acidic water Applications

The textile manufacturing industry encompasses many and diverse processes that rely heavily on the use of water, energy, chemicals, and other resources. Wet spinning, sizing, desizing, scouring, bleaching, mercerization, dyeing and printing are just a few. Monitoring and controlling the pH, TDS/Conductivity/Salt Concentration, ORP (REDOX), and Temperature of the aqueous solutions used in these processes conserves costly resources, controls quality, and reduces the amount of pollution that must be treated before...

By Myron L Company based in Carlsbad, CALIFORNIA (USA).

Deposits in water systems, especially in heat exchangers, result in a significant heat transfer reduction, in low efficiency and a loss of cooling capacity. Some systems, after long operational periods without any water conditioning or with inadequate treatment, need cleaning. Therefore Kurita Water Solutions proposes acidic, alkaline and neutral cleaners to remove deposits, scale, fouling, dirt, grime or impurities.

By Kurita based in Tokyo, JAPAN.

Our safe tank vessels are independently designed for each project and to the requirements required by th engineer. Chemicals we design HDLPE & XLPE (HDXLPE) vessels for include: Acetic Acid, Aluminum Sulfate, Ammonium Sulfate, Calcium Chloride, Ethylene Glycol, Ferric Chloride, Ferric Sulfate, Ferrous Sulfate, Hydrochloric Acid, Hydrofluoric Acid, Hydrofluosilicic Acid, Hydrogen Peroxide, Magnesium Chloride, Phosphoric Acid, Polymers (Deposition), Potassium Hydroxide, Sodium Hypochlorite, Sulfuric Acid, Surfactants...

By Sierra Sales Double Wall Plastic Tanks based in Perkasie, PENNSYLVANIA (USA).

The zinc chloride is to be removed from pickling acid at 6N concentration. Under these conditions, the ZnCl2 will form a stable complex and may be removed by PuriTech`s ION-IX technology using an anion resin. The resin is then eluted with water.

By PuriTech Ltd based in Herentals, BELGIUM.

Today’s food and beverages (F&B) are much more than just simple "organic fuels" needed for survival. Beyond their nutritive value, they are consumed for their taste or flavor. Increasingly, they are also a source for maintaining health and enhancing our well-being via high-quality nutrition. At the same time, with an ever-increasing number of processed foods, food quality and safety aspects are becoming more important. All the more because foods are highly complex materials – prone to degradation...

By Metrohm AG based in Herisau, SWITZERLAND.

Consistent ultrapure water (UPW) production is critical for microelectronics manufacturing. SUEZ helps protect product yield, generate savings and improve environmental compliance.

By SUEZ Water Technologies and Solutions based in Trevose, PENNSYLVANIA (USA).

By Global Treat, Inc based in Spring, TEXAS (USA).

Contaminated mine water is generated when rock containing sulphidic minerals is exposed to water and oxygen, resulting in the production of acidity and high concentrations of metals and sulphate in the water. Mine drainage, process water and storm water associated with industrial activities are the main types of water produced in mining operation. The two primary aims of the treatment of contaminated mine water are to neutralize acidity and removal metals. Lenntech provides sustainable complete water treatment...

By Lenntech Water Treatment based in Delfgauw, NETHERLANDS.

The method allows determination of herbicides classified as phenoxycarboxylic acids, specifically: 2,4-dichloro-- phenoxybutyric acid (2,4-DB), 2,4-dichlorophenoxypropionic acid (2,4-DP, Dichlorprop), 2,4-dichloropheno-- xyacetic acid (2,4-D), and phenoxyacetic acid in samples of natural, potable and treated waste water by capillary electrophoresis.

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Moisture needs to be measured in feed stock gases in the manufacture of polymers . For example, pre-dried benzene is fed in to a reactor containing hydrochloric acid – if the dryers are not operating properly moisture in the benzene promotes acid corrosion of the reactor and process lines. Several processes require water concentrations of specific values to optimise efficiency and yield; in such cases more sophisticated instruments are required.

By Moisture Control & Measurement Ltd based in Wetherby, UNITED KINGDOM.

The largest volume effluents in petroleum refining include “sour” process water and non-oily/non-sour but highly alkaline process water. Sour water is generated through a number of processes, such as: - Desalting - Topping - Vacuum distillation - Pretreating - Light - Middle distillate hydrodesulphurization - Hydrocracking - Catalytic cracking - Coking - Visbreaking/thermal cracking Sour water may be contaminated with hydrocarbons, hydrogen sulfide, ammonia, organic sulfur compounds, organic acids, and phenol....

By Advanced Filter Systems based in ILLINOIS (USA).

Application: Stainless steel pipe DN 500. Partial filling with heavy fluctuation. Acidified, very turbid water (approx. 50 NTU).

By NIVUS GmbH based in Eppingen, GERMANY.

Introduction The method is used for the determination of acetic acid (as acetate ions) in the samples of natural water, drinking water, and waste water by capillary electrophoresis.

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

The Mining Sector is one of the core industrial sectors being served by AdEdge Technologies. It is quickly becoming the fastest growing segment of our company. We offer customer driven water treatment solutions by understanding the needs of our customers and the demands of achieving ever changing and challenging water treatment discharge standards. From exploration to site closure and post closure, AdEdge can assist you in meeting your water treatment needs. With today’s emphasis on sustainability, AdEdge&rsq...

By Adedge Water Technologies, LLC based in Buford, GEORGIA (US) (USA).

Strong acid cation exchange resin sodium form crosslinking 7% DVB styrene-DVB copolymer. Application：water softening Matrix：ST-DVB Type: Gel Functional group：sulphonic acid Appearance：amber Spherical beads

By Xi`an QingYun Water Treatment Tech Co.,Ltd based in CHINA.

Rotating NDCF (= novoflow Dynamic Cross-Flow)- filter systems are particularly characterised by an outstandingly low energy consumption of approx. 0.12- 0.25 KW/1 m² filter area. We also offer facilities at different sizes for rent to test your product. Plant sizes available between 1 m² and 500 m² filter area.

By Novoflow GmbH based in Rain / Lech, GERMANY.

Forklifts and other machinery used to move and store product can be challenging to wash because of the hazardous materials found in the runoff water. We oxidize lead paste and sulfuric acid, neutralize the pH, and provide an effluent suitable for safe discharge.

By Oiltrap Environmental Products, Inc. based in Tumwater, WASHINGTON (USA).

Power Generation: Aqua Ammonia, Sodium Hypochlorite, Sodium Hydroxide (Caustic Soda) 20%-50%, Hydrogen Peroxide, Sodium Bisulfite, Sulfuric Acid, Citric Acid, Soda Ash, Sodium Bicarbonate.

By Carus Corporation based in Peru, ILLINOIS (USA).

We can treat water used for mining applications to remove or reduce acid, arsenic, heavy metals, and other high mineral content.

By Oiltrap Environmental Products, Inc. based in Tumwater, WASHINGTON (USA).

GCL can be used in highway and civil applications such as at airport de-icing facilities used to remove ice build up on the surfaces of planes. During the application process, glycol-based de-icing fluids can leak into local stormwater runoff, potentially causing pollution. CETCO GCLs were found compatible with de-icing fluid (glycol diluted 50/50 with water). GCLs can also be used to line roadway drainage swales for containment and prevent excessive percolation, thereby minimizing potential for groundwater...

By CETCO based in Kings Norton, UNITED KINGDOM.