air directive Applications | Environmental XPRT

Premium

VOC and HAP Abatement

As is the case for many industrial manufacturing processes, emissions are best destroyed through the use of thermal and catalytic oxidation technologies. Volatile Organic Compounds (VOCs) and Hazardous Air Pollutants (HAPs) are destroyed through the use of high temperature combustion with direct heat ...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Premium

Ozone monitoring

Ozone found in ambient air can have a direct affect on human health and also has the potential to create photochemical smog. It is for this reason that the U.S. EPA has set a one hour limit of 120 ppb and an 8 hour limit of 80 ppb. Ozone has been found to affect human health by harming the respiratory and ...

By Acoem based in Knoxfield, AUSTRALIA.

Premium

Meteorological Sensors for Dust Monitoring

Air is lifeblood. Daily we inhale approximately 15.000 liter. Still, the air contains invisible pollutants, which vary in its composition and concentration depending on the location. Especially the respirable particles with a diameter of less than 2.5 µm (PM 2.5) were considered to be particularly ...

By OTT HydroMet based in Kempten, GERMANY.

VOC abatement equipments for general industry/production

Our direct evaporative air cooler is widely used within the general production scope, such as production plant assembly lines, warehouse and logistics areas ...

By Munters based in Amesbury, MASSACHUSETTS (USA).

Tunnel solutions for the tunnel air flow

in terms of air flow and direction developed within the tunnel. The TunnelTech 301 is a single point ultrasonic flow monitor that is unaffected by traffic flow and sound reflections. It is designed to withstand the harsh tunnel environment and has a working range of 0-20 metres/second in both ...

By Codel International Ltd based in Bakewell, UNITED KINGDOM.

Gas chromatography solutions for public health & environmental management sector

Having direct analysis of air quality is mandatory. Our products can be put next to hazardous area for online monitoring and direct ...

By APIX Analytics based in Grenoble, FRANCE.

PTR-MS systems for food & flavor science

Aroma real-time quantification with PTR-MS. Rapid screening for complex aroma systems. Rich chemical fingerprints due to soft ionization. Real-time sampling: high throughput. Ideal for chemometric data-mining methods. ...

By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

Direct determination of mercury content in ambient air

Introduction Mercury, being widespread in environment, has toxic effect on a human organism even at a low concentration. Therefore, quantitativ e determination of mercury in vari ous environments is one of the most important environmental monitoring ...

By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).

Weather stations for snowmaking applications

In the business of winter recreation, the weather can become both a friend and a foe. When the conditions just aren’t right for natural snow, snowmaking becomes a great alternative. For snowmaking to be successful, certain conditions must be met. Humidity levels and ambient temperatures affect the wet bulb temperature, super-cooling comes into effect, and evaporation levels must be measured. How are you supposed to measure all these conditions, you ask? Great question. After all, you’re a snow maker, ...

By Dyacon, Inc. based in Logan, UTAH (USA).

Weather stations for modbus applications

In the business of winter recreation, the weather can become both a friend and a foe. When the conditions just aren’t right for natural snow, snowmaking becomes a great alternative. For snowmaking to be successful, certain conditions must be met. Humidity levels and ambient temperatures affect the wet bulb temperature, super-cooling comes into effect, and evaporation levels must be measured. How are you supposed to measure all these conditions, you ask? Great question. After all, you’re a snow maker, ...

By Dyacon, Inc. based in Logan, UTAH (USA).

VOC abatement equipments for data center & telecom cooling

The demand for Data Centers is growing at an accelerated pace and keeping these facilities constantly operational is essential. Alongside this absolute focus on reliability, the industry is also now seeking solutions that reduce energy consumption and carbon emissions associated with data center ...

By Munters based in Amesbury, MASSACHUSETTS (USA).

Weather stations for airport applications

Do you use a small airport, private landing strip, or small municipal runway? If so, chances are high that the indicators of on-site weather conditions are minimal at best – maybe a windsock, if you’re lucky. While such basic indicators are okay if you’re on the ground, they are simply inadequate if you’re flying in. Weather changes, and after a flying day trip, conditions on the landing site can be significantly different than they were at takeoff. Your safety depends on knowing those ...

By Dyacon, Inc. based in Logan, UTAH (USA).

Weather stations for mining applications

There are many environmental factors that must be monitored in the mining industry. Heat stress, heavy rains, winds, and lightning are all elements that must be closely watched to ensure personnel safety and ease of operations. What’s the best way to do this, you ask? We have the answer: a professional weather station that’s easy to use on your own ...

By Dyacon, Inc. based in Logan, UTAH (USA).

Insertion Thermal Mass Flowmeter for Combustion Air

Combustion air is the air that is used to actually burn the fuel. Without combustion air, which is normally forced into the furnace, combustion is impossible. The efficient operation of today’s power plant hinges largely upon accurate and repeatable measurement and control of various air inputs to the ...

By Leomi Instruments Pvt. Ltd based in Gandhinagar, INDIA.

Biofilm effect on Cooling Towers for Industrial Purpose

Cooling towers are used widely in the industry for cooling down a process, there exist many version or types of cooling towers, and each designed with its advantages for the process. The generic term "cooling tower" is used to describe both direct (open circuit) and indirect (closed circuit) heat rejection ...

By Danish Clean Water A/S based in Sønderborg, DENMARK.

Road Sweepers for Effects of Technologies in Sweeping

Mechanical: Make use of 2 side brooms and a large diameter main broom to move the dirt on to the mechanical conveyor which is moving it further to the hopper. Each mechanical sweeper has ability to raise the hopper to unload the material to tractor ...

By Challenger Sweepers Ltd based in Winnipee, MANITOBA (CANADA).

Scrap recycling plants for printed circuit boards (PCB)

Since many years URT is successfully focusing on treatment concepts for printed circuit boards recycling. There exists a basic PCB recovery concept which starts with a one-step shredding of the complete end-of-life printed circuit boards. This is done with a low rotating four-shaft rotary shear producing a granule having a size of 20 mm. Ferrous metals and aluminium can be now separated with this granule size. In this case already 30 % of metals will be obtained which can be sold ...

By URT Umwelt- und Recyclingtechnik GmbH based in Karlstadt, GERMANY.

Spacer fabric for automotive textiles industry

3mesh spacer fabric guarantees perfect air distribution – even under pressure. In addition the perfect adjustment to every contour increases the comfort. Therefore 3mesh is used everywhere, where perfect comfort or soft touch is requested: in climatic and ventilated seats, seat covers, head liners, ...

By Müller Textil GmbH based in Wiehl Drabenderhöhe, GERMANY.