Applications available in Ohio

  • Premium

    Odor control for rubber and plastic

    From process to product, we remove odors from rubber and plastic. Malodors, whether connected to the process or embedded within the end product, are an inherent concern associated with manufacturing polymers. Fortunately, OMI Industries has a versatile solution that’s proven to work within the plastics and rubber industries. Ecosorb odor neutralizing products feature a proprietary, natural and environmentally safe formulation that’s fast acting and effective at removing detrimental polymer odors...

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Process cooling and industrial comfort applications solutions for plastic and rubber industry

    For this specific chiller applications which includes injection moulding , recycling, film blowing, extrusion, thermoforming and other applications HITEMA is able to grant high unit reliability and the cooling temperature control to achieve the targets of production capacity with also the aim to reduce the duration of production cycles and for energy and maintenance costs reduction.

    By Hitema International based in Bovolenta Padua, ITALY.

  • Premium

    Plastic sorting for the plastics industry

    REDWAVE is a flexible system with applications in a variety of fields, especially for the plastics industry. No matter how complex the sorting task may be the REDWAVE range of sorting equipment can achieve high levels of purity. REDWAVE guarantees high waste throughput with effective recovery of required materials, achieving maximum return on the separated commodities.

    By REDWAVE a division of BT-Wolfgang Binder GmbH based in Gleisdorf, AUSTRIA.

  • Premium

    Waste sorting solutions for the upgrading plastics industry

    Using innovative systems, TOMRA Sorting enables you to reliably produce high quality yield, leading to higher profitability and greater ROI.

    By TOMRA Sorting GmbH. based in Mülheim-Kärlich, GERMANY.

  • Premium

    Recycling Equipment for Plastics Industry

    Shredders for Plastics Scrap Size Reduction. Low cost alternatives for your waste plastics recycling equipments. Shredders for Plastic Scrap and E-scrap. Harden Machinery supplies single shaft and two/four shaft shear shredders for plastic scrap recycling and other solid waste size reduction applications. All of our machine are made in Chine with European design and Chinese cost. Our machines are being used in China and around the world.

    By Harden Shredder Machinery Ltd. based in Zhongshan City, CHINA.

  • Premium

    Recycling equipments for shredding industrial plastics

    Plastics are one of the most commonly recycled materials today. Granutech’s Saturn Shredders are designed to process a wide range of plastic materials, from films to pipe. Our high performance shredders use low to mid-range speed, and high torque to efficiently cut the plastic materials while preventing melting during processing. Custom blade sizes and configurations offer precise sizing and produce materials ready for downstream processing. Our systems can integrate grinders and granulators to complete...

    By Granutech-Saturn Systems based in Grand Prairie, TEXAS (USA).

  • Premium

    Laboratory instruments solutions for polymer and plastics industry

    Synthetic polymers and plastics are a mainstay of modern life. Because of their versatility and physical properties, plastics and polymers have conquered nearly every aspect of human activity: airplanes and cars, packaging of all kinds, medical devices and products, electronics, and countless more – without high-quality and high-tech plastics most products we use today in everyday life would look very different. Polymer production is a demanding process in which high-purity raw materials undergo complex...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Process analyzers & instruments for plastics

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA).

  • Plastics shredding

    By AWC Engineering Ltd based in Stalybridge, UNITED KINGDOM.

  • Pumping solutions for plastics

    Fluids Handled - Reactor Discharge and Transfer Applications for Monomers, Polymers. Resins and Styrene Monomer injection.

    By Hydro Prokav Pumps (India) Pvt. Ltd. based in Sidco, INDIA.

  • Dry bulk material processing for the plastic industry

    Over the years, plastics have become the most dominant engineering material for most products. All plastics are polymers; these polymers are further divided into two basic types: thermoplastics and thermosets. Extrusion can be used for thermoplastics. The raw material is in the form of pellets, granules, or powder. Meyer rotary valves are designed and engineered for dependable and reliable performance. The precision-engineered housing and rotor prevent material from getting jammed or sheared.

    By Wm. W. Meyer & Sons, Inc. based in Libertyville, ILLINOIS (USA).

  • MEASURING HYDROXYL (OH) VALUES OF POLYOLS USING FT-NIR SPECTROSCOPY

    Recently, FT-NIR spectroscopy has been accepted as a rapid and accurate technique for determination of hydroxyl value of polyols. ASTM D6342-12 defines a method for measuring hydroxyl content of several materials. Using Galaxy Scientific's QuasIR series FT-NIR spectrometers, hydroxyl determination takes typically less than 1 minute per sample and requires no solvents, no reagents, and no columns or other consumables. The analysis does not even need to be performed in a lab or by a chemist, freeing them up for...

    By Galaxy Scientific based in NEW HAMPSHIRE (USA).

  • Industrial shredders system for plastic shredding sector

    Plastic is a versatile material. Characteristics range from tough polymer structures to extra-firm high-tech materials. Efficient size reduction requires experience and know-how. We are able to customise our machine designs to be suit your requirements, for example; process configuration, footprint and throughput, thereby creating the optimum solution.

    By WEIMA based in Ilsfeld, GERMANY.

  • Dominator despackaging machines for Plastics containers and bottles industry

    Depackage and separate plastic containers and bottles from their contents using the Dominator depackaging equipment. Recovered liquids or products can then either be pumped to a holding tank or conveyed into a bin for further processing. Recovered plastics can then either be sent for recycling or sent for reprocessing. Packaged microwave meals, plastic water bottles, fruit juice drinks, HDPE containers, liquid paperboard, polymer bottles can all be depackaged successfully.

    By Rowan Food and Biomass Engineering Ltd based in Gloucestershire, UNITED KINGDOM.

  • Plastic Fabrication

    Custom polyethylene tanks and storage

    By Protank Ltd based in Olive Branch, MISSISSIPPI (USA).

  • Recycling of Plastic

    For the recycling of plastic we offer a wide range of solutions:shredding, separation, granulating , cleaning , extruding.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • EDXRF spectrometers for plastic, polymers & rubber industry

    Plastics, polymers and rubber are combined with a variety of different additives in order to give them properties that are important for many different markets. These products are commonly analyzed as beads, which in their end form are pressed or molded into plaques.

    By Xenemetrix Ltd. based in Migdal Haemek, ISRAEL.

  • Industrial briquette presses for plastic briquetting

    There is no such thing as “just waste”. Business leaders are well aware that even the smallest parts of production waste have a value. By pressing foamed plastic for instance, the waste volume can be compressed at a rate of 30:1 saving storage space, disposal and transportation costs.

    By WEIMA based in Ilsfeld, GERMANY.

  • Ice blasting technology for plastics

    Applications of Coulson Ice Blast in the Plastics sector: Ice General Mold and Tool cleaning Injections Molds Compression Molds Blow Molds Urethane Molds and Overspill Plate out and off-gasing Textured Molds and Embossing cooling rolls Thermoform Molds Extrusion dies Plastic injection Screws Clamshell aluminum molds for urethane foam Enhanced ice Removing Rust Removing paint High temperature pods

    By Coulson Ice Blast based in Port Alberni, BRITISH COLUMBIA (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you