air filter Applications in Canada

  • Premium

    Air Filter Housings for the Air Industry

    By Shelco Filters Distributor in Mississauga, ONTARIO (CANADA).

  • Diesel Air Filter Cleaning

    HOW THE GREEN FILTER CLEANING MACHINE WORKS Easy to load, automatic and programmable cleaning cycles, filters cleaned in 3 to 5 minutes. Dry compressed air cleans filters from the inside out. Pollutant dust is safely captured with our powerful cyclone collector than safely stored in a supplied 55gal drum. Filter Inspection Station available, recommended for air intake filters used in Diesel Engines, measure restriction levels of air filters to confirm filters integrity Filter Inner Diameter: 6.5` Minimum for...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Premium

    Air Filter Housings for the Gas Industry

    By Shelco Filters Distributor in Mississauga, ONTARIO (CANADA).

  • Air dedusting for clinker cooler

    e control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler is usually a problem for plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum conditions. The usual dedusting arrangement is achieved through a bag house which is typically associated with high maintenance costs and downtime in production due to frequent filter element replacements.

    By Advanced Cyclone Systems, S. A. Distributor in Kitchener, ONTARIO (CANADA).

  • Premium

    Laboratory Weighing - Filter Weighing

    Traffic means mobility and air emissions. Thanks to economical advantages, diesel engine becomes more and more popular, but particle emission is strictly restricted by regulations. Determining the weight of particulate matter (PM) is a key task in the automotive industry and one which is likely to become even more important as emissions standards become stricter. To allow fast and easy measurement of particulate matter at any time, METTLER TOLEDO has developed new filter weighing solutions.

    By Mettler - Toledo Int. Inc Distributor in Edmonton, Alberta, ALBERTA (CANADA).

  • Water treatment solutions for HVAC

    For Kinetico, that realization extends to the importance of specialized water treatment solutions customized for specific, wide-ranging applications. Our filters and softeners come in a variety of configurations designed to produce safe, clean drinking water and remove contaminants and hardness. This greatly improves overall water quality and protects expensive (and essential) boilers, laundry facilities and commercial kitchen appliances. To convert first-time guests into repeat customers and to safeguard your...

    By Kinetico - an Axel Johnson Company Office in Bolton, ONTARIO (CANADA).

  • Premium

    Ambient air quality monitoring solutions for PM2.5/PM10 particulate monitoring

    OPSIS provides real-time, flexible monitoring of particulate matter in the ambient air. Particulate matter monitoring with OPSIS, is a cost-effective solution, is ideally suited for use in modern monitoring stations. It can be remote controlled and includes automatic calibration, features that frees time. The SM200 meets the new regulation for automatic monitoring of PM10 and PM2.5. It also meets the new regulation for particulate matter sampling on filter membranes for further analysis of cadmium, nickel, PAH...

    By Opsis AB Distributor in Mississauga, ONTARIO (CANADA).

  • Dust Collector Cartridge Filter Cleaning

    The Green Filter Cleaning Machine effectively and safely cleans your air filters. The recycling of dirty cartridge filers translates into immediate ROI as filters can be reused 3-6 times, depending on application.? Ideal for cleaning dust collector filters, diesel engine intake filters, or any cartridge with an inner diameter greater than 6.5` and an outer diameter less than 20`. The Green Filter Cleaning Machine will accept filter heights up to 32` (40` extended unit available). The filter cleaning mechanism...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Premium

    Monitoring solutions for the dust collectors

    Most industrial processes have dust collectors of some form or other, the most popular being filter bag houses. Very few of these are covered by regulation other than to have a broken bag detector to prevent nuisance dusts escaping and creating a local nuisance. The CODEL StakGard is a low cost Tribo-electric monitor that directly measures mass particulate concentration by sensing the frictional charge created when particles collide with a conductor. The advanced electronics of the StakGard detect this signal and...

    By Codel International Ltd Distributor in QUEBEC (CANADA).

  • NH3 Monitoring in Air

    NH3 (Ammonia) is a colorless gas with a distinctive pungent smell. Ammonia monitoring is essential in coal-fired power plants, where NH3 is used to reduce NOx emissions. The ammonia consumes all of the NOx, but its high concentration that is needed for these purposes also starts reacting with other things and in the process can clog up filters and cause premature failure of expensive SCR equipment and pre-heaters. Not to mention that these high levels create an irreparable damage to the environment.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Compressed air, gas and vacuum solutions for water and waste water treatment

    There are many options to apply methods to avoid damaging the environment. In the case of wastewater e.g. the ventilation of the sediment tank or the pressure ventilation of biological wastewater treatment systems. The oxygen introduction is important, for deep wastewater tanks, wastewater treatment systems with standard aeration tanks or natural clarification ponds alike. If the wastewater has already entered the natural cycle, ventilating lakes and rivers prevents additional contamination. When treating...

    By Aerzener Maschinenfabrik GmbH Office in Vaudreuil-Dorion, QUEBEC (CANADA).

  • Emission control & air dedusting for steel and ferrous alloys

    teel and ferrous alloys production happens in industrial manufacturing processes which involve high temperature exhaust streams, often at more than 900 ºC. Typically, the gas flows into a gas conditioning tower to cool down to approximately 200 ºC, before entering into an ESP. These flue gases from steel or ferrous alloys kilns are also very maintenance demanding for bag filters and the very small size of the particles limit the use of usual dedusters such as regular cyclones and multicyclones as...

    By Advanced Cyclone Systems, S. A. Distributor in Kitchener, ONTARIO (CANADA).

  • Emission control & air dedusting for fuel oil boilers

    For PM emission control in high temperature exhaust streams, such as fuel oil boilers, usual dedusters such as bag filters are very maintenance demanding. Particularly, diesel and fuel particulates are very sticky and clog to filter elements, unless protection reagents are used. Flue gas cooling is also needed in front of the filter when temperatures are higher than 200 ºC. On the other hand, regular cyclones and multicyclones are frequently not able to reduce emissions to present emission limits.

    By Advanced Cyclone Systems, S. A. Distributor in Kitchener, ONTARIO (CANADA).

  • Solutions for personal protection against vapors, gases, air particles & dust

    Our activated carbons provide personal defense solutions against vapors, gases, air particles, and dust. Proven Experience: Since 1942, Calgon Carbon has been helping the world breath more easily by providing the most technologically advanced activated carbons for personal and collective protection filters. Today, we supply high-quality impregnated carbon for military, industrial, and laboratory markets. As new needs for personal protection emerge, we will continue to develop new products and find innovative uses...

    By Calgon Carbon Corporation Distributor in St-Laurent, QUEBEC (CANADA).

  • Grinding & Deburring

    Grinding & Deburring dusts are Unbreathable. Many industrial processes generate contaminants in the air in the form of dust and particles. Airborne dust and fine particulate can be hazardous to human health, and should be extracted before it reaches the worker`s breathing zone.? Typical sources of these pollutants arise from cutting, grinding using an angle grinder or die grinder, automated grinding machines, deburring work and many other abrasive processes. Robotic grinding machines generally create a large...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Laser & Plasma Cutting

    Laser & Plasma Cutting fumes are Unbreathable. Using laser or plasma cutting equipment on either metals or plastics introduces several known carcinogens, such as fused silica and ethyl acrylate, into the air. Occupational Health and Safety organizations recommend reducing personal exposure to the lowest level feasible. Hand held plasma cutting provides metalworkers with a quick and fast way to cut large sheets of metal material. However, plasma and oxy cutting generate a large amount of sparks, slag and fume...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Oil Mist and VOC Collection

    Oil Mist is Unbreathable. Oil based cutting fluids are often used in CNC milling, machining and metalworking. During production, these processes can produce a mist that can threaten sensitive electronic circuitry and presents serious physical risks to employees (accidents from slipping, breathing hazards).? What are the risks in a workshop with oil mist? Exposure to oil mist for a prolonged period of time can cause a number of health issues. Dermatitis Eye, nose and throat irritation Damage to the respiratory...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Painting & Coating

    Paint fumes are Unbreathable. Spray Painting VOCs and Powder Coating dust are both harmful pollutants which are produced during painting operations. The volatile organic compounds (VOCs) emitted from paint can cause respiratory issues and require proper ventilation to remove harmful gasses from the work area. Powder Coating lines and spray painting produce dangerous fumes and dusts which need to be filtered or exhausted outside your facility. Industrial coatings and chemicals can produce toxic VOCs and foul odors...

    By Diversitech based in Montreal, QUEBEC (CANADA).

  • Sulfide Oxidation with Hydrogen Peroxide (H2O2)

    Sulfide Odor Control Sulfide is found throughout the environment as a result of both natural and industrial processes. Most sulfide found in nature was produced biologically (under anaerobic conditions) and occurs as free hydrogen sulfide (H2S) - characterized by its rotten egg odor. We are most likely to encounter biogenic H2S in sour groundwaters, swamps and marshes, natural gas deposits, and sewage collection/treatment systems. Manmade sources of H2S typically occur as a result of natural materials containing...

    By USP Technologies Office in London, ONTARIO (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you