Only show results in Massachusetts? Ok

aeration wastewater Applications

  • Premium

    Water aeration for the wastewater industry

    By Landustrie Sneek BV based in Sneek, NETHERLANDS.

  • Premium

    Equalization basins for aeration and mixing

    Whether you have in-line or off-line equalization basins or lagoons with a large surface area or small deep tank; our flexibility can help you create a solution to fit your needs. We can help you minimize flow and/or loading spikes by providing mixing with or without aeration to allow your downstream treatment facility to run smoothly. We have years of experience and can provide you with trusted solutions.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Liquid/solid separation equipment for aeration

    Aeration is an effective and low-cost solution to oxidize iron and manganese. It can also provide high-efficiency removal of gases such as hydrogen sulfide, carbon dioxide, methane, and volatile organic carbons, which results in better process performance and/or improvement of taste and odor.

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA).

  • Wastewater aeration application

    Assembly of Airus HDSR Blower, 4kw Teco quality Motor at Balakong workshop and ready for delivery to customer for wastewater treatment plant in Malaysia. ~ Environmech Sdn Bhd

    By Environmech Sdn Bhd based in Balakong, MALAYSIA.

  • Premium

    Aeration and mixing technologies for fog removal

    Ideal for industrial applications, our Aire-O2 Microfloat Dispersed Air Flotation (DAF) System is an effective, affordable and reliable physical/chemical pre-treatment technology for removing up to 90% of fats, oil, and grease, 60% of total suspended solids, and 30% of Biochemical Oxygen Demand – all at a much lower cost than traditional DAF systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Air control for wastewater treatment aeration

    Aeration Process Introduction: Waste Water Treatment removes impurities and contaminants from a com¬munity`s sewage utilizing a number of different processes and a variety of equipment. One of the processes is the use of surface aerated basins that use aerobic micro-organisms to remove 80 to 90% of organic matter in waste water. Oxygen concentration in the water basins is a critical factor to promote the optimum micro-organism growth rate needed to treat the water in the shortest amount of time. As a result,...

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Wastewater treatment ponds

    In rural areas, several thousand non-aerated and aerated pond wastewater treatment plants are operated in Germany, and in some regions the share of wastewater treatment plants is still 30% or more. These ponds are mostly designed for sizes of less than 5.000 P.E. and a simple carbon decomposition and do not meet today`s inflow loads and outflow requirements. However, by cost-effective retrofitting of aerators and other components and adaptation of the process technology, the existing volumes can usually be...

    By ATB WATER GmbH based in Porta Westfalica, GERMANY.

  • Premium

    Aeration and thorough mixing for lagoon optimization

    Lagoon SolutionsWith thousands of installations worldwide, Aeration Industries provides lagoon solutions that are built on the experience and expertise that comes from more than 40 years of experience in wastewater treatment. Whether it’s industrial wastewater treatment requiring thorough mixing and high oxygen transfer efficiency, or a municipal wastewater treatment system requiring efficient and effective treatment; Aeration Industries will design a solution to optimize your current lagoon.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for aerobic digester

    Powered by the Aire-O2Triton® Process Aerator/Mixer. Municipal and industrial aerobic digesters are an ideal application for the Aire-O2 Triton process aerator/mixer. The surface-mounted, minimal maintenance Triton provides superior aeration and mixing in solids of up to 4% and depths to 33 feet. Aeration Industries’ Aerobic Digester solution offers substantial capital and operational savings, as well as improved process flexibility. Multiple mounting options are available to best fit your needs.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Aeration Blower Packages

    Enclosed or Unenclosed - Variable or Fixed Frequency - Design for Optimal Efficiencies - Built to Last

    By Accurate Air Engineering, Inc. based in Cerritos, CALIFORNIA (USA).

  • Premium

    Aeration and mixing technologies for winery wastewater treatment

    Your partner from vine, to barrel, to bottle. Wine production generates a wide variety of challenges managing wastewater throughout the year, and decades of helping winemakers has taught us that no two winery wastewater treatment systems are alike. In the face of increasing scrutiny from regulatory agencies, along with water, energy, and sustainability initiatives, we understand why you might feel like your focus is shifting from winemaking to wastewater management. That’s where we can help.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Fluence MABR technology - low-energy nutrient removal for wastewater treatment

    Fluence MABR (membrane aerated biofilm reactor) technology address the critical challenges of wastewater treatment plants for: nutrient reduction, high effluent quality, compliance with regulations, minimized energy consumption, at a small footprint, whil

    By Fluence Corporation based in White Plains, NEW YORK (USA).

  • Premium

    Aeration and mixing technologies for municipal wastewater treatment

    Municipalities of every size are subject to public and governmental scrutiny of their municipal wastewater treatment efficacy. As effluent water quality regulations become increasingly stringent, Aeration Industries partners with municipalities to develop economical, environmentally friendly, and sustainable wastewater treatment solutions; customized for each unique environment.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for chemical wastewater treatment

    Better Water Quality for Improved Productivity. Wastewater treatment solutions that meet rigorous standards. We understand how important it is to maintain consistent production. That’s why we will partner with you create a customized aeration solution that fits your needs and is flexible based on production fluctuations.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Regenerative blowers

    Regenerative blowers for waste water aeration. Rotary lobe blowers for waste water aeration.

    By Air Power Products Limited based in Cambridge, ONTARIO (CANADA).

  • Turbo blower ZCJSD

    Turbo blower ZCJSD is widely used for waste and wastewater treatment

  • Acid Eddy Chemical Dilution Trough

    By Global Treat, Inc based in Spring, TEXAS (USA).

  • Surface Aerators for Farm Wastewater

    These industries that purchase Surface Aerators include municipal wastewater plants, wineries, breweries, aquaculture farms, dairy farms, horticulture nurseries, hog and cattle feedlot operations, mining operations, chemical companies, food processing plants, and miscellaneous industrial wastewater operations among others. In addition VaraCorp sells hazardous duty aerators to frac pit operators. VaraCorp’s air turbine surface aerator can transfer 4.7 pounds of dissolved oxygen per horsepower hour according...

    By VaraCorp LLC based in Wimberley, TEXAS (USA).

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing)....

    By Industrial Tomography Systems (ITS) based in Manchester, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you