air conditioning industry Applications

11 Results found
Only show results available in Virginia?
OK
  • Keyword: air conditioning industry ×

Air Conditioning Energy Saving Systems

by EnviroTech Limited     based in Masdar City, UNITED ARAB EMIRATES

Air Conditioning Energy Saver Systems, Made in England, UK saves up to 30% of Air Conditioning Energy Consumption and Electricity Bill Costs. The UK made Air Air Conditioning Energy Saver System is Ideal for the following Key Applications:- Government Buildings, Transport Terminals, Airports, Hotels, Villas and Houses, Offices, Leisure Facilities, Industrial Buildings, Clubs, Supermarkets, Restaurants, Retail, Shopping Malls, Labor Accommodation, The ETL AirCon Energy Saver System from EnviroTech (ETL) is “Manufactured in England” with distributors in: Abu Dhabi, Dubai, Sharjah, RAK, and Ajman throughout the U.A.E also in Oman, Kuwait, Egypt and Saudi Arabia will save between 20% to 30% of Air Conditioning kWh Energy Consumption and Electricity Costs by reducing the run times on the air conditioning unit compressor and increasing Energy Efficiency. This intelligent UK air conditioning energy saver system or air conditioning energy saver system will analyse the temperatures.

Piping & ducting solutions for the HVAC industry

by Proco Products, Inc.     based in Stockton, CALIFORNIA (USA)

The heating, ventilation, and air conditioning industry refers to the technology of indoor temperature control. A sub-discipline of mechanical engineering, HVAC systems are crucial in the design of residential as well as commercial structures. These systems control the temperature, and also the quality of the air that gets circulated, by replacing or exchanging the air in a particular space. Heating, cooling and ventilation systems require high-quality, precision-engineered parts, such as those manufactured by PROCO Products. PROCO operates worldwide, and maintains one of the largest product inventories in North America.

Industrial solutions for air quality monitoring

by Advantic Sistemas y Servicios S.L     based in Alcobendas, SPAIN

To protect humans and the environment from damage by air pollution, it is of the utmost importance to measure the levels of pollutants in the air. Real time monitoring of dangerous gases is particularly interesting in hazardous areas, as the conditions can change dramatically very quickly, with serious consequences. ADVANTICSYS employs its knowledge in wireless sensor networks to develop customized solutions for our customers.

Products for Industrial Weather Station

by Dyacon, Inc.     based in Logan, UTAH (USA)

Situation: Process control, worker safety, incident response, environmental temperature, wind loads, and precipitation volume are all situations and conditions that may require real-time, local weather instruments. HVAC in large facilities may require “weather” instruments when a wall thermostat just won’t cut it.

Metallurgical

by Babcock & Wilcox MEGTEC     based in De Pere, WISCONSIN (USA)

MEGTEC TurboSonic provides custom-designed atomizing technologies and air pollution control solutions for the non-ferrous metallurgical industry including Aluminum, Copper, Nickel, Zinc and precious metals producers. SoniCool™ Evaporative Gas Cooling & Conditioning controls high-temperature furnace and converter off-gases, lowering them to temperatures below other spray technologies—without wetting problems. By lowering the temperature and conditioning the gas stream, SoniCool™ protects downstream equipment from damage and improves the efficiency of downstream APC equipment, such as baghouses and electrostatic precipitators.

Air sampling & monitoring systems for occupational health & safety industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q considers the responsibility for worker health and safety to be of paramount importance. This is a responsibility that requires good documentation of facts. Many studies are conducted to evaluate workplace health and safety conditions as they relate to workers exposure to radiation, chemicals, and biological hazards during the normal work day. HI-Qs wide line of air sampling equipment, systems and accessories are used in the monitoring then documentation of these workplaces.

DOCUPAK LLC REDUCES COOLING TOWER CHEMICAL USAGE BY A THIRD

by Scalewatcher North America Inc.     based in Oxford, PENNSYLVANIA (USA)

Docupak LLC, a full service marketing company headquartered in Alabaster, Alabama, has reduced chemical usage by a third and removed all scale from its cooling tower at its plant after installing the patented, award-winning Scalewatcher computerized, electronic water-conditioner from Scalewatcher North America. In addition there are no longer signs of algae growth on the cooling tower louvres. Founded in 1998, Docupak, the operating name of Document and Packaging Brokers Inc., develops and distributes materials for businesses nationwide. In addition to its headquarters in Alabaster, Alabama, the company also operates a further plant in Alexandria, VA and has sales offices in Atlanta, Chicago, Cincinnati, Dallas, Los Angeles, Tampa and Washington, D.C. Aware that health agencies continually draw attention to the risks of limescale and algae in cooling towers and wanting to reduce the use of chemicals in the cooling tower, Plant Manager, Anthony Kinstley decided to install the Scalewatcher electornic water-conditioner through local dealer, Al Chatham of Water Processing and Well Supply in Harpersville, Alabama. An industrial Scalewatcher was installed on to the water-feed line to the building and then a further unit was specifically fitted on to the recirculation line of the cooling tower. “Since using the system the scaling on our cooling tower has been eliminated and we currently use only a third of the original chemicals intended for the water treatment within our system”, said Anthony Kinstley. Many air conditioning and refrigeration plant systems are water-cooled. The heat generated by cooling coils is removed by water, which is passed through a water-cooling tower. These are recirculating systems, which operate at temperatures ideal for bacterial and algae growth, and have plentiful supplies of nutrients. In cooling towers, temperature, water hardness, pH, scale and corrosion are all factors, which increase the chance of biofilms, algae and Legionella colonization. The environmentally friendly Scalewatcher provides a permanent solution to hard water problems without the need of chemicals, salt or maintenance. It works by producing a varying electronically applied force field, induced by a coil wrapped around the outside of the pipework, which keeps the minerals in suspension and thus prevents limescale forming. The water’s increased solubility enables it to dissolve existing scale, which is gradually washed away. “Scalewatcher has proven itself to be highly effective. I would highly recommend this product and service without limitation,” concluded Antony Kinstley. Scalewatcher models are based on continuous research and over 25 years experience and expertise as market leaders in electronic scale control with countless units sold worldwide. The patented Scalewatcher systems are capable of treating pipe sizes from one to 120 inches. All Scalewatcher systems come with a full performance guarantee and are shipped throughout North America.

Emission control & air dedusting for steel and ferrous alloys

by Advanced Cyclone Systems, S. A.     based in Porto, PORTUGAL

teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones as pre-separators. Bag filter failure is consequently a very common problem for clients in this industry. 

Client`s needs include a very robust dedusting system, either serving as end-stage collector avoiding the need to cool down flue gases, or strongly minimizing the loads of aggressive material to bag filters. 

Integrated real-time gas analysis solution for chemical decontamination industry

by CIC Photonics, Inc.     based in Albuquerque, NEW MEXICO (USA)

The threat of terror in the form of chemical and biological warfare agents has been a reality globally since March 1995, when the Aum Shinrikyo sect killed 12 people and injured nearly 6,000 by releasing sarin nerve gas in the Tokyo subway system. More recently, the 2001 anthrax attacks in the USA was a wake-up call that the threat is real. Recent outbreaks of H1N1 and SARS posed threats of worldwide epidemics because air travel provides a means for these diseases to spread globally in less than 24 hours. A major concern of several US government agencies, such as the Department of Defense, Homeland Security, and the Centers for Disease Control and Prevention is not only the detection of hazardous chemical and biological warfare agents (CBWA) or bacteria or viruses that pose an epidemic threat, but the timely decontamination of those agents to a level where they no longer pose a threat to human health and life. The solution requires a means to monitor the effectiveness of the decontaminating reactant or reactants to an endpoint that has been reliably shown to be more than 99% effective in rendering the targeted agents harmless under controlled conditions.

Grinding & Deburring

by DiversiTech     based in Montreal, QUEBEC (CANADA)

Grinding & Deburring dusts are Unbreathable. Many industrial processes generate contaminants in the air in the form of dust and particles. Airborne dust and fine particulate can be hazardous to human health, and should be extracted before it reaches the worker`s breathing zone.? Typical sources of these pollutants arise from cutting, grinding using an angle grinder or die grinder, automated grinding machines, deburring work and many other abrasive processes. Robotic grinding machines generally create a large volume of particulate which can require more filtration media to handle increased dust loads. Whereas other applications such as deburring can create very fine submicron particles that require the use of a high efficiency HEPA filter to capture the fines.? Metal, composite, fiberglass and rubber dust can be extremely dangerous to inhale and can be associated with many different lung conditions and health problems. Diversitech offers a diverse range of dust collectors, extraction arms, filter cleaning machines and downdraft tables for your grinding dust filtration requirements.???

Sulfide Oxidation with Hydrogen Peroxide (H2O2)

by USP Technologies     based in Atlanta, GEORGIA (US) (USA)

Sulfide Odor Control Sulfide is found throughout the environment as a result of both natural and industrial processes. Most sulfide found in nature was produced biologically (under anaerobic conditions) and occurs as free hydrogen sulfide (H2S) - characterized by its rotten egg odor. We are most likely to encounter biogenic H2S in sour groundwaters, swamps and marshes, natural gas deposits, and sewage collection/treatment systems. Manmade sources of H2S typically occur as a result of natural materials containing sulfur (e.g., coal, gas and oil) being refined into industrial products. For a variety of reasons - aesthetics (odor control), health (toxicity), ecological (oxygen depletion in receiving waters), and economic (corrosion of equipment and infrastructure) - sulfide laden wastewaters must be handled carefully and remediated before they can be released to the environment. Typical discharge limits for sulfide are < 1 mg/L. Sulfide Treatment Alternatives There are dozens of alternatives for treating sulfide laden waters, ranging from simple air stripping (for the low levels present in groundwaters) to elaborate sulfur recovery plants (used to treat several tons per day at refineries and coal burning power plants). There are processes based on biology (using compost filters, scrubbing media, or inhibition/disinfection), chemistry (oxidation, precipitation, absorption, and combination), and physics (adsorption, volatilization, and incineration). Each process occupies a niche which is often defined by the scale and continuity of treatment, whether the sulfide is in solution or is a gas, the concentration of sulfide involved, and the disposition of the sulfide containing medium. However, for reasons relating to convenience and flexibility, chemical oxidation (using hydrogen peroxide) continues to grow in its scope of application. Treatment with Hydrogen Peroxide While other peroxygens such as permonosulfuric (Caro’s) acid, peracetic acid, and persulfates will oxidize sulfide, their use for this application is overkill. Hydrogen peroxide (H2O2) is considerably simpler and more cost-effective. H2O2 may control sulfides in two ways, depending on the application: Prevention - by providing dissolved oxygen which inhibits the septic conditions which lead to biological sulfide formation; and Destruction - by oxidizing sulfide to elemental sulfur or sulfate ion.

Related Terms for air conditioning industry

Need help finding the right suppliers?

Let the XPRTs do the work for you