dosing duties are required.

    By Watson-Marlow Fluid Technology Group based in Falmouth, UNITED KINGDOM.

  • Premium

    Flow meters for the environmental flow solutions

    Our flow measurement technology is ideal for applications ranging from landfill emissions to wastewater treatment and numerous applications in between. We have developed many flow meters and controllers to measure the emissions from landfills and other green house gas producers, in addition to being a long standing leader in the testing of emissions for large engines. Water treatment is also an important driver for the company as we continue to develop innovative solutions for waste water treatment.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Intelligent compliance solutions for utilities industry

    Utilities are under tremendous pressure, receiving intense regulatory, legislative and public scrutiny to modernize their infrastructure, update transmission lines and equipment, and reform energy regulations. Verisk 3E`s, powerful suite of outsourced services can be tailored to assist all kinds of utility companies, such as electric, gas, nuclear, sanitation, and water companies, in maintaining compliance and improving EHS performance.

    By Verisk 3E based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Mining & minerals solutions for man camps industry

    In remote locations and mine sites distant from the nearest outpost, WesTech provides package plants for water treatment and for wastewater process that allow for drinking water to be made onsite and basic levels of sanitary safety to be met, allowing for continued production and a healthier site and workforce.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Premium

    Chemiluminescense based analyzer for environmental applications

    A broad range of NOx analyzers for indoor, clean room, ambient, tropospheric and stratospheric monitoring. ECO PHYSICS offers a broad range of NOx analyzers for indoor, ambient, tropospheric and stratospheric monitoring. The principle of chemiluminescence detection is an extremely selective method for measuring nitrogen oxides precisely, with high linearity over a wide concentration range and with very high reproducibility. These qualities are the basis for the acknowledged high performance of ECO PHYSICS CLD NOx analyzers in tracing nitrogen oxides even down to the low ppt level.

    By ECO PHYSICS AG based in Duernten, SWITZERLAND.

  • Premium

    Flow meters solutions for developing economies

    Mass flow meters and mass flow controllers help developing countries explore their natural resources. Our thermal flow meters are widely used in flotation cells in mining. Our multivariable mass vortex flow meters are used in the oil and gas industry both at the wellhead and in the refinery. Thermal mass flow meters also have a place in the power generation industry where they are used to measure and control fuel-to-fuel air ratios.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment, ANDRITZ offers a broad range of products for renewable energies as well as environmental and climate protection.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Premium

    Emission Control Systems for Mechanical Evaporation Industry

    Modern nozzle and turbine technology developed by EmiControls is also used as a basis for the evaporation of water. This might typically be needed in open-pit mining, for example, to deal with large unwanted pools of water. Special nozzles can be used to atomize the water for evaporation. Evaporation is also useful in salt production. The tried and tested EmiControls technology can make the rate of evaporation much faster than the natural speed of evaporation, which helps the operators save an enormous amount of time.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Monitoring of mercury in ambient air

    Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring problems. The use of a mercury analyzer RA-915M/RA-915+/RA- 915Light with Zeeman background correction provides di rect real-time continuous determination of mercury in air from 0.5 ng/m 3 within the overall possible range of me rcury concentration in ambient air.

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Storage and Loading Areas

    The amount of dust generated when storing and moving various materials, such as wood, coal and ore, is very high and poses a severe health hazard. EmiControls offers customized solutions for dust control, thereby creating a pleasant, healthy and safe environment for workers and nearby residents. Fixed dust control installations on funnels, conveyor belts and at discharge points are just as suitable for use as mobile units – the right solution to any given problem is identified during the planning and consultation phase.

    By EmiControls based in Bolzano, ITALY.

  • Premium

    Machine condition monitoring for racing

    Overview

    Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. 

    Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, build and test racing engines also are Spectro Scientific customers. We welcome the opportunity to continue to be of service to existing customers and to assist new customers with their oil analysis instrumentation requirements.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Machine condition monitoring for trucking fleet

    Overview

    Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive event.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you