Applications available in Connecticut
-
Premium
Determination of anionic surfactants in water by fluorimetric method
Anionic surfactants (A-SAS) represent, by volume, the most important group of surfactants used in cleaning products and the oldest and the largest volume anionic surfactant is soap. In concentrations 0.1 ~ 1.0 mg/L A-SAS become toxic for aquatic environment. Lumex Instruments provides sensitive and selective fluorimetric method for the measurement of mass concentration of anionic surfactants in water samples using the FLUORAT-02 analyzer. The method became the Interstate standard for anionic surfactant in water ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Senix ToughSonic sensors used to measure level of palm oil in tanks
Grown only in the tropics, the oil palm tree produces high-quality oil used primarily for cooking in developing countries. It is also used in food products, detergents, cosmetics and, to a small extent, biofuel. Palm oil is a small ingredient in the U.S. diet, but more than half of all packaged products Americans consume contain palm oil. Oil palms are grown both on large plantations and on small family farms across Asia, Africa, and Latin America. Such rapid expansion comes at the expense of tropical ...
By Senix Corporation based in Hinesburg, VERMONT (USA).
-
Premium
Chemical Water Treatment for membrane treatments
Membrane units, in our days are widely used in the water pre-treatment preparation and are becoming one of the most important technologies in the production of high pure water. Nevertheless they often face problems with scaling and fouling and are therefore limited by frequent maintenance, downtime and high costs. Our treatment programs are specifically designed for membrane units like reverse osmosis, ultra- and nanofiltration and enable to remove or preventive control scaling and fouling. Our main target is to ...
By Kurita Water Industries Ltd based in Tokyo, JAPAN.
-
Premium
Flow Measurement Big Pipe solution for Industry - Power Plants
Application: Pipe DN 2400 made of wrapped GRP. Part filled. Cooling water (seawater) with max. flow rate of 60.00³/h from power plant. ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Gas analyzers from combustion: control emission monitoring
Today different ministerial directives lead the market to follow the industries. There are power stations, incinerators (domestic wastes, mud, hospitals…) cement industry, ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Activated carbons solutions for home water filters industry
As standards of living continue to increase in developed nations, consumers demand higher quality drinking water from their taps. Activated carbon is the time tested solution to meet these challenges. Jacobi offers a full range of products for water treatment from the AquaSorb™ line especially designed for use in home water filtration ...
By Jacobi Group based in Kalmar, SWEDEN.
-
Premium
Discharge measurement for hydrology research
By Sommer Messtechnik based in Koblach, AUSTRIA.
-
Premium
Cement materials for Hot surface ignitors industry
Hot Surface Ignitors | Hot Surface / Spark / Silicon Carbide / Silicon Nitride; Low thermal expansion cement required. Offers refractory properties through 2600°F. Cement required for bonding or potting wire into ceramic body. Able to withstand low voltages during ...
By Sauereisen Inc. based in Pittsburgh, PENNSYLVANIA (USA).
-
Premium
Water treatment solutions for the power generation industry
Power generation industry is one of the greatest consumers of water, whether this is for cooling water applications or boiler feed (demineralized water). Lenntech can provide complete water treatment solutions in for the power generation industry considering a wide range of technologies and ...
By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.
-
Premium
Mixing and Grinding Technology for Food Products
The CleanLine series has been completely redesigned by Eirich to meet the requirements of hygienic applications such as in the food ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Premium
Water monitoring for the environmental industry
By General Oceanics Inc. based in Miami, FLORIDA (USA).
-
Premium
Fully-automated gas chromatographs solutions for stack emissions monitoring sector
Synspec GCs can also be used as continuous emission monitoring systems (CEMS). In general, emissions from stacks are in the higher ranges of concentrations to be measured. Synspec equipment, which is usually geared towards very low detection levels, can be tuned to the concentration ranges that are emitted at your production plant. Depending on the composition of the emissions a sample treatment might be ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Preparation Technologies for Metallurgy
Tailor-made solutions – Effective and trendsetting: Eirich supplies technologies for the economical preparation of raw materials, auxiliary materials and residues for recycling and disposal. The product line includes not only machinery and systems but also a full range of services covering everything from consulting to start-up. ...
By Maschinenfabrik Gustav Eirich GmbH & Co KG based in Hardheim, GERMANY.
-
Premium
Product Recovery Solutions for Food Ingredients
Efficient recovery of active pharmaceutical ingredients(APIs), chemical substances or food powdersafter drying applications such as spray and fluid bed dryingis frequently a problem. The same problem occurs in many milling and micronization applications. The preferred way to recover these sensitive products is with cyclone collectors due to their direct powder capture. Unlike bag filters or wet scrubbers, cyclones minimize filter or product contamination and product cross contamination and can easily handle a wide ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Static and rotary torque sensors solutions for marine & shipping - vessel monitoring industry
Datum Electronics are a world leader in the supply of Marine Torsion meters and Shaft Power Meters which measure both the static and dynamic on-shaft torque and shaft power of drive shafts, propeller shafts, intermediate shafts, and generator shafts. Datum Electronics have both permanent and temporary Marine Torsion meters and shaft power meters which are highly adaptable and offer a range of outputs to suit your requirements. ...
By Datum Electronics Ltd based in East Cowes, UNITED KINGDOM.
-
Premium
Measurements Solutions for New Space Optics
New Space Optics – Observe the Earth like never before with Zygo. Explore the earth with unmatched vision. ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Air pollution, emission and process monitoring systems for incineration
ENVEA’s long association with the Incineration Industry includes supporting Process Operators to meet environmental obligations and the requirement for high performance instrumentation with quality assurance features for compliance reporting. In addition to the importance of regulatory compliance, the control and treatment of emissions from Incineration processes represents a significant proportion of overall costs, therefore, quality data from emissions and process monitoring provides valuable feedback on ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Machineries for cardboard recycling
The need for of shredding cardboard is as diverse as the product. There is cardstock, fine flute and single and multi-wall corrugated of all shapes and sizes. Shred-Tech® has provided cardboard systems for destruction of out of spec packaging, increasing of bulk density for reduced disposal costs and conditioning for further processing into a product such as building insulation. Various methods of material handling have been utilized such as conveyors and air-vey ...
By 3R-Machinery (by Shred-Tech) based in Raleigh, NORTH CAROLINA (USA).
-
Premium
Motion control solutions for the pulp & paper industry
Motion control solutions for the pulp & paper ...
By Hilliard Corporation based in Elmira, NEW YORK (USA).
-
Premium
Temperature and gas sensing solutions products for industrial electronics
Optimize performance, boost functionality, and decrease costs. Industrial electronics require high power quality thanks to equipment and process control sensitivity (e.g., factory automation equipment, semiconductor processing, etc.). As a power system designer, you're faced with changing safety regulations, greater performance and functionality demands, increased costs, and size reduction ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you