1,2-dioxin Applications

42 Results found
Only show results available in Virginia?
OK
  • Keyword: 1,2-dioxin ×

Dioxins and furans

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

CTP's expertise in catalytic, adsorptive and regenerative thermal oxidation technology in nano gram purification makes it the best partner for these hazardous industrial processes.

Waste recovery for organic wastes e.g. PCBs & Dioxins

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

Tetronics` technology destroys organic wastes including Polychlorinated Biphenyls (PCBs) and other types of Persistent, Bio‐accumulative, and Toxic (PBT) pollutants at very high efficiencies across a wide range of concentrations.

Air cleaning system for the K-12 education

by Dynamic Air Quality Solutions     based in Princeton, NEW JERSEY (USA)

The grades are in: a 2006 national report,Greening America’s Schools, concluded that environmentally friendly school buildings lead to lower operating costs, improved test scores, and enhanced student health. The report, produced by Capital E and co-sponsored by The American Institute of Architects (AIA), concluded that environmentally friendly schools save an average of $100,000 each year. The study examined 30 green schools built between 2001 and 2006, and determined that the total financial benefits of green schools are 20 times greater than their initial cost difference. Measurable benefits include energy and water savings, improved student health and higher test scores.

Chlorinated hydrocarbons

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

The hazardous chlorinated hydrocarbons are completely destroyed without residue. There is no generation of hazardous by-products, e.g. dioxins.

Hazardous waste treatment solutions for site remediation

by econ industries GmbH     based in Starnberg, GERMANY

The contamination of soils as a result of prior chemical production can often be unpredictable and diverse. The majority of such pollutants will require an ex-situ treatment method. Many of our VacuDry units can be used for direct-feeding contaminated soils. To reduce the input amount for thermal treatment, the VacuDry units can also be used in combination with soil-washing plants: In this case, customers only feed the high polluted fractions and screened fines (e.g. below 10 mm), as well as the filter-cake from the soil washing process. However, we are able to handle soil contaminated with mercury, hydrocarbons, PAH, PCB, dioxins, furans, organic-lead compounds and many more. VacuDry plants for on-site ex-situ remediation projects are delivered in a modular design.

Applications and Air Pollutants Removed in Hazardous, Solid and Liquid Waste Treatment Operations

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Venturi scrubbers with FORCE FLUX Condensation technology and Wet Electrostatic Precipitators for industrial, municipal, sewage sludge and pathological waste incinerators to remove micron, submicron particulate, heavy metals and acid gases. Special quencher/scrubber systems for dioxin removal. HCL scrubbing from PVC plastic waste burning. Fine particulate, acid gases and NOx removal on munitions destruction. Cleanup of all pollutants from liquid waste incinerators and other high temperature destruction processes. Acid and particulate emissions from electronic board and metals recovery operations.

Iron and Steel

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

Waste recovery for energy & utilities

by Tetronics (International) Limited     based in Swindon, UNITED KINGDOM

In order to stay competitive and to be seen as being environmentally responsible, energy and utility companies are always looking for alternative routes to generate power. One method of doing this is by leveraging waste to energy incineration plants linked to the processing municipal solid waste. During this incineration process, APC residues, which are a mixture of fly ash, organic pollutants (including dioxins and furans), are generated and are classified as hazardous waste and have a detrimental environmental impact. This fly ash is subject to Air Pollution Control as it is contaminated with extremely high concentrations of heavy metals and toxic compounds like dioxins, linked to cancer and other health problems. Tetronics offers valuable waste recovery plants that can eliminate the hazardous element within the fly ash while generating an inert building aggregate with the remaining material.

Recycling Systems for the paper industry

by Macpresse Europa S.R.L     based in Vernate, ITALY

MACPRESSE produces special machines for the paper industry, automatic presses with an hourly output of between 3 and 60 tons per hour as well as other ancillary equipment.

Ozone/UV systems for Industrial, municipal, and residential wastewater treatment

by Lifetech     based in Brno, CZECH REPUBLIC

In 2004-2005 LIFETECH`s laboratory worked out an advanced oxidation process (AOP) for removal of dioxins and furans (PCDD/F), chlorophenols and other contaminants from the BCD process wastewater. Consequently, our technology was installed and from April 2006 successfully used in the `Spolana-Dioxins` Project at SPOLANA a.s. in Neratovice, Czech Republic, as a part of Special Wastewater Treatment Plant. Our supply consisted of an ozone generator with the output of 5 kg O3/h at 10% w/w ozone concentration, two reaction tanks with mixing systems, a vent ozone destructor, and a control system. The world largest project for removal of PCDD/F was managed by BCD CZ a.s., a subsidiary of Thermal and Chemical Soil Remediation Ltd.

Nitrogen mass flow meters flow for solutions

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Sierra specializes in accurate mass flow measurement and/or control of Nitorgen gas. One of the most commonly measured gases, applications are found across numerous industries ranging from general process control to scientific research and development.

Flow meters solutions for Aerospace sector

by Sierra Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Our flow instrumentation has been on numerous space shuttles and is currently on the International Space Station. Our high pressure mass flow controllers are used extensively in the development of advanced composites for aerospace.

Industrial air pollution control for the recycling and waste management

by Chemisch Thermische Prozesstechnik GmbH / CTP Air Pollution Control     based in Graz, AUSTRIA

Due to the continuous rise in the waste volumes worldwide it is essential constantly to seek alternatives to landfills and waste incineration: one suitable approach is bio-mechanical waste treatment. Apart from waste management, applications for air purification systems in this field range from soil remediation to sewage sludge drying in waste water treatment, as well as to the recycling of resources and their possible re-introduction.

Water treatment chemicals for the chemical and pharmaceutical industry

by Kurita     based in Ludwigshafen, GERMANY

Resource consumption in the chemical industry is enormous. Although the industry has already succeeded in significantly reducing its energy demands, it remains challenged by high energy costs, high water consumption and increasingly stringent regulations. Energy efficiency, increased production and plant availability are therefore important factors contributing to a competitive advantage. We would be glad to support you. Kurita offers a broad spectrum of resource-saving solutions as well as solutions for improving production and plant safety.

Reduced Fat Interference with Analysis of Pesticides in Avocados

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

QuEChERS (Quick, Easy, Cheap, Effective, Rugged, Safe) is a very popular method for the extraction and cleanup of fruit and vegetable samples for pesticide residue analysis.2-4 The extraction step uses acetonitrile and a salting out effect (with MgSO4). Cleanup is then accomplished using dispersive SPE (dSPE) followed by a centrifuge step prior to analysis. This application shows the clean-up and analysis using Supel™ QuE Z-Sep+ QuEChERS and an SLB®-5ms GC column.

Reliable Shredding Technology for Residual Timber Utilization

by UNTHA Shredding Technology     based in Kuchl, AUSTRIA

Our reliable wood shredders ensure the production of a homogeneous granulate for your in-house wood chip furnace, biogas plant, biomass co-generation plant and also the production of wood briquettes. Regardless of how you are planning to use the wood chips, we will configure the wood shredder exactly according to your needs. We offer you a large selection of wood shredders with various working widths, rotor diameters and drive capacities. The possible granulate sizes usually range from 12 to 80 mm. Regardless of whether you need a compact, small system or have specific needs, we will always find the right solution for you! Capitalize on our reliability! We provide a 3 year carefree warranty on all our UNTHA wood shredders.

Radiation monitoring instruments for the Nuclear power industry

by Technical Associates     based in Canoga Park, CALIFORNIA (USA)

Air-stack-liquid effluent for PWR and BWR Nuclear Power Plants.

Improved Recovery of the Fungicide Carbendazim

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Fungicide carbendazim can some times be used to combat mold on citrus fruits including oranges. Recently, low residue levels of the fungicide were reported to be present in the bulk orange juice import shipments to the USA. Because this compound can persist through processing steps and may be found in the final consumer product, many government agencies have established maximum residue limits (MRLs) to ensure the safety of their population. Presented here is a single method, involving fast and effective QuEChERS cleanup, suitable for various orange juice matrices. The choice of PSA/C18 sorbents reduced interferences, resulting in greater recoveries and less ion-suppression. Because the QuEChERS method is fast, it only adds a few minutes to the sample preparation procedure. Sample processing using QuEChERS with PSA/C18 allows analysts to accurately process various matrices in a single workflow, with very little additional sample preparation time.

Analysis of Isocyanates Using the ASSET™ EZ4-NCO Dry Sampler

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

Isocyanates are used as a raw material to produce a number of products . Personal exposure can occur while the products made with isocyanates are being applied, or when the materials are removed by grinding or thermal degradation. Workers who are exposed to these compounds are at risk for respiratory disorders and asthma. The highly reactive nature of the isocyanate compounds and the low occupational exposure limits put high demands on both sampling and analytical techniques for monitoring of isocyanates in air. We investigated the performance of the LC-MS and LC-MS-MS methods in the analysis of isocyanates using the new ASSET™ EZ4-NCO Dry Sampler. We found that the analytical method can successfully reach the quantitation limit for most isocyanates of 5 ng/mL in the final sample when LC-MS-MS analysis was used and the quantitation limit of 10 ng/mL when LC-MS analysis was used. All 11 compounds were well-resolved chromatographically using a 15 cm Ascentis Express C18 column.

Related Terms for 1,2-dioxin

Need help finding the right suppliers?

Let the XPRTs do the work for you