Applications available in South Africa

  • High performance filtration & separation system for amine

    There are a number of factors that affect the capacity and operation of a typical amine system. Solid or liquid contaminants in the system may cause foaming. The presence of foaming is typically addressed by the addition of expensive antifoam chemicals and/or by reducing the operating capacity of the amine system. In addition to this, the presence of contaminants in the system can foul heat exchangers and column packing or trays. These solid and liquid contaminants are either ingressed into the system with the feed stream, or generated within it as a result of the chemistry of the system. These contaminants are typically addressed by means of particle filters and carbon adsorption.

    By Pentair Filtration Solutions, LLC based in Conroe, TEXAS (USA).

  • Water treatment solutions for the hospitality industry

    For Kinetico, that realization extends to the importance of specialized water treatment solutions customized for specific, wide-ranging applications. Our filters and softeners come in a variety of configurations designed to produce safe, clean drinking water and remove contaminants and hardness. This greatly improves overall water quality and protects expensive (and essential) boilers, laundry facilities and commercial kitchen appliances. To convert first-time guests into repeat customers and to safeguard your costly equipment, turn to Kinetico for the highest-quality water.

    By Kinetico - an Axel Johnson Company based in Køge, DENMARK.

  • Continuous emission monitoring for municipal waste incineration

    Local authorities incinerate domestic waste and other kinds of waste that typically include plastics, batteries and a diversity of unknown compounds. These may all produce acidic and other toxic emissions. Therefore, efficient flue-gas cleaning systems are needed to prevent their release into the environment.

    By Enviro Technology Services Ltd based in Stroud, UNITED KINGDOM.

  • Environmental monitoring solution for aluminium industry

    Measurement of particulates, SO2, NOx, fluorides and greenhouse gas emissions from the aluminium industry requires careful selection of instrumentation. Ecotech offers a complete monitoring solution tailored to this industry.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Processing of Alternative Fuels for the energy industry

    RDF is a fuel that is normally produced from waste with high calorific value. The original waste comes from households, industry and commerce and is processed for energy extraction; it is meant for co-incineration plants and replaces standard fuels (e.g. coal) in production plants for cement, power plants or other co-incineration plants.

    By Lindner-Recyclingtech GmbH based in Spittal/Drau, AUSTRIA.

  • Indoor air quality measurement

    CairTub allows the easy deployment of autonomous measurement points virtually anywhere. The system can be used in harsh weather conditions. It is also the ideal tool for low cost studies for the optimisation and setting-up of fixed air quality monitoring stations. Cairpol systems can be used for fugitive emissions and odour measurement on industrial sites like waste water treatment plants (WWTP), landfill, compost plant, along a street or motorway, or in any sensitive area. Cairpol monitoring systems also offer the possibility to measure continuously pollutant levels in workshop atmospheres, houses and public buildings.

    By Cairpol Environnement S.A based in POISSY Cedex, FRANCE.

  • Port, Harbours & Terminals

    Ports, harbours and terminals demand special consideration as the equipment requirements can vary significantly. This could range from the simple, inexpensive environmentally friendly ‘A’ Boom to OilFence, a rugged asymmetric boom. OilFence can boast in excess of 15 years of service in permanent deployment applications and due to its massive reserve buoyancy, it can support ‘fish-net’ suspended from the boom itself. Many of the recovery systems in the nearshore and shoreline segment can be employed in ports, harbours and terminals. However, we also offer the versatile ‘Mop’ systems which can be installed to influence a large surface area. Indeed, ‘Mop’ skimmers have also proven themselves in the open waters, oil pits and industrial applications.

    By DESMI A/S based in Noerresundby, DENMARK.

  • Manufactured Gas Plant Site Remediation

    It is estimated that there are over 3,000 former Manufactured Gas Plant (MGP) sites across the United States. Another 4,000 dot the landscape of Canada, the UK, continental Europe and Japan. These sites were built long ago on rivers or harbors, often on the outskirts of towns and cities; locations that are now frequently in close proximity to infrastructure, buildings and residential areas. Many underlie or abut valuable commercial, residential, and municipal properties, posing environmental hazards to ground and surface waters. The urgency of remediation has increased due to a potent blend of community activism, regulatory pressure, high real estate values, and the need to reduce liability in light of the Sarbanes-Oxley Act and other measures.

    By TerraTherm, Inc. based in Gardner, MASSACHUSETTS (USA).

  • Microbial formulations for municipal sector

    MICROCAT microbial formulations from Bioscience, Inc., are blends of specialized, naturally occurring microbes and other ingredients that work together to solve the most common, damaging problems inherent to municipal wastewater plants. By augmenting existing microbial populations, MICROCAT products naturally aid in stabilizing municipal sewage treatment and collection systems, enhancing their ability to break down difficult-to-degrade wastes and handle highly variable waste treatment conditions.

    By Bioscience, Inc. based in Allentown, PENNSYLVANIA (USA).

  • Gas analysis & monitoring systems for soil degassing

    The migration of magma towards the surface in a volcano is usually accompanied by the release of gas that was previously dissolved in the magma itself. In an open conduit volcano, most of the gas escapes through the main conduits of the volcano and then through the craters. However, a significant proportion (approximately 10%) of the total quantity of gas can escape laterally through faults and fractures that are normally present in the flanks of a volcano. Therefore, increases in the amount of gas emitted usually indicate the initial stages of magmatic migration towards the surface.

    By ETG Risorse e Tecnologia S.r.l. based in Montiglio, ITALY.

  • Water Monitoring and Flow Measurement Systems for Water Power

    Hydro power contributes to supplying approximately 3,5 per cent of electric energy generated worldwide. Its share in power generation from renewable resources lies at 18 per cent and will continue to grow as resources of fossil fuels are depleted. Hydro electric performance depends essentially on the usable altitude difference between upper and lower reservoir, and hence the resulting water flow. In order to use the “fuel” water in an optimal way, the flow velocity has to be monitored without any interruptions. Ultrasonic flow meters, flow sensors and clamp-on flow meters (OR clamp-on technology) are ideal for accurate flow metering and flow monitoring.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Gas Detection and Analysis Equipment for Energy Generation Industry

    Recent decades brought a rapid growth in the global demand for energy. This trend is accurate for both developed as well as developing countries. Electrical power is a key source of energy for the vast majority of the world population. Although the usage of renewable energy is on the rise, the majority of electric power production worldwide is still based on conventional methods utilizing coal, oil and gas as its fuel to power the stations.

    By Opgal Optronic Industries Ltd. based in Karmiel, ISRAEL.

  • Wastewater treatment for the other industries

    Water is the most widely used consumer good in the world. Save on water consumption and expensive canal dues with AWAS wastewater treatment and process water circulation technology. 

    By AWAS International GmbH based in Wilnsdorf, GERMANY.

  • Pumps for Oil Blending

    Operations like oil blending, additive mixing and filling of the finish lube oils are fully automatic batching processes, performed within parallel lines, each consisting of one blender and one weigh hopper. The process requires quality pumps – and around the world DESMI has been a reliable partner for many years as our ROTAN® GP and HD series are designed for giving an accurate and constant flow to support this process. Our stainless steel pump, ROTAN® CD, is also frequently used when special additives demand a higher material standard to give the best possible life cycle cost solution. Keeping the weight ratios of the lube oil components is ensured by their precise weighing and is program-controlled by remote opening and closing of dedicated valves. Basic feeds to the blending process are the base lube oil stocks.

    By DESMI A/S based in Noerresundby, DENMARK.

  • River Level Monitoring -

    SUMMARY Fielded water level measurement stations, based on GaugerGSM sensor, report real time stream levels and flow. Stations are located across a stream-rich region of the upper Galilee feeding the Jordan river in the northern part of Israel. The region is a popular tourist destination due to its biblical origins, rich flora and fauna. Field data is available over the Internet to authorized engineers, site supervisors and Government officials. remote monitoring station - close up THE NEED The water basin in the Upper Galilee maintains a delicate balance between recharges, net precipitation, domestic and irrigation consumption, and water tourism (canoeing). Local and state officials are tasked to study the tradeoffs, manage risks and take actions to keep the balance. Monitoring stations are essential for data collection. remote monitoring station - overall

    By Solid Applied Technologies Ltd. (SolidAT) based in Ashkelon, ISRAEL.

  • Process monitoring and controlling for wastewater treatment industry

    Automation can save money, optimise a process and give warning of potential breeches of discharge consent. However, instrument selection is fundamentally important if a control system is to function efficiently. The measurement device must accurately and quickly respond to process variations and it must be reliable in operation if the control system is to function as intended. Designed properly, energy and chemical use can be significantly reduced, saving money and ultimately improving effluent quality.

    By Pollution & Process Monitoring Ltd based in Sevenoaks, UNITED KINGDOM.

  • Best-in-class Carbon Footprinting and Reporting Tool for Organisations

    Our Impacts is the web-based energy, travel, waste, water and carbon accounting platform you’re looking for. Trusted by hundreds of clients worldwide and created by the most experienced environmental analysts and software developers you can find. Its white-labeled version allows professionals to service and manage their clients directly through the platform.

    By Ecometrica based in London, UNITED KINGDOM.

  • Oil Mist Seperator for Building Construction

    Contec oil mist separators ensures the façade design of ETFE cushions for efficient and environmentally friendly glare-, heat- and UV-protection. Contec GmbH, Bad Honnef is a leading manufacturer of filtration systems, oil mist separators and liquid level measuring technology. The use of the Contec oil mist separator (COMS) in the field of building construction is definitely very innovative and our system has proven again its advantages in environmental aspects.

    By contec GmbH Industrieausrüstungen based in Bad Honnef, GERMANY.

  • Airport Bird Control

    Scarecrow bird dispersal systems continue to be a leading solution for airport bird control as they have been for the past 32 years.

    Scarecrow’s airport bird control products use state of the art bio-acoustic technology for bird dispersal and bird strike avoidance. The safe and reliable removal of birds from airports is essential to the health and safety of passengers, staff and wildlife alike.

      • Reduce the risk of bird strikes using bio-acoustic technology

      • Safe and humane dispersal of birds for airports and aviation sites

      • The leading bird control system for major international airports

    By Scarecrow based in Maresfield, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you