Chlorine dioxide for industrial water treatment
Chlorine dioxide is used as a biocide in many industrial water treatment applications including cooling towers, process water and mill water. Its selective oxidative properties usually results in lower dosages of ClO2 while also achieving improved microbial performance.
Chlorine dioxide controls odor in two ways: by controlling microorganisms that form odor-causing hydrogen sulfide and by destroying hydrogen sulfide odors through chemical oxidation. Using an odor scrubber, chlorine dioxide solutions may be added directly to water containing the odorous compounds.
Odor Scrubbers & Cooling Towers
Cooling towers are a prime environment for the build up of microorganisms. Maintaining control of this build up is essential for efficient operation of the cooling loop. This can be successfully achieved with the use of chlorine dioxide. The microorganisms build slime layers and other colonies which can result in several serious problems: increased deposits, build up of odors and slime due to the adhesive nature of the biofilm layer, loss of heat transfer due to the insulating nature of inorganic deposits, increased corrosion rates due to “under deposit corrosion” and increased consumption of power due to the restriction by the deposition. The injection of chlorine dioxide into the recirculation of the cooling towers alleviates these issues and also causes less wear and tear on the equipment.
Chlorine dioxide is widely used for bleaching pulp. It is also a very effective biocide to control process water and waste water environmental issues associated with mill and process water. Because ClO2 has unique biocidal properties, it can also be used effectively as a disinfectant, algaecide and oxidizer in influent process waters and waste waters.
Acting as a wet end slimicide, the benefits of chlorine dioxide include highly cost-effective microbiological control, extended run ability of paper machines, lower corrosion rates on machine metallurgy, reduced boil-out frequency of stock chests, and highly cost-effective microbiological control.
CIP Sanitizer (Clean-In Place Sanitizer)
For CIP applications, water is injected directly into a facility’s fluid distribution network and circulated for a set duration of time. Compared to traditional chlorine chemicals or hot water, overall chemical costs are reduced, sewage disposal costs are lowered or eliminated, and system deterioration is diminished.