Applications available in California

Safely Eliminate Odors Created By Food Processing: Malodors generated by the food processing industry vary enormously since they can be generated in the production, processing, and wastewater treatment areas of the plant. Regardless of the source, all of these odors may be offensive to the public.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

From process to product, we remove odors from rubber and plastic. Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries. Ecosorb odor neutralizing products feature a proprietary, natural and environmentally safe formulation that’s fast acting and effective at removing detrimental polymer odors without the use of masking agents or fragrances.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

Eliminating industrial odors naturally is our civic duty. To handle the odor control needs of municipal and government agencies, OMI Industries has created MUNI odor neutralizing product. Similar in many ways to its siblings in the Ecosorb products line, Muni odor control product uses Van Der Waals forces to chemically react with malodor molecules to eliminate odors combined with a natural formulation that makes it safe to work with. What’s more, the Muni product is surprisingly economical to use. It was specially developed to meet the tight budget limitations faced by municipalities without skimping on industrial odor control effectiveness.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

When it comes to odor management, simply cleaning the tank isn’t enough to remove the odors. Prior to cleaning, storage tanks are vented to the atmosphere in order to reduce the internal gas content to a level below its lower explosion limit (LEL). This permits safe worker access. During venting, odors escape into the atmosphere creating a nuisance to nearby residents, businesses, and employees. Furthermore, storage tank cleaning results in production downtime that reduces plant profitability.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

You refine the fuel, we’ll remove the odors. Oil refineries and petrochemical plants may generate large volumes of odor from the processing and refining of different fuels. Sulfides, mercaptans, and hydrocarbon compounds are all closely related to the oil industry. The odors generated from these industrial compounds are of a high nuisance value and generally create concern among local air boards and the public. Ecosorb odor removal products may be used in a variety of areas around the refinery including water treatment facilities, sludge ponds, sulfur recovery units, and API separators. To remove odors during tank cleaning and maintenance operations, portable dispersion systems can be used in the immediate work area to control malodors. Ecosorb products can be directly injected into flues and stacks and may be used as a substitute scrubbing solution in some applications.

By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

The LG Sonic technology controls suspended and filamentous algae without killing beneficial bacteria in (Waste)Water treatment plants.

By LG Sonic based in Zoetermeer, NETHERLANDS.

“If you need a method to control algae in lakes or on other large water surfaces without chemicals the LG Sonic technology is your solution. 1 LG Sonic device controls algae in a range of 200 meters, nearly maintenance free and on without causing any harm to the ecosystem present”

By LG Sonic based in Zoetermeer, NETHERLANDS.

By controlling algae, cyanobacteria and fouling LG Sonic can efficiently reduce taste and odor problems in a treatment plant. The performance of a drinking water treatment plant is consistent with the amount ol contamination in the water. Growth of algae and other fouling in and before a treatment plant can cause various problems within the process. In general, these issues are related with taste or odor of the water. Growth of algae, cyanobacteria and bacteria within the basins of the plant itself, increase the demand of chemicals or filtration and in turn creating problems with THM (trihalomethane) formation. Other common issues are growth of toxin and geosmin producing cyanobacteria (blue-green algae) within the intake reservoir or dam. These molecules give the water an unpleasant `earthy ` taste.

By LG Sonic based in Zoetermeer, NETHERLANDS.

Most advanced and environmentally friendly solution for algae control in lakes.

By LG Sonic based in Zoetermeer, NETHERLANDS.

Prevent biofilm formation and lower fuel costs.

By LG Sonic based in Zoetermeer, NETHERLANDS.

Prevent biofilm formation and lower bacterial counts, and chemical consumption.

By LG Sonic based in Zoetermeer, NETHERLANDS.

Osmosis is the phenomenon of lower dissolved solids in water passing through a semi-permeable membrane into higher dissolved solids water until a near equilibrium is reached. Reverse Osmosis (RO) is a membrane process of purification which removes most of the the total dissolved solids (TDS) in water by reversing the natural process of osmosis. Pressure is applied to a TDS-concentrated solution against a semi-permeable membrane, causing pure water to diffuse through the membrane. RO has become an important process for a wide variety of applications including: medical, laboratory, desalination, industrial wastewater, Deionized (Dl) pretreatment, and drinking water.

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

MEGTEC’s experience and application know-how are at your command for tough drying and web handling applications such as slow-drying coatings and materials or thin film coating and laminating. Dryers can be equipped with a wide variety of nozzle configurations ranging from simple slot nozzles to sophisticated Coanda-style air bars and patented air foil systems. A full range of heat sources are available including steam, direct and indirect gas-fired, thermal oil, electric, hot water and IR. In addition, the air handling systems can be integrated into the dryer enclosure or stand-alone for remote installation. When the process requires pollution control systems for solvent-based applications, MEGTEC also offers regenerative thermal oxidizers, solvent recovery, distillation and purification systems. MEGTEC also offers waste heat recovery packages to “close the energy loop” between pollution controls and the process, in order to reduce production costs and increase customer profits

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Many industrial and pharmaceutical processes generate wastewater with volatile contaminants that increase the COD and BOD to a point where discharging to municipal wastewater is very costly or not an option. These contaminants can be removed from the water by distillation, substantially lowering the disposal cost, and, in many cases, the removed components can be further purified and reused in the process. MEGTEC offers the following solutions to remove the volatile contaminants and make wastewater suitable for discharge to most municipal wastewater treatment plants: Stripping columns using direct steam or a reboiler Distillation columns using indirect steam heat sources Our technologies have been applied to a range of processes including wastewater treatment from industries such as Pharmaceutical, Semiconductor, Chemical and Petrochemical.

By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA).

Sludge by-products from the metalworking industry have a high potential for recycling. Prolonged grinding processes can generate large amounts of highly valuable, alloy-rich sludge; consisting of metal powder and cooling lubricants. Inside our VacuDry system, the thermal separation of the liquids (hydrocarbons, eventually water) and solids (metal powder) takes place in an oxygen free atmosphere. This absence of oxygen ultimately eliminates material degradation by oxidation, and self-ignition or explosion risks. Operation under a low vacuum ensures the possibility to recover the cooling lubricants for later reuse. After the thermal treatment, for appropriate handling in the melting process, the metal powder is pressed into briquettes. With the econ VacuDry technology, 100% recycling of all ingredients is possible.

By econ industries GmbH based in Starnberg, GERMANY.

The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from the soil washing process. However, we are able to handle soil contaminated with mercury, hydrocarbons, PAH, PCB, dioxins, furans, organic-lead compounds and many more. VacuDry plants for on-site ex-situ remediation projects are delivered in a modular design.

By econ industries GmbH based in Starnberg, GERMANY.

OSE II ELIMINATING THE ENVIRONMENTAL FOOT PRINT WHILE REDUCING COSTS ASSOCIATED WITH DRILLING MUD, DRILLING MUD CLEAN UP, RIG WASHING, RIG OPERATIONS AND EMERGENCY OIL SPILL RESPONSE FROM OIL RIGS

By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).

There are a wide amount of applications for our VacuDry^® process within the oil and gas industry. A large variety of wastes and by-products that are generated in the oil & gas production chain can be treated effectively and sustainably. In past decades, numerous thermal desorption processes have been implemented worldwide, using a variety of heating chamber designs to separate hydrocarbons from the mineral solids. Such standard TDUs work under atmospheric pressure which can lead to safety risks, high energy consumption, larger emissions and limited flexibility regarding altering feed materials. Due to its unique design, the complications outlined above are avoided throughout the VacuDry^® process. When it comes to treating standard oily wastes, mercury-containing waste streams, NORM, and especially for the recovery of highly valuable drilling fluids from drill cuttings; our vacuum thermal desorption process (i.e. vacuum distillation) is economically unbeatable.

By econ industries GmbH based in Starnberg, GERMANY.

Natural Occurring Radioactive Material consists of materials enriched with radioactive elements found in the environment. They are usually brought to the surface by oil and gas exploration or mining. NORM wastes can be treated in a VacuDry® unit in order to prepare it for a safe sub earth disposal. Find more information, important key facts and the benefits of VacuDry® NORM waste plants on http://www.econindustries.com/applications/norm-waste

By econ industries GmbH based in Starnberg, GERMANY.

Common drilling procedures for oil and gas, used widely around the world, produce a consistently increasing amount drill cuttings containing oil. In some cases, drill cuttings even contain other hazardous components such as mercury or NORM (Natural occurring Radioactive Material), requiring special attention. Treatment of drill cuttings is therefore beneficial from both an environmental and an economic standpoint, allowing valuable drilling oil to be recovered, and ensuring environmentally sound disposal of the drill cuttings. Our VacuDry technology is designed to safely separate oil, water and mercury from the solids (including NORM), allowing reuse of the oil and safe disposal of the water, mercury, solids and NORM.

By econ industries GmbH based in Starnberg, GERMANY.