Only show results in Virginia? Ok

Applications

  • Premium

    Water Testing for Textile Manufacturing

    The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

    By Myron L Company based in Carlsbad, CALIFORNIA (USA).

  • Premium

    Ozone Water Treatment for Textile Wastewater Treatment Industry

    Wastewater that is discharged by dye manufacturing and textile finishing industries has become an environmental concern. The legal requirements concerning discharge of contaminated waste water are reinforced in many countries and the discharge fees are increasing. According to our experience large international clothes companies are setting a new standard of requirements, often higher than the local legislation requires.

    By Primozone Production AB based in Löddeköpinge, SWEDEN.

  • Premium

    Evaporators and concentrators for laundries

    Colouring steam concentration, treatment of the washing waters.

    By Eco-Techno s.r.l Vacuum Evaporation System based in Busnago MB, ITALY.

  • Premium

    On-site chlorine and sodium hypochlorite generation systems for the Textile industry

    Klorigen™ systems generate sodium hypochlorite at the same high quality and 10-15% concentration levels as available from bulk commercial suppliers.

    By Electrolytic Technologies Systems LLC based in North Miami Beach, FLORIDA (USA).

  • Premium

    Cleaners for Textiles industry

    There are many cleaning applications in textile manufacturing and industrial textile laundering. In textile factories, manufacturing equipment, accessories, water recycling system filters, and wastewater filters must all be cleaned and maintained in order to keep the plant running efficiently. Minimizing downtime, by using the safest, most economical and environmentally friendly products that clean effectively, is critical. Returning filter system flux rates back to 100% is also important and can be accomplished...

    By International Products Corporation based in Burlington, NEW JERSEY (USA).

  • Premium

    Wastewater treatment for the textile industry

    A reduction in the Biochemical Oxygen Demand BOD5, produced in the bleaching, washing and dying processes for textiles.

    By Toro Equipment S.L. based in La Cistérniga, SPAIN.

  • Premium

    Anaerobic water purification systems for textile and tanneries

    Textile wastewater typically has high pH, high organic pollution, high salt concentration (in most cases sulphate), toxicity and colour. The composition of the wastewater varies per production process: desizing, scouring, dyeing and finishing produce completely different wastewater qualities.

    By Paques B.V. based in EL Balk, NETHERLANDS.

  • Plastics & textile shredding

    SSI manufactures a variety of low-speed, high-torque 1, 2 and 4-shaft shredders specially suited for size reduction of plastics and textiles. SSI has many shredders installed in plastic processing applications ahead of granulators to downsize bulky, difficult to manage or compressible materials before additional processing and recycling. We also have many shredders employed converting plastic materials into usable fuel sources for industry.

    By SSI Shredding Systems, Inc. based in Wilsonville, OREGON (USA).

  • Effluent filtration in textile industry

    To separate solids from liquids, nonwoven or woven fabrics out of animal or vegetable fibers are used, and synthetic fibers are now in use since several decades. In cross-flow filtration the filtrate is recuperated transversely to flow direction through a porous wall layer. In classic filtration, a filter cake is built up on filter surface and this cake reduce the flow of filtrate which will depend of the cake permeability. Often it needs such a cake structure build-up in order to obtain a clear filtrate. The...

    By Bucher Unipektin AG based in Niederweningen, SWITZERLAND.

  • Water quality monitoring for textile industry

    Wastewater from a textile facility contains a variety of dyes and organic chemicals from the manufacturing processes that are often difficult to treat. Spectral analysis is well suited for monitoring waste streams to identify problematic dyes prior to treatment. Continuous monitoring of effluent wastewater for BOD and COD helps to ensure effective treatment and quality of effluent to ensure regulatory goals are met prior to discharge.

    By Real Tech Inc. based in Whitby, ONTARIO (CANADA).

  • Recycling Solutions for the nonwoven and textile industry

    ANDRITZ provides state-of-the-art nonwoven technology and textile technology for a great variety of applications. ANDRITZ supplies technologies for the nonwovens industry from forming to finishing as well as textile calenders. ANDRITZ combines the expertise of three leaders in the nonwovens and textile industries with long-standing and successful traditions: Asselin-Thibeau, Küsters, and Perfojet. The key competences lie in needlepunch, spunlace, wetlaid, wetlace, spunbond, spunjet, and finishing technologies....

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

  • Balers and compactor solutions for textile industry

    Second-hand clothes can be compacted into bales for transport, as well as fabrics like cut-off.

    By Bramidan Balers based in Bramming, DENMARK.

  • Filter technique solutions for the textile industry

    Treatment of wash bath and colour bath, treatment of process water, cleaning waste water.

    By KLASS-Filter GmbH based in Türkenfeld, GERMANY.

  • X-ray Photoelectron Spectroscopy for Coatings & Thin Film

    Surface coatings and thin films are of great commercial importance in many industries and are used to enhance or provide required properties to bulk materials specific to their applications. Thin films can range from tens of Angstroms to several microns in thickness and find application in areas as diverse as optical anti-reflective coatings, architectural glazing and drug eluting thin films in the pharmaceutical industry. X-ray photoelectron spectroscopy (XPS) is ideally suited to characterising the surface...

    By Kratos Analytical Ltd. based in Wharfside, UNITED KINGDOM.

  • Wastewater treatment for the textile sector

    The kind of waste water from tanneries has a high salt content that can be diluted, but is hard to eliminate. They can also have a high organic load due to the high dirtiness, including blood, sand and manure. The water itself from these industries can vary a lot from a company to another depending on its actividad. However, a common characteristic is the high content of materials in suspension due to fibres and precipitated proteins.

    By Aguambiente based in La Cistérniga, SPAIN.

  • Air pollution control for the textiles industry

    Companies that use solvent based inks, dies, or coatings in the textile manufacturing process – commonly incorporate from filtration systems in the control plan.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Workwear & protective fabrics for defence industry

    Where protection from flash fire & IEDs is required, Arvind PRO1 products can help Saveprecious human lives. Improvised Explosive Devices expose soldiers to extra risks of injury due to flash fire and extreme heat exposure. Although outer garments may be flame resistant, wearing the appropriate FR Cotton inner garments as well, can help save a soldier’s life.

    By Arvind Limited based in Dist : Gandhinagar, INDIA.

  • Shredding solutions for textile and carpets industry

    All those textile materials (derived from natural or synthetic fibers) arrived at the end of the cycle, carpeting and rugs are shredded and used inside the mix of materials composing the RDF or SRF. The operation can be carried out in two or in one single stage. A two-stage process (volume reduction with two-shaft shredders and subsequent refinement of the final size of the material with single-, three- or four-shaft shredders) will grant a higher production and energy saving (in proportion) while, if processed...

    By SatrindTech Srl based in Arluno, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you