Only show results in Texas? Ok

air monitoring data Applications

  • Data Acquisition and Control

    Many companies worry over the quality of emissions data reported to the EPA. CEMS Experts is a skilled and experienced company with over 20 years of proven and dependable service to provide you with a reliable solution to your Analyzer Management and Data Acquisition Software needs. We supply customized DAS solutions for all federal (EPA), state and local CEMS regulations, plus off-the-shelf products for process monitoring, ambient air testing, or any other application requiring fast, reliable data capture and...

    By CEMS Experts - a division of GK Associates, Inc. based in Moopark, CALIFORNIA (USA).

  • Premium

    Data loggers and data acquisition monitoring solutions for the automotive & aerospace industries

    Automotive applications cover a broad range of projects including performance validation, engine manufacturing, fuel efficiency testing, emissions testing, fleet management, and many more. CAS DataLoggers provides highly-accurate, sophisticated data loggers and data acquisition devices for all these projects, no matter how demanding.

    By CAS DataLoggers based in Chesterland, OHIO (USA).

  • Premium

    Air quality and industrial gas monitoring systems for Ambient air monitoring

    Ambient air quality monitoring is the systematic, long-term assessment of pollutant levels by measuring the concentration and types of certain pollutants in the surrounding, outdoor air. Some of these pollutants (commonly called ‘Criteria Pollutants’) are considered hazardous to human health and their levels are regulated by government agencies around the world, including the US EPA. Teledyne API provides a complete line of ambient air quality monitoring instruments, including those for both gas and...

    By Teledyne API based in San Diego, CALIFORNIA (USA).

  • Premium

    Ambient air quality monitoring solutions for fence-line monitoring

    The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Gas Detection Solutions for GHG Monitoring

    Most sources of fugitive emissions are from multiple points rather than single point sources. So, open path area or perimeter monitoring provides more meaningful fugitive emissions data than an array of point sensors or a program of grab sampling. Point measurements may underestimate emissions because of missing locations with high gas concentrations, or conversely overestimate because they are located in areas of high concentrations. Grab sampling programs typically check only a small percentage of potential...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Premium

    Ambient Continuous Metals Monitoring/ Fence Line Monitoring/ Source Identification

    The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Low concentrations monitoring of benzene and aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    With over 15 years of experience in the measurement of volatile organic compounds (VOC), Environment SA announces the VOC72M, a new generation analyzer for the measurement of BTEX compounds by gas chromatography with photo-ionization detector (PID). The VOC72M can handle up to 40 compounds and eight configurations for analysis. This compact and fully automated analyzer with wide voltage range specifications (90-240V) provides equivalent performance to the laboratory chromatographs and is particularly suited to...

    By ENVEA based in Poissy, FRANCE.

  • Airport Environmental Monitoring

    Water pollution from airport run-off is increasingly coming under public and government scrutiny. As environmental regulations tighten, the ability to monitor for aviation fuel contamination from runway run-off has become essential. Monitoring sites at airports can be extremely challenging often with no power or telephone lines available and with limited access for maintenance. Chelsea’s robust UviLux Hydrocarbon Sensor with its low power consumption and high accuracy is ideally suited for this application....

    By Chelsea Technologies Group based in West Molesey, UNITED KINGDOM.

  • HCl Monitoring in Air

    Hydrogen chloride (HCl) is a colorless, sometimes slightly yellow, gas. It is an undesired environmental component that may be damaging to workers and the surroundings. Exposure limits have thus been established by industries to make sure that the workers operate in a safe environment. HCl monitoring is especially required for incinerators, coal-fired power plants, aluminum recycling and cement plants. Unisearch offers a reliable and easy-to-use HCl analyzer – the TDLAS-based LasIR system. Studies have...

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Air sampling & monitoring systems for environment industry

    Researchers and Engineers utilize HI-Q air sampling equipment and systems for analyzing and investigating environments around the world. Data collected by HI-Q air sampling systems have provided critical information in the identification and prevention of pollution. HI-Q offers a line of high volume (TSP-Type) air sampling systems for data collection in perimeter monitoring & industrial emissions monitoring applications.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • Odour Monitoring

    Measurement of odours from pulp & paper, feedlots and natural sources is challenging and requires careful selection of instrumentation. Ecotech offers a complete monitoring solution designed for this application. Odours are one of the most common sources of air pollution complaints and may be due to a wide variety of sources from rotting vegetation, animal feedlots, pulp and paper manufacturing, sewerage treatment facilities etc. The measurement of odours is extremely difficult due to the variety of sources...

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Cost effective, real-time pollution monitoring networks

    Ambient air pollution is a continuous problematic since many years, and the various organizations in charge of air quality monitoring work constantly on how to improve their structures and gain the most accurate and reliable data possible. Indeed, the changes in mentality and therefore in urbanism development for example, implies an access to the data faster and at multi-location level. Air quality monitoring reference stations used nowadays measure with an extreme accuracy in located areas, but requires a lot of...

    By ENVEA Cairpol (ex Environnement S.A) based in POISSY Cedex, FRANCE.

  • Premium

    Fence-Line Monitoring of Fugitive Emissions

    The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB based in Furulund, SWEDEN.

  • Prescribed Burning

    A general understanding of the separate and combined effects of several weather elements on fire behavior is needed to plan and execute a good prescribed burn. Because weather and fuel factors interact, an experienced prescribed burner can conduct a successful burn even with one or more factors slightly outside the desired range—as long as they are offset by other factors. Accurate fire weather monitoring of fire danger indices via the RAWS network, providing historical data leading up to a prescribed burn is...

    By FTS based in Victoria, BRITISH COLUMBIA (CANADA).

  • Environmental Solutions for Airlines

    Governments the world over are now working on regulations that will require Airlines to monitor and manage their GHG emissions. The UK is leading this effort with requirements for 2010 - 2012, and other countries are soon to follow. Implementation of GHGWARE and the VisionMonitor Real-Time Environmental Performance Suite allows proactive GHG emissions and compliance data management in real-time as well as predictive modeling tools for planning of future regulatory compliance.

    By VisionMonitor Software, LLC based in Houston, TEXAS (USA).

  • Aviation Meteorology

    SWS and VPF sensors are used in airports throughout the world as part of aviation ground control and meteorological monitoring systems. Our visibility and ambient light sensors form the core of Runway Visual Range monitoring systems used to control the safe landing of aircraft in reduced visibility conditions. Our present weather sensors provide automated precipitation classification and monitoring that forms a vital part of the METAR signals broadcast to aircraft in the airport vicinity. The detection and...

    By Bristol Industrial & Research Associates Ltd (BIRAL) based in Portishead, UNITED KINGDOM.

  • Environmental monitoring solutions for the industrial sites industry

    Industrial facilities, Superfund sites and other remediation sites. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection systems. Customer service and support includes the...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA).

  • Environmental data managament & compliance reporting for the manufacturing industry

    Environmental data allows organizations to manage and monitor their compliance with greenhouse gas regulations, the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, and many others. Additionally, many companies must generate and report environmental data to uphold permits which allow them to conduct their business.

    By enVirSys LLC. based in Littleton, COLORADO (USA).

  • Environmental monitoring solutions for the oil refineries & petrochemical industry

    Air-powered submersible pumps, equipment for free product recovery and groundwater remediation, groundwater sampling. QED Environmental Systems has been a leading manufacturer of air-powered environmental pumps, control equipment and supplies for groundwater remediation, groundwater sampling, landfill leachate and methane condensate pumping since 1982. QED also manufactures high-performance, cost-effective air strippers for groundwater and process water, plus solar-powered, wireless remote data collection...

    By QED Environmental Systems, Inc based in Dexter, MICHIGAN (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you