health and safety Applications available in South Dakota
-
Premium
Particulate matter monitoring at CHPG in Monaco
As part of the construction of a new hospital complex on the site of the Princess Grace Hospital (CHPG) in Monaco, more than a hundred Ecomesure stations have been deployed to monitor fine particles inside and outside CHPG. The challenge is to ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Direct atomic absorption mercury determination in foodstuff and mixed feed
Direct atomic absorption mercury determination (without any pre-treatment procedures) in food is complicated by its organics matrix. That is the reason why almost all AAS methods of mercury determination in foodstuff include sample digestion by ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Gas monitoring instruments and systems for confined space monitoring sector
to your employees’ health and safety. Gasmet gives you peace of mind with a solution for ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Fully-automated gas chromatographs solutions for worker safety monitoring sector
. With Synspec analysers you can set alarms at prescribed threshold values and stay away from health risks. ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Gas leak detector for First responders
Second Sight MS is deployed in the event of an accident to detect a gas leak at a long distance and prevent first responders from going into the field without knowing what they are ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Erosion and dust control solutions for fire access roads sector
Fire access roads are required are on most construction sites. The psi requirement for a 80,000 lb Heavy Fire Truck & H-20 loading is 110 PSI. With the use of our Envirotac line of polymers you will achieve much greater than the max PSI amount required at a fraction of the cost of building a fire access road with traditional ...
By Environmental Products & Applications, Inc. based in La Quinta, CALIFORNIA (USA).
-
Premium
Industrial hygiene - personnel safety gas analyzers for industrial air monitoring
Industrial companies produce during there manufacturing process toxic compounds such as Benzene or H2S. CHROMATOTEC analysers are able to monitor such compounds. For this kind of applications we generally find ranges of 0.1 to 10 ppm. The corresponding analysers for these applications are the chromaFID and the chromaPID, according to technical specifications (gas to be analysed, environment of the analysis, concentration ...
By Chromatotec Group based in Val de Virvée, FRANCE.
-
Premium
Gas analyzers and monitoring systems for fire & material testing
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Portable Light and Ruggedized Bio-Air Sampler for Homeland Security
Coriolis RECON, a portable, light and ruggedized bio-air sampler, collects biological warfare agents in the air for bio surveillance ...
By Bertin Technologies based in Montigny-le-Bretonneux, FRANCE.
-
Premium
Gas detection for fire applications
In order to adequately face the challenges that a firefighter faces on a daily basis one should understand the importance of detecting the harmful gases present, in order to be alerted to danger and to ensure the correct precautions are taken to prevent exposure. Understanding the different types of gases and the dangers that they can pose to people is the first step in choosing the correct form of gas detection. Even the most common gases, such as oxygen and nitrogen, can have devastating effects if present at ...
By Teledyne Gas and Flame Detection based in Arras Cedex, FRANCE.
-
Premium
Cleanroom Solutions from Concept Smoke Systems
The correct functioning of HEPA filters is normally tested at the time of installation, as well as part of the routine maintenance programme. It is normally recommended that HEPA filters are checked at 14 month intervals or less, or immediately after filter changing. Where high efficiency filters are fitted, it is vital that the filter housing/sealing device does not allow particulate material to pass and thereby compromise the cleanroom environment that is being served. Testing is necessary since HEPA filters can ...
By Concept Smoke Systems | Concept Engineering Ltd. based in Maidenhead, UNITED KINGDOM.
-
Premium
Emission control solutions for general dedusting sector
Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters. When filters have to be used to increase capture efficiency, ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Borescope for Rifle and Shotgun Inspection
Cleaning and maintaining the barrel is a critical part of caring for any firearm, ensuring safe and accurate long-term use. Rigid borescopes are a valuable tool for inspecting not only the barrel but just about any hard to visualize places on a firearm. All you need is a space large enough to insert the lens into. Borescopes for rifle and shotgun inspections are relatively easy to use and allow you real-time visualization; cameras can also be attached to the borescope to take pictures or record video during visual ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Gas monitoring instruments and systems for flavoring agents
Manufacturing of powdered and liquid flavorings and fragrances involves production phases where flavoring chemicals may be released into the ambient air breathed by workers. Exposure control by gas analyzers in the production rooms and laboratories is necessary to ensure that the Time-Weighted Average (TWA) concentrations do not exceed the maximum Permissible Emission Limit (PEL) ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Pulsed Wind Lidar for Bridge Structure Analysis
Applications in Scientific Research • Wind Engineering Research • Wind Structure Characteristics Analysis • Data Calibration for Satellite Wind Data • Wind Field Analysis for Space Launch and Landing • Atmospheric Dynamics and Climate ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Disposable formwork for acoustic insulation sector
With the help of Iglù a noise control mechanism is implemented that makes it possible to increase the level of comfort in homes. ...
By Daliform Group Srl based in Gorgo al Monticano (TV), ITALY.
-
Premium
Air sampling & monitoring systems for occupational health & safety industry
HI-Q considers the responsibility for worker health and safety to be of paramount ...
By HI-Q Environmental Products Company, Inc. based in San Diego, CALIFORNIA (USA).
-
Premium
Ozone generators for pest control application
the safety of ...
By Absolute Ozone® based in Edmonton, ALBERTA (CANADA).
-
Premium
Biological Enzyme for Tanker Spill
By OSEI - Oil Spill Eater International, Corp based in Dallas, TEXAS (USA).
-
Premium
Automatic Hydraulic Valves and Water Control Systems for Fire Protection Industry
Electric deluge valves, pneumatic deluge valves, pressure reducing, pressure relief, cavitation solution, tecnidro engineering, certifications and ...
By Tecnidro Srl based in Genova (GE), ITALY.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you