Only show results available in Virginia? Ok

air monitoring service Applications

  • Air monitoring equipments for laboratory analysis

    Our purpose built environmental laboratory provides accurate and efficient analysis, specialising in the determination of gaseous pollutant concentrations. Other processes can also be performed to meet the specific needs of our customers.

    By Gradko International Ltd based in Winchester, UNITED KINGDOM.

  • Dust monitoring and Sand Storm Monitoring

    The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Premium

    Gas Detection

    Gas Detection is our core business, whether portable, colormetric, fixed systems or Hazmat. We do more than get you the equipment you need--we also help you select it, calibrate it, service it and maintain it. Our technicians, our sales reps and top management can speak with authority on the capabilities of our equipment and match it to your specific application. And we are the champions of the one-of-a-kind solution, because we have the know-how and the right tools.

    By Argus-Hazco based in Chesterfield, MICHIGAN (USA).

  • Premium

    Air sampling & monitoring systems for fire & police service

    Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real.  Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA).

  • CBI World Brings CBI Group

    Hammam Industries & Co. Egypt & Middle East is Exclusive Rights of Licencee Manufacturer & Supplier of Original Equipment's & Spare Parts for CBI Group Equipment Supply & Maintenance or After Sales Service in Egypt. Visit "Masters of The Winds" Web Site for more information on CBI Group or Contact Hammam Industries & Co.

    By Hammam Industries & Co. based in 6th Of October City, EGYPT.

  • Data Acquisition and Control

    Many companies worry over the quality of emissions data reported to the EPA. CEMS Experts is a skilled and experienced company with over 20 years of proven and dependable service to provide you with a reliable solution to your Analyzer Management and Data Acquisition Software needs. We supply customized DAS solutions for all federal (EPA), state and local CEMS regulations, plus off-the-shelf products for process monitoring, ambient air testing, or any other application requiring fast, reliable data capture and reporting.

    By CEMS Experts - a division of GK Associates, Inc. based in Simi Valley, CALIFORNIA (USA).

  • Premium

    Equipment

    Omnitec Design manufactures negative air machines, scrubbers, moisture extractors, heaters, pressure monitors, and water filtration equipment used by abatement and restoration contractors, health care facilities, in industrial and commercial applications and a wide range of environmental cleanup projects. Our equipment combines the best technologies available for HEPA air filtration, control of VOCs, odor and biological contaminants and heaters for structural drying and sanitizing. Our mission is to provide high quality and reliable filtration equipment. Our equipment is used for Abatement, Remediation, Construction and renovations, labs and healthcare facilities, and more. When you purchase our equipment you will receive not only a quality product, built in the USA, but also our customer service which is the best in the industry. By purchasing our filtration, dust collecting, and purifying equipment, to will receive from Omnitec our complete support. Breathe easy.

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Mass Spectrometer for air consultancy

    Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Air emissions testing for air regulations and compliance consulting

    There are many businesses that release emissions into the air due to their daily processes. Because there are regulations in place to minimize pollution, these businesses need the help of air testing companies to make sure they are in compliance with the regulations. We perform air emissions testing to let your business know whether it falls within the set guidelines, as well as emissions monitoring services to ensure you remain within the regulations. This will keep the environment around your plant healthy and ensure you don’t accrue fines for violations.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Premium

    Gas monitoring instruments and systems for phosgene monitoring

    Phosgene COCl2 is a colorless gas. While it has been used as a Chemical Weapon Agent (CWA) in the past, currently this poisonous gas is also an important reagent in synthesis in the pharmaceutical and chemical industries. The plants using phosgene are typically equipped with gas sensors to detect leaks in the indoor ambient air. The critical situations arise when equipment in contact with the gas at the manufacturing facilities are serviced and maintained. As phosgene is very poisonous, even small gas pockets in serviced equipment may be dangerous to maintenance personnel. Gasmet™ FTIR Gas Analyzers are ideal tools to monitor point sources of phosgene. The measurement technology has high specificity, may be operated continuously, and has a fast response time.

    By Gasmet Technologies Oy based in Helsinki, FINLAND.

  • Air and particule sampling for the oil and gas industries

    Ormantine offers a wide range of products and services to meet the array of different needs that arise in the oil and gas industries. Volatile Organic Compounds (VOCs), benzene, and other compounds are released during drilling, hydraulic fracturing (fracking) and other extraction procedures. Monitor NOx emissions from heavy duty equipment, particulate matter, and ground level ozone, the formation of which is contributed to by VOCs from processing, transportation, and storage of oil and gas.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

  • Independent particle characterization services for environmental industries

    Particle size, particle concentration and other physical characterization analyses are critical to many environmental applications. Regulatory agencies in the environmental sphere demand strict compliance to standards and discharge regulations. Physical testing of samples for parameters such as particle size and concentration can give insight to the process control engineer on how effective and compliant a discharge handling system is operating. Particulate loading from both air emissions and waste water discharge are monitored in many industry sectors and PTL testing provides valuable supporting data in this monitoring process.

    By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

  • Premium

    Abatement and Remediation

    Containment and safety issues are a critical consideration when working on any mold, asbestos, or lead remediation/abatement projects. Improperly contained, the dust and bio-contaminants released can, be very harmful for both on-site workers and occupants in neighboring areas. Exactly how you approach your containment and capture solutions will depend on the individual site’s risk assessment report. If you need help identifying solutions to the issues raised in the report, feel free to contact our customer service department and we can review your options together. In most cases, however, there are four common considerations that will be relevant: -Meeting Containment and Air Change Requirements -Monitoring of Containment Pressure -Sterilization of Filtered Air -Removal of Odors, Mold Spores, VOC’s and other Airborne Bio-Contaminates

    By Omnitec Design, Inc. based in Mukilteo, WASHINGTON (USA).

  • Liquid Chromatography for soil consultancy

    Everyone has a responsibility to care for the environment to reduce the levels of pollution, including businesses that daily release emissions into the air and the ground. This is why we provide a full-service environmental testing service to help businesses identify problems and resolve them so they operate in the most environmentally-friendly method possible. We offer air emission testing, emissions monitoring services and stack emissions testing to businesses of all sizes.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

  • Gravimetric analysis for soil consultancy

    There are many businesses that release emissions into the air due to their daily processes. Because there are regulations in place to minimize pollution, these businesses need the help of air testing companies to make sure they are in compliance with the regulations. We perform air emissions testing to let your business know whether it falls within the set guidelines, as well as emissions monitoring services to ensure you remain within the regulations. This will keep the environment around your plant healthy and ensure you don’t accrue fines for violations.

    By Custom Stack Analysis, LLC. based in Alliance, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you