Applications available in Puerto Rico

  • Premium

    Water monitoring technology for oil & gas

    Monitoring natural water bodies surrounding oil and gas drilling activities like hydraulic fracturing is a key issue in environmental monitoring and regulatory compliance.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Oily Waste Plants for Oil and Gas Industry

    Wherever oil is produced, processed, transported or stored, our clients face large amounts of oily waste in many different forms. Our VacuDry technology allows efficient and environmentally friendly treatment of all oily waste streams within a single plant. Due to the conditions under which the waste is treated (low temperature, vacuum and nitrogen blanketing), the recovered oil can then be reused after treatment.

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Water & wastewater treatment solutions for oil & gas upstream industry

    Sustainable Technologies for Treating Produced Water for Reuse or Deep Well Injection. Oil and gas exploration and production are highly complex and capital-intensive processes. Producers face many challenges, including the constraints of climate, environment, and geography. As companies extract oil and gas in areas that at one time were considered unpromising, water plays an ever more essential role.

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Odor control for refining/petroleum

    You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.<...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety...

    By econ industries services GmbH based in Starnberg, GERMANY.

  • Premium

    Electrochemical solutions and water technologies for oil & gas

    With more than 2000 electrolytic disinfection systems globally for oil and gas applications, De Nora understands the requirements that operators have to ensure they operate safely, effectively and as efficiently as possible.

  • Premium

    Fly Ash - Industrial Vacuum

    Fly Ash can cause many problems. The Vac-Con & Vector Pneumatic Vacuum systems can assist and solve many of these problems. Our high-performance vacuum systems are manufactured in three basic configurations: Truck mounted, Trailer mounted, and Fixed/static installed. Any of these systems can be integrated into the existing power plant design. All of our vacuum systems can be utilized to solve your plant’s fly ash removal/clean-up needs and can assist in many other maintenance projects. All can be tailored to fit...

    By Vac-Con, Inc. based in Green Cove Springs, FLORIDA (USA).

  • Premium

    DETERMINATION OF FATTY ACID METHYL ESTER (FAME) CONTENT IN DIESEL FUEL OR DOMESTIC HEATING FUEL BY MID-IR SPECTROSCOPY

    Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

  • Premium

    Air combustion for the petroleum refining industry

    By AEREON based in Austin, TEXAS (USA).

  • Premium

    Thermal oxidation for the oil and gas industry

    By Process Combustion Ltd based in Harrogate, UNITED KINGDOM.

  • Premium

    Measurement of C1-C5 hydrocarbons for oil & gas exploration.

    The PetroAlert Model 8900 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing fast analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration. The PetroAlert Model 8900 uses a dual column configuration with timed backflush to vent which is used to strip off moisture and C6+ hydrocarbons. A pre-cut column is used in series with the analytical column. At sample injection a...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Oil & gas fluid flow solutions

    Assure accurate and repeatable gas, liquid and steam measurement throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.  Our volumetric vortex flow meters, multivariable mass vortex flow meters, ultrasonic flow meters and thermal mass flow meters are used for precision measurement in the oil and gas industry.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Water treatment solutions for oil and gas industry

    "Made in Germany" for the global oil and gas industry. ProMinent`s tailored products are made in Germany. Designed as complete solutions and manufactured in-house, they are quickly ready for use (up-, mid- and downstream).

    By ProMinent Group - ProMinent GmbH based in Heidelberg, GERMANY.

  • Premium

    Aeration and mixing technologies for oil and gas wastewater treatment

    As more hydraulic fracturing wells come into operation, the stress on surface water and groundwater supply increases. The expanding volume of wastewater created needs to be captured, disposed of, or recycled in an environmentally sustainable manner so the EPA continues to increase regulations.  We will work with you to create a comprehensive solution to treat your wastewater, meet increasingly strict governmental regulations, and support long term water life cycle management.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Determination of benzene in gasoline

    Introduction

    Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards...

    By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you