Only show results in Connecticut? Ok

air filter control Applications

  • Premium

    Emission control & air dedusting for Fertilizers

    The recovery of fertilizers typically after drying tunnels or drum dryers is associated with a high load of particulates and very humid gas streams. The recovery of these products is commonly performed by dryer cyclones as they allow for a direct powder capture and avoid filter clogging due to condensation. Arrangements with cyclones and/or with bag filters are usual in the industry.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Emission control solutions for air caption & dedusting sector

    Several industries face problems from dust released during product transportation or processing. This is the case of the Textile, Wood Processing, Mining, Ink Manufacturing and other industries. Frequently, in order to maintain an appropriate level of particles suspended in the air (usually measured in Parts per Million by Volume), dust is extracted with air in strategically positioned caption points and typically recovered in cyclones or in bag filters.

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Air pollution control for ventilation air methane industry

    Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Emission control solutions for biomass milling & drying sector

    Pelletsare typically manufactured from wood chips and sawdust. The wet raw material in usually grinded in a hammer mill and then dried in a rotary dryer heated by a biomass furnace. The material is then collected in dryer cyclones to be pelletized. The air conveying the wet grinded material is cleaned with a particulate filter before going to the atmosphere. A common type of filter used for this application is the cyclo-filter, which combines the operating principles of cyclones with a cartridge filter on top to...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Premium

    Air pollution control for the coating industry

    Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Odor control for composite

    A Single Solution To Manage Composite Odors: Many resins used in the composite industry emit styrene vapors which are considered hazardous in high concentrations and whose odor is an unpleasant nuisance. This gas is categorized as a volatile organic compound (VOC) and listed by the United States Environmental Protection Agency (US EPA) as a Hazardous Air Pollutant (HAP). Styrene is considered highly reactive in the atmosphere and may contribute to smog formation and the production of secondary air pollutants.

    By OMI Industries (OMI) based in Long Grove, ILLINOIS (USA).

  • Premium

    Air pollution control for the metal decorating industry

    Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the automotive industry

    Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air quality monitoring

    To estimate the effects of aerosols on health and climate, it is essential to know their chemical composition. Sampling is done using two different types of aerosol collector. The first type are filter collectors that are based on the deposition of suspended particles on surfaces; the second type are powerful aerosol collectors.

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Premium

    Industrial chemical solutions for the paint industry

    Paint manufacturing facilities generate large quantities of both hazardous and non-hazardous waste. This waste includes equipment cleaning wastewater and waste solvent, filter cartridges, off-spec paint spills, leftover containers, and pigment dusts from air pollution control equipment.

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the pharmaceutical industry

    From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the food and bakery industry

    Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity and odor levels from confectionery and gum manufacturing.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Environmental solutions for the engineered wood products

    The engineered wood products industry relies on Dürr Megtec for regenerative thermal oxidizer (RTO), regenerative catalytic oxidizer (RCO), wet electrostatic precipitator (WESP), dry electrostatic precipitator (DESP), and wet scrubber technologies for effective emissions control of volatile organic compounds (VOCs), hazardous air pollutants (HAPs), particulate matter (PM), and blue haze from wood dryers and press vents. As an industry leader, we offer a comprehensive suite of advanced air pollution control...

    By Dürr MEGTEC, LLC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the remediation industry

    The remediation division of Anguil Environmental Systems (formerly known as Global Technologies) is focused on treating emissions and water contaminants extracted from below the earths` surface. Formed shortly after the 1990 Clean Air Act targeted emissions associated with the extraction of polluted compounds from contaminated sites, Global subsurface remediation equipment has been successfully applied on contaminated sites in North and South America, Europe, Asia and Australia.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Temperature measurement and control devices for power industry

    Serving the Power Industry for over 25 years. Rush deliveries for outages & emergencies. Wide variety of products designed specifically for Power Plant Applications including: Superheater & Waterwall Tubes, Drum Surface, Flue Gases, Steam/Water Lines, Motors, Generators, Boiler Feed Pumps, Air Pre-Heater, Coal Pulverizer and Turbine Performance.

    By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you