Only show results available in Virginia? Ok

air conditioning Applications

  • Disinfection of air-conditioning systems

    The good condition of an air-conditioning system in terms of hygiene is a key element in maintaining at a high level the quality of indoor air. In this way an important factor in human health is ensured. The basic steps related to the hygiene of an air-conditioning installation are: Mechanical cleaning of vents. Chemical cleaning and disinfection.

    By Dimtech S.A based in Keratsini, GREECE.

  • Air Conditioning Energy Saving Systems

    Air Conditioning Energy Saver Systems, Made in England, UK saves up to 30% of Air Conditioning Energy Consumption and Electricity Bill Costs. The UK made Air Air Conditioning Energy Saver System is Ideal for the following Key Applications:- Government Buildings, Transport Terminals, Airports, Hotels, Villas and Houses, Offices, Leisure Facilities, Industrial Buildings, Clubs, Supermarkets, Restaurants, Retail, Shopping Malls, Labor Accommodation, The ETL AirCon Energy Saver System from EnviroTech (ETL) is “Manufactured in England” with distributors in: Abu Dhabi, Dubai, Sharjah, RAK, and Ajman throughout the U.A.E also in Oman, Kuwait, Egypt and Saudi Arabia will save between 20% to 30% of Air Conditioning kWh Energy Consumption and Electricity Costs by reducing the run times on the air conditioning unit compressor and increasing Energy Efficiency. This intelligent UK air conditioning energy saver system or air conditioning energy saver system will analyse the temperatures.

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • Premium

    Cement

    MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Metallurgical

    MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Iron and Steel

    SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Prescribed Burning

    A general understanding of the separate and combined effects of several weather elements on fire behavior is needed to plan and execute a good prescribed burn. Because weather and fuel factors interact, an experienced prescribed burner can conduct a successful burn even with one or more factors slightly outside the desired range—as long as they are offset by other factors. Accurate fire weather monitoring of fire danger indices via the RAWS network, providing historical data leading up to a prescribed burn is critical in the planning stages. However, having accurate weather conditions in a micro-climate scale in real time during the execution of a prescribed burn is just as critical. The weather variables most applicable to prescription burns are air temperature, relative humidity, wind direction, wind speed and precipitation. A combination of wind speed, relative humidity, temperature, and solar insulation largely determines fuel condition which in turn affects fire behavior.

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Premium

    Piping & ducting solutions for the HVAC industry

    The heating, ventilation, and air conditioning industry refers to the technology of indoor temperature control. A sub-discipline of mechanical engineering, HVAC systems are crucial in the design of residential as well as commercial structures. These systems control the temperature, and also the quality of the air that gets circulated, by replacing or exchanging the air in a particular space. Heating, cooling and ventilation systems require high-quality, precision-engineered parts, such as those manufactured by PROCO Products. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

    By Proco Products, Inc. based in Stockton, CALIFORNIA (USA).

  • Industrial solutions for air quality monitoring

    To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our customers.

    By Advantic Sistemas y Servicios S.L based in Alcobendas, SPAIN.

  • Products for Industrial Weather Station

    Situation: Process control, worker safety, incident response, environmental temperature, wind loads, and precipitation volume are all situations and conditions that may require real-time, local weather instruments. HVAC in large facilities may require “weather” instruments when a wall thermostat just won’t cut it.

    By Dyacon, Inc. based in Logan, UTAH (USA).

  • Aviation Meteorology

    SWS and VPF sensors are used in airports throughout the world as part of aviation ground control and meteorological monitoring systems. Our visibility and ambient light sensors form the core of Runway Visual Range monitoring systems used to control the safe landing of aircraft in reduced visibility conditions. Our present weather sensors provide automated precipitation classification and monitoring that forms a vital part of the METAR signals broadcast to aircraft in the airport vicinity. The detection and reporting of thunderstorms is important in the aviation industry supporting both the safety of ground operations and the provision of meteorological data to aircraft and forecasting authorities. Our BTD-300 Thunderstorm Detector has been developed to be compliant with FAA regulations for lightning detection systems used at airfields.

    By Biral - Bristol Industrial & Research Associates Ltd based in Portishead, UNITED KINGDOM.

  • DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

    Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

    By Scalewatcher North America Inc. based in Oxford, PENNSYLVANIA (USA).

  • Premium

    Gas monitoring instruments and systems for DeNOx process control

    In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Premium

    Emission control & air dedusting for steel and ferrous alloys

    teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones as pre-separators. Bag filter failure is consequently a very common problem for clients in this industry. 

    Client`s needs include a very robust dedusting system, either serving as end-stage collector avoiding the need to cool down flue gases, or strongly minimizing the loads of aggressive material to bag filters. 

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Noise monitoring for airport noise

    Air traffic is the source of several forms of disturbance to the surrounding area, including, in particular, noise pollution. Local residents in the vicinity of an airport are the most severely affected and are very conscious of the aircrafts` flight paths and the impact on their day-to-day living conditions.

    By ACOEM based in Limonest, FRANCE.

  • Premium

    Air sampling & monitoring systems for occupational health & safety industry

    HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Premium

    Infrared sources for environmental sector

    Axetris infrared sources are used in a variety of environmental applications: Heating, Ventilating and Air Conditioning (HVAC), Indoor Air Quality (IAQ) and VOC Monitoring, Air Quality Monitoring.

    By Axetris Ag based in Kaegiswil, SWITZERLAND.

  • Premium

    Radiation Monitoring for Environmental Monitoring

    The environment is one of today’s foremost concerns, and its preservation is among the biggest challenges we need to meet in coming years. Saphymo offers a series of global solutions designed to detect the impact of a nuclear accident on the environment and local populations, and hence facilitate crisis management. Our environmental monitoring networks and mobile devices continuously monitor artificial and natural radiation levels in air, water and soil, and provide data transmission to a central supervision station. These solutions are internationally acclaimed for their autonomy, reliability, and ability to resist harsh environmental conditions.

    By Saphymo based in Montigny Le Bretonneux, FRANCE.

  • ElectroCoagulation Water Treatment Plant

    EnviroTech Limited, with distributors in Abu Dhabi, Dubai, Sharjah and Ajman in the United Arab Emirates specialise in a comprehensive range of air conditioning and refrigeration energy saving systems, grey water recycling systems and waste water treatment systems. Our Energy Management System target markets include:- Hotels, Offices, Leisure, Shopping Malls, Restaurants and Retail, Government Buildings, Schools and Universities, Factories, Cold Stores, Supermarkets Water Treatment and Energy Saving Systems EnviroTech Limited with Head Quarters in London, England and Masdar City, Abu Dhabi specialise in a comprehensive range of Air Conditioning Refrigeration Energy Saving Systems manufactured in England, UK and Grey Water Recycling Systems, Waste Water Treatment Systems generally Designed and Made in England in the UK. The water treatment and energy saving systems include ElectroCoagulation and ElectroChlorination systems which require low energy usage with no chemical requirement

    By EnviroTech Limited based in Masdar City, UNITED ARAB EMIRATES.

  • Traffic Emissions Monitoring

    Traffic, especially in urban locations, is one of the greatest contributors to air pollution. Traffic produces a variety of different pollutants that include particulates, NO2, NO, CO, hydrocarbons and in some cases SO2. The monitoring of roadside pollution can be challenging as often it is difficult to find suitable locations for large air quality monitoring systems and many sites that are available can be too far away to be representative of roadside air pollution. Roadside pollution concentrations can change quickly as types and volume of traffic changes and so instrumentation used must be able to cope with these rapidly changing conditions. Ecotech has established a wide variety of roadside monitoring stations incorporated both into large walk-in style shelters to compact monitoring shelters. Our solutions can be tailored to your needs. Ecotech`s compact solution uses a compact monitoring shelter fitted out with a variety of analyzers and particulate monitors. These analyzers offer fast response, minimal maintenance and are widely used for roadside monitoring.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Grinding & Deburring

    Grinding & Deburring dusts are Unbreathable. Many industrial processes generate contaminants in the air in the form of dust and particles. Airborne dust and fine particulate can be hazardous to human health, and should be extracted before it reaches the worker`s breathing zone.? Typical sources of these pollutants arise from cutting, grinding using an angle grinder or die grinder, automated grinding machines, deburring work and many other abrasive processes. Robotic grinding machines generally create a large volume of particulate which can require more filtration media to handle increased dust loads. Whereas other applications such as deburring can create very fine submicron particles that require the use of a high efficiency HEPA filter to capture the fines.? Metal, composite, fiberglass and rubber dust can be extremely dangerous to inhale and can be associated with many different lung conditions and health problems. Diversitech offers a diverse range of dust collectors, extraction arms, filter cleaning machines and downdraft tables for your grinding dust filtration requirements.???

    By DiversiTech based in Montreal, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you