Applications available in Solomon Islands

  • Premium

    Hazardous waste treatment solutions for oil and gas industry

    There are a wide amount of applications for our VacuDry® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    NORM Waste Plants for Oil and Gas Industry

    Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Drill Cuttings Plants For Oil and Gas Industry

    Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Mercury Waste Plants for Oil & Gas Industry

    Mercury-contaminated wastes are a major challenge for many industries including the chlorine industry, oil & gas drilling, oil & gas refineries (catalysts) and fluorescent lamps recycling. Due to strict legal restrictions and HSE requirements, mercury-contaminated waste is required to be handled with special care. We at econ industries have the best solution for each specific mercury waste stream, with plants that are recognised as being state of the art from approval authorities worldwide.

    By econ industries GmbH based in Starnberg, GERMANY.

  • Premium

    Reverse Osmosis Water Testing

    Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Coating and Laminating

    MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Wastewater Treatment

    Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Algae Control (Waste)Water treatment plants

    The LG Sonic technology controls suspended and filamentous algae without killing beneficial bacteria in (Waste)Water treatment plants.

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher, thermal oxidizers to meet prescribed emission limits and odor levels. In RDF Plants, Syngas, Gasification, Gas Engine and Biogas Upgrading applications, we employ thermal oxidizers, particulate removal and DeNOX systems, for the control of VOC, NOx, CO and particulates to prescribed emission limits.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Algae control in lakes

    “If you need a method to control algae in lakes or on other large water surfaces without chemicals the LG Sonic technology is your solution. 1 LG Sonic device controls algae in a range of 200 meters, nearly maintenance free and on without causing any harm to the ecosystem present”

    By LG Sonic based in Zoetermeer, NETHERLANDS.

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Electronics

    In the fast-changing electronics industry with its need for new materials and products, demand for 100% uptime, smooth production operation, many in clean-room environments, MEGTEC meets and exceeds continuous demand for raising the bar of technology excellence. MEGTEC works either directly with the end user or through engineering firms or contractor companies, offering tested package systems as required and our end user list includes most of the well-known manufacturing companies around the globe including producers of ceramic condenser/capacitor, thin film FCCL, solar back film, plasma and LCD screen makers in Asia. We have the breadth of technologies in our portfolio and with our strong engineering design capabilities, collaborate from each of our global facilities and can review your application and recommend the best solution.

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Dosing pumps for water and wastewater treatment industry

    Peristaltic pumps are proven performers in water and waste treatment solving problems including: Dosing and metering treatment chemicals and reagents including ferric chloride (“Ferric”), sodium hypochlorite (“Hypo”), chlorine water, lime (Kalic or Kalkmilch), caustic soda, powder activated carbon and polymers, sludge transfer, filter press feeds.

    By Verderflex Peristaltic Pumps - part of the Verder Group based in Castleford, UNITED KINGDOM.

  • Premium

    Television recycling

    By ATN Engineering B.V. based in Stadskanaal, NETHERLANDS.

  • Premium

    Odor control for food processing

    Safely Eliminate Odors Created By Food Processing: Malodors generated by the food processing industry vary enormously since they can be generated in the production, processing, and wastewater treatment areas of the plant. Regardless of the source, all of these odors may be offensive to the public.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for rubber and plastic

    From process to product, we remove odors from rubber and plastic. Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries. Ecosorb odor neutralizing products feature a proprietary, natural and environmentally safe formulation that’s fast acting and effective at removing detrimental polymer odors without the use of masking agents or fragrances.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for municipal and government

    Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for tank cleaning

    When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you