Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.
International Products Corporation has been selling cleaners to the filter membrane industry for over 30 years. Our proprietary formulated cleaners work effectively at restoring 100% flux at safe pH ranges. We have a wide variety of chemistries available for all membranes and soils and an on-site R&D laboratory that offers technical support and assistance. All of our cleaners are free of solvents, phosphates, silicates, phenols, and Substances of Very High Concern.
IPC’s cleaners are used throughout the oil and gas industry for cleaning equipment and filter membranes. They are excellent alternatives to hazardous, solvent based degreasers. Our cleaners remove oils and greases, sludge, mud, cutting fluids, flux, and petroleum residues. Clean equipment helps to ensure that operations run smoothly and efficiently.
Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven in cleaning applications ranging from mixing tanks, processing equipment and fluid lines to labware, general maintenance, and filter membrane cleaning. Our products remove protein, starch, fat, gum, oil, grease, and baked on soils. All of our cleaners are NSF registered, USDA-A1 cleaners and can be validated in FDA cleaning processes. Validation methods and health and safety data are available...
We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from stamped metal, parts and equipment without the hazards associated with solvents. Our cleaners are also proven in removing soils from filter membranes used in wastewater treatment systems.
Ceramic membranes are widely applied in a number of industrial water treatment applications. for example as pre-treatment to reverse osmosis or nano filtration. Using our new generation ceramic membranes will enable a durability which provides limited maintenance and an operating life which is expected to exceed 20 years. Moreover, it enables filtration of fluids where organic and other ceramic membrane fall short, such as presence of caustics, solvents, polymers, oxidants and strong acids.
Effective cleaning of machined or formed parts is a key step in all manufacturing processes. At IPC, we understand for a surface to be successfully plated or painted, it must first be free of contaminants. Our cleaners remove dirt, cutting oil, metal fines, flux, and other particulates from stamped metal and precision parts without the hazards associated with solvents. An economical 1-2% concentration in water is effective for most cleaning applications. Our cleaners are also proven in removing soils from filter...
IPC offers a full line of precision cleaners that provide consistent results with every use and leave surfaces completely clean. An economical 1-2% concentration in water is effective in most cleaning applications. Typical uses include removing protein, starch, grease, fat, gum, oil and baked on soil from processing equipment, lines, and filter membranes.
Our cleaners are used in the manufacture of semiconductors, flat panel displays, CDs, DVDs, and many other electronic items. They remove emulsions, particulates, oil, organic and inorganic contaminants from quartz, wafers, glass, silicon, ceramics, and metals. When rinsed properly our products leave absolutely no residue. They are also proven in removing soils from filter membranes used in wastewater treatment systems.
We understand how critical it is to get the industrial cleaning done so your plant can continue operating at peak efficiency. Our cleaners remove dirt, grease, oil, metal fines, flux, and other particulates from parts and equipment without the hazards associated with solvents. When rinsed properly our cleaners leave no residue and your precision parts are ready for further processing. Products are available for manual and automated cleaning systems. only qualitative production for all transportAn economical 1-2%...
Our precision cleaners provide consistent results with every use and leave surfaces completely clean. They have been proven effective in critical cleaning applications including mixing tanks, tablet presses, fluid lines, batch process tanks, filter membranes, and other equipment. An economical 1-2% concentration in water is effective in removing gels, emulsifiers, oils, titanium dioxides, dyes, silicons, fragrances, petrolatum, paraffins, insoluble salts, oxides, blood and proteins.
With environmental regulations becoming more stringent, and the link between re-injected water quality and operational costs becoming clear to operators, investing early in advanced water treatment solutions for produced water for both reinjection applications and environmental discharges is now a top priority for operators worldwide. atg UV Technology have provided a number of specialist UV packages for the disinfection of Produced Water in order to reduce microorganisms such as SRB’s (Sulphate Reducing...
Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers....
Three Steps of CEMS:
1st Step: Gas Sampling
2nd Step: Gas conditioning and treatment
3rd Step: Measurement/Calibration
In first step, the function is to get sample gas and forward to 2nd step for treatment. During this step, it cannot block the probes and cannot result condensation of moisture. So a filter online back flushing should be equipped in this part.
The filters to be used: 1, Filter is used to ensure the stability of system and reduce the maintenance
2, Filtration Grade: usually 2 or 3 micron