Only show results in Virginia? Ok

aerator system Applications

  • Premium

    Aeration and thorough mixing for lagoon optimization

    Lagoon SolutionsWith thousands of installations worldwide, Aeration Industries provides lagoon solutions that are built on the experience and expertise that comes from more than 40 years of experience in wastewater treatment. Whether it’s industrial wastewater treatment requiring thorough mixing and high oxygen transfer efficiency, or a municipal wastewater treatment system requiring efficient and effective treatment; Aeration Industries will design a solution to optimize your current lagoon.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for fog removal

    Ideal for industrial applications, our Aire-O2 Microfloat Dispersed Air Flotation (DAF) System is an effective, affordable and reliable physical/chemical pre-treatment technology for removing up to 90% of fats, oil, and grease, 60% of total suspended solids, and 30% of Biochemical Oxygen Demand – all at a much lower cost than traditional DAF systems.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Premium

    Aeration and mixing technologies for activated sludge systems

    The activated sludge process uses a mass of organisms to aerobically treat wastewater and is used to remove biodegradable organics from both municipal and industrial wastewaters.

    By Aeration Industries International (AII) based in Chaska, MINNESOTA (USA).

  • Automated solutions for the aeration lagoon / pond dredging

    LWT`s dredging systems are used for aeration lagoon / pond dredging applications. A dredging system for removal and disposal of raw sewage solids, decayed algae and microorganisms, and algae-laden sludge results in a long term solution for treatment plants. Aeration lagoon / pond dredging increases lagoon storage volume, provides improved detention time, and accommodates increased plant flow.

    By Liquid Waste Technology LLC (LWT LLC) based in New Richmond, WISCONSIN (USA).

  • Electrical Based Tomography Systems for Batch mixing

    Batch mixing generally refers to mixing processes in vessels and ITS tomography instrumentation provides a tool to understand, optimise and control mixing. Tomography sensors take data from between 200 to 2,400 measurement points in a single snapshot, thus providing a sound basis to monitor changes in concentration of different materials and so quantify mixing. Sensors can be retrofitted through using probe based instruments, scanning the z-axis (which usually presents the key challenge to effective mixing). Alternatively, an array of up to 8 circular planes, each with 16 electrodes can be used to provide a more complete picture of the mixing process.

    By Industrial Tomography Systems plc (ITS) based in Manchester, UNITED KINGDOM.

  • Water quality monitoring systems for wastewater & effluents monitoring industry

    Instruments for monitoring the aeration-process, nitrification and de-nitrification; chlorination and de-chlorination; as well as the final discharge into the environment.

    By SWAN Analytische Instrumente AG based in Hinwil, SWITZERLAND.

  • Air cleaning systems solution for clean rooms

    A “white room” is a room where aeration, ventilation, air filtration, building materials and operating procedures are prescribed in order to control the concentration and quality of the particles which are present in the air and to meet adequate cleaning standards.

    By GGE srl based in Rio Saliceto, ITALY.

  • Oxygen Generating Systems for Sewage Treatment

    Using Oxygen to Solve Waste Water Problems Lack of oxygen can cause inadequate purification or even anaerobic decomposition, as well as offensive odors. Injecting oxygen into sludge beds &/or piping allows you to: * Reduce nitrogen levels * Meet peak O2 demands * Have a back up to your aeration system * Pre-purify waste water * Control odors * Deter corrosion damage * Meet increased requirements regarding waste water purification

    By Oxygen Generating Systems Intl. (OGSI) based in North Tonawanda, NEW YORK (USA).

  • Filtration systems & solutions for biosciences and scientific industry

    The scientific community and in particular for that of the life science industries such as the medical, pharmaceutical  and healthcare, have a growing need for superior technologies and products in filtration, separation, purification, aeration and liquid transfer. The range of BioVyon materials and applications are continuously expanding, driven by new market requirements and available to both OEM and end user customers. Applications include separation or filtration for healthcare, medical and pharmaceutical products, shut off valves for catheters, diagnostic wick and sample preparation devices.

    By Porvair Filtration Group based in Fareham, UNITED KINGDOM.

  • Premium

    Measurement of ethylene oxide for monitoring workplace exposure limits

    The Series 8900 Ethylene Oxide Analyzer combines the selectivity of gas chromatography with the sensitivity of a Photoionization Detector (PID) providing interference free response to Ethylene Oxide (EtO) at levels below 0.05 ppm. This analytical method is referenced in OSHA`s `Occupational Exposure to Ethylene Oxide: Final Standard` 29 CFR Part 1910. The system documents exposure levels including: time-weighted averages (TWA), short-term exposure limits (STEL) and instantaneous alarms. Areas that are typically monitored include; EtO Sources - gas storage areas, sterilizer doors, aeration doors, and the General Work Area - decontamination, packaging and preparation and sterile product storage areas.

    By MOCON, Inc. - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Water Storage for the Wastewater Industry

    Liquid waste discharged by domestic residences, commercial properties, industry, and/or agriculture. Superior Tank Co., Inc. offers a wide range of products such as Open Tops, Aeration and Trickling Filter tanks. Our engineers can create a wastewater bolted or welded steel storage tank system that will best suit your needs. We are able to package and ship our bolted and welded steel storage tanks internationally.

    By Superior Tank Co., Inc. based in Rancho Cucamonga, CALIFORNIA (USA).

  • Environmental technology for water treatment industry

    In many fields of water treatment Körting ejectors are applied as gas introducing systems; Waste water aeration in aeration tanks and SBR-Plants. Introducing ozone or oxygen. Pressurised dissolved air flotation. Disinfection of potable water and de-acidification.  Further applications are: Diluting and conveying acids and lye during the process of regenerating ion exchangers.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Premium

    Solutions for the wastewater sector

    Conventional wastewater treatment systems are focused on efficient removal of polluting components. This is commonly done through aeration and separation of formed biomass from the cleaned water. After treatment the water would be discharged onto surface waters or subsoil irrigation. Introduction of polishing steps after these treatment systems opened up the possibilities to reuse water for either irrigation or even potable water. DMT Environmental Technology also implements these solutions with its MemBioRex membrane bioreactor. Nowadays novel technologies enable reuse of saline water within industries such as unconventional oil and gas, industry, agriculture, and mining. DMT Water Technology develops and realises innovative products to enable our customers to meet these challenges.

    By DMT Global Environmental Solutions BV based in Joure (NL), NETHERLANDS.

  • Fermentation Off-Gas Analysis

    In pilot plant and production scale fermentors, information relating to yield of product is of high importance. Hiden's gas analysers are configured with a multiport Off-Gas analysis manifold enabling simultaneous sampling from multiple fermentors. Data is used for the calculation of the respiratory quotient, carbon production rate and oxygen uptake rate. The Off-Gas measurement provides the respiratory quotient in a time and space averaged form and with good response time. By comparison data from multiple dissolved species probes are more specific and can provide information about stirring efficiency, aeration and feed distribution within the fermentor. Dissolved gas measurements have the advantage of giving direct information on gas uptake and for dissolved output rates. Hiden Analyticaloffers systems with either Off-Gas or dissolved species inlets or both.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

  • Fermentation Off-Gas Analysis

    In pilot plant and production scale fermentors, information relating to yield of product is of high importance. Hiden's gas analysers are configured with a multiport Off-Gas analysis manifold enabling simultaneous sampling from multiple fermentors. Data is used for the calculation of the respiratory quotient, carbon production rate and oxygen uptake rate. The Off-Gas measurement provides the respiratory quotient in a time and space averaged form and with good response time. By comparison data from multiple dissolved species probes are more specific and can provide information about stirring efficiency, aeration and feed distribution within the fermentor. Dissolved gas measurements have the advantage of giving direct information on gas uptake and for dissolved output rates. Hiden Analyticaloffers systems with either Off-Gas or dissolved species inlets or both.

    By Hiden Analytical based in Warrington, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you