air ammonia Applications

17 Results found
Only show results available in Virginia?
OK
  • Keyword: air ammonia ×

Air pollution control solution for the Ammonia and odour

by Macrotek Inc.     based in Markham, ONTARIO (CANADA)

Control of emissions is often required due to the hazardous nature of the contaminant. Often, control or removal is necessary due to offensive odours. Ammonia, sulfur and other related compounds fall in these categories. Macrotek offers many control technologies to capture ammonia and other odour causing contaminants. Reagents are often used to neutralize and stabilize the by-product.

radiello™ Passive Sampler as a Tool for the Measurement of Atmospheric Ammonia Concentrations and Dry Deposition

by Sigma-Aldrich Co., LLC     based in Bellefonte, PENNSYLVANIA (USA)

The radiello ammonia sampler impregnated with phosphoric acid represents a low-cost, reliable and simple tool for assessing the atmospheric deposition of ammonia at parts per billion (ppb) concentration levels.

Applications and Air Pollutants Removed for Wastewater Treatment Operations

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

For industrial and municipal treatment plants; Chemical scrubbers, biological towers and adsorption systems to remove hydrogen sulfide, mercaptans, other organic sulfur compounds and ammonia from digesters, pump stations, ponds, grit and screening works, sludge filter presses and dryers. Special Wet Electrostatic Precipitator for sewage sludge incinerators. Stripping ammonia and other volatile compounds. Decarbonization removal of carbon dioxide from wastewater.

Insitu Flue Gas Desulfurization - DeSOx Analyzer

by Cerex Monitoring Solutions, LLC.     based in Atlanta, GEORGIA (US) (USA)

The Cerex UV3000P in-situ multi-gas analyzer for DeSOx, DeNOx, Ammonia Slip and general CEMs.

PLAZKAT systems for treatment (removal, neutralisation) of smelly substances from the air

by Plasma Air Systems Corporation     based in Harju Maakond, ESTONIA

PLAZKAT Aero units are used to neutralize bad smells from waste treatment facilities, caused by the presence of sulfur and nitrogen compounds - hydrogen sulfide, mercaptans, and ammonia. Urban waste treatment facilities, local waste treatment systems in factories, pumping stations in waste water treatment systems are characterized by a strong smell of sulfur and nitric compounds.

Applications and Air Pollutants Removed in the Fertilizer Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Wet Scrubbers, dry collectors, wet electrostatic precipitators and complete engineered systems for urea, MAP, DAP, TSP and AN Plant rotary dryers and coolers, reactors and ammoniation granulators, pug mills, rock acidulation, curing, storage and material handling operations to control emissions of: particulate, including phosphate rock dust, ammonium phosphate, ammonia, nitric acid, NOx, phosphoric acid, hydrogen fluoride, silicon tetrafluoride, sulfuric acid, removal. Complete systems for scrubbing and recovery/reconcentration of fluorosilicic acid up to 25% concentration.

NH3 Monitoring in Air

by Unisearch Associates Inc.     based in Concord, ONTARIO (CANADA)

NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

Dust collection and odor control in waste management sites

by F.G.M. engineering srl     based in Santa Croce sull`Arno, ITALY

Th turn key plant is composed by three different wet stages. The first stage is a venturi jet scrubber to collect dust and particles, then the second and third stages are deputed to absorb bad smells, such as H2S, Ammonia and Ammines. The absorption takes place thanks to the injection of chemicals (such as Sulphuric Acid, Sodium Hypochlorite and Sodium hydroxide.

Applications and Air Pollutants Removed in the Metal Mining Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Complete line of wet scrubbers for all metals mining applications. Scrubbers for removal of acid gases, particulate and mists from acidulation, reaction tanks and dryers. Sulfuric acid, sulfur dioxide, ammonia and hydrogen cyanide removal. Control of micron and submicron size particulate metal fumes from rotary furnaces.   

Applications and Air Pollutants Removed in the Biomass Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Flue gas particulate and acid gases from biomass and bagasse boilers. Removal of ethanol, CO2 scrubbers and yeast cells from fermenters.  Removal of ash particulate, tars, acid gases and ammonia from steam reformers, gasifiers, pyrolosis units and cooling of syngas streams to acceptable limits to enable use as a fuel source for power generation or as a feedstock for chemical products. For tar removal, combination technologies can be used including oil based scrubbing solutions to reduce waste water generation. Ethanol and yeast cell removal from fermenter off-gases. Methanol from processing operations. Hydrogen sulfide removal on landfill, digester and producer gases with regenerable chemistries. Odor control for biomass storage facilities including carbon monoxide removal in wood chip storage areas. 

Applications and Air Pollutants Removed in the Energy (Power) Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Wet scrubbers and Wet electrostatic precipitators for removal of sulfur dioxide and trioxide, ash particulate, NOx and mercury from coal fired boilers. Sulfur dioxide, NOx and particulate from oil fired boilers and diesel engines. Ash particulate from Biomass boilers including Bagasse type. Complete scrubber systems for sulfur dioxide removal using lime, limestone to gypsum quality and all sodium, magnesium and potassium chemistry scrubbing solutions including ammonia for ammonium sulfate production. For gypsum production, complete air sparging oxidation systems are incorporated in the scrubbers along with all needed auxiliary equipment. Waste Heat Recovery options with Q-Sense direct contact heat exchanger technology.  

Gas monitoring instruments and systems for process NOx measurement

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

Applications and Air Pollutants Removed in the Metallurgical and Metal Finishing Industries

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

From Aluminum to Zinc in the Metals Industry, Bionomic offers field proven extensive line of equipment and systems for; capturing acid gases, ammonia and alkaline mists from metal cleaning, treatment, etching and finishing operations including chemical milling. Acid and NOx emissions from pickling, anodizing, chemical milling and precious metals dissolving operations. Systems for HCL recovery from pickling lines, special scrubbing equipment and chemistries for NOx removal. Zinc galvanizing and electrogalvanizing line emissions. Removal of fine metallic particulate including tars from smelters and sinter plants as well as particulate emissions from blast, reverberatory and other furnaces. 

Applications and Air Pollutants Removed in the Food Products Industry

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Complete line of dry and wet collectors for applications requiring removal of particulate from dryers, mixers, blenders and tanks. Odor control wet chemical scrubbers with liquid or gas phase oxidation chemistries and Bioscrubber systems to control odoriferous food products, ingredients and flavor emissions from processes and dryers including fish odors. Corn acidulation and starch processing acid and ethylene oxide emissions. Remove smoke house emissions and particulate, grease and odors from meat cookers and fryers. Ethanol emissions from baking ovens. Ammonia from refrigerant evacuation. Sodium hydroxide mists from CIP cleaning of tanks and equipment. Waste heat recovery and more. 

Applications and Air Pollutants Removed in Wastewater Treatment Operations

by Bionomic Industries Inc.     based in Mahwah, NEW JERSEY (USA)

Removing hydrogen sulfide, mercaptans and other organosulfur compounds from wastewater treatment plant odor causing processes and areas. Stripping of ammonia and other VOC compounds.

Gas Detection Solutions for Fertilizer Manufacturing

by Boreal Laser Inc.     based in Edmonton, ALBERTA (CANADA)

Ammonia is a notoriously difficult compound to measure accurately and reliably using standard chemical sampling techniques. The great advantage of the optical laser gas detection technique for quantitative ammonia monitoring is that the optical measurement does not affect the air being sampled – and so a true, undisturbed value for ammonia concentration can be determined. The very high resolution and specificity of the laser method also means that is no interference from other gases in the air (for example, water vapor) – such interferences complicate other optical techniques using IR or UV.

Odour Monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Measurement of odours from pulp & paper, feedlots and natural sources is challenging and requires careful selection of instrumentation. Ecotech offers a complete monitoring solution designed for this application. Odours are one of the most common sources of air pollution complaints and may be due to a wide variety of sources from rotting vegetation, animal feedlots, pulp and paper manufacturing, sewerage treatment facilities etc. The measurement of odours is extremely difficult due to the variety of sources of odour and the often very low ppb concentrations that produce odour. However, some industries and applications have a known source of odour resulting from compounds such as mercaptans, hydrogen sulphide, ammonia, typically from industries such as pulp and paper manufacturing, fertiliser production or natural sources such as rotting vegetation. Ecotech is able to offer extremely sensitive instrumentation and systems that enables the low ppb monitoring of these species down to 1 ppb, fully integrated with our data evaluation and reporting software.

Related Terms for air ammonia

Need help finding the right suppliers?

Let the XPRTs do the work for you