Only show results available in Virginia? Ok

activated carbon system Applications

  • Activated carbons for drinking water industry

    Carbon Activated Corp. is one of the major suppliers of activated carbon to the drinking water industry. Our carbon is used for numerous applications such as the manufacture of filter cartridges and RO systems and dialysis treatment. We provide carbon services to some of the largest municipalities in the US for ground water/potable water filtration. We also supply other types of filter media such as anthracite, sand and gravel and supply various types of filtration systems.

    By Carbon Activated Corporation based in Compton, CALIFORNIA (USA).

  • Premium

    Measurement solution for on-line carbon bed system

    Commonly, activated carbon beds are used as abatement systems on plant, with emissions being reduced by adsorption onto the bed. The efficiency of any abatement system is critical to its operation, not just in ensuring emissions are reduced as much as possible, but an efficient bed has cost savings for the operator.

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Premium

    MPP water purification systems for industrial waste and process water application

    Removal of total spectrum of non-polar and polar hydrocarbons proven in practice: MPPE removes toxic, non-polar, non biodegradable compounds, aromatics, poly aromatics, halogenated, chlorinated, PCBs, THT (TetraHydroTiophene), Dioxins, CS2 etc. Folowed by biotreatment removing polar biodegradable compounds. Optional: UF and/or activated carbon filtration and RO for reuse as process or boiler feed water.

    By VWT Techno Center Netherlands B.V. - MPP Systems based in Ede, NETHERLANDS.

  • Premium

    Power Generation

    MEGTEC is actively involved in providing Power Generation solutions for many applications ranging from utilizing process heat recovery systems to utilization with boilers, to recovering and utilizing Ventilation Air Methane (VAM) from coal mines. MEGTEC has developed VAM processing technologies for either abatement only and in combination with energy recovery and utilization. MEGTEC’s proven technologies are destroying methane while generating high quality carbon credits, electricity for coal mines and heating for local communities and facilities.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Wastewater Recycling

    TIGG’s activated carbon wastewater systems allow industry to meet environmental effluent requirements and discharge directly to POTWs or permitted surface waters. In some cases TIGG’s systems are used to recycle wastewater for non potable water applications to lessen demand on local water resources.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Treatment of Municipal Water

    TIGG specializes in providing equipment and services for removal of disinfection byproducts, metals, organics and solids in the municipal water treatment market using activated carbon and other media. In addition to treatment systems for the municipal water market, TIGG can design and fabricate tanks for surge protection and emergency water storage.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Water Treatment for Municipal Drinking Water

    Municipalities use TIGG’s water treatment equipment all across the United States. Our experts work with consulting firms, engineers and local water authorities to design and manufacture integrated adsorption systems for the removal of drinking water contaminates such as metals, organics and solids through the use of granular activated carbon, sand, multi-media, and resins.

    By TIGG, LLC based in Oakdale, PENNSYLVANIA (USA).

  • Solutions for recovering metals

    The mining industry relies on Calgon Carbon’s Granular Activated Carbon (GAC) to recover gold and other precious metals. Calgon Carbon’s ISEP® Technology is used to recover precious, rare earth and base metals, uranium, copper, nickel and zinc from ore, waste and reclaim streams. Our high-quality activated carbons have been developed and successfully proven to maximize efficiency by reducing the loss of precious metals and the consumption of carbon in three precious metal extraction techniques: Carbon-in-Leach (CIL), Carbon-in-Pulp (CIP) and Carbon-in-Column (CIC). When Ion Exchange is employed for metal recovery in leach and waste streams, Calgon Carbon’s ISEP ® system provides a continuous, consistent and high purity concentrated product while minimizing the use of chemicals, resin and wastes. Calgon Carbon’s continuous ion exchange systems are the most flexible, robust, and accepted in the industry.

    By Calgon Carbon Corporation based in Pittsburgh, PENNSYLVANIA (USA).

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors which can effect worker`s health and reduce productivity. Some of the most common coatings are polymers which include polyurethane, epoxy and moisture-cure urethane. Many different industries required the use of glues, adhesives, solvents and different chemical agents in their production process, but are unsure of the best way to handle this nuisance. Exhausting fumes outside may be an option when VOCs are extremely dangerous and odorous but companies must also comply with EPA guidelines which regulate which gases can be emitted. In cold climates and in air-conditioned facilities, capturing, filtering and recirculating fumes can provide huge energy savings preventing costly heat loss and energy intensive air makeup systems. Utilizing activated carbon granules can allow operators to filter VOCs and odors from painting and cutting applications. Different quantities and types of carbon modules are required depending upon the contaminant. Contact Diversitech with an MSDS sheet detailing your chemical`s characteristics for an evaluation of your workplace air quality problem.?

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you