air monitoring system Applications

63 Results found
Only show results available in Virginia?
OK
  • Keyword: air monitoring system ×

Continuous emissions monitoring for mercury monitoring

by Opsis AB     based in Furulund, SWEDEN

Waste incinerators, cement plants and power plants need good and reliable measurements of total gaseous mercury. The measurement of total gaseous mercury is a challenge due to chemical reactions and contamination. The installed systems will often require a lot of maintanence still not giving reliable results.

Air sampling & monitoring systems for government sector

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q serves the needs of various government agencies with a wide range of application-specific, customized air sampling products. HI-Q works directly with governmental agencies such as the Environmental Protection Agency (EPA), Department of Energy (DOE), Department of Defense (DOD) & Department of Homeland Security (DHS) to develop situation specific, cutting edge air sampling products to help recognize potential threats. Since September 11, 2001, HI-Q continues to have an ongoing relationship with the EPA & DHS by continually working on government-funded projects for the development of airborne biohazard collection systems.

Dust monitoring and Sand Storm Monitoring

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

The frequency and intensity of dust and sand storms in many parts of the world are steadily increasing due to droughts and climate change. The severity of such storms is anticipated to increase over the coming years. These dust storms may last hours or days and cause huge damage and imposed a heavy toll on society with its physical effects, such as visibility reduction, heavy winds, red sky, hailstone and severe lightning. Such Dust storms, have a negative impact on human health, and industrial products and activities. They reduce visibility, layer on skin and cloths, infiltrate buildings and find their way into food and drinking water leaving a permanent sandy feeling in your mouth. Traditional dust monitoring instruments whether they be purely filter based gravimetric samplers or continuous monitors utilising Tapered Element Oscillating Microbalance (TEOM) or Beta Attenuation (BAM) simply are unable to cope with the high dust loads created by these storms. The filters on these instruments are quickly clogged and no further measurements are possible until a service technician visits to replace filters and filter tapes. In dust storm events this is impossible. Therefore, over the past few years a need for alternate technology which are non filter based, can cope with extremely high dust loads, require minimal maintenance and can operate off solar power has been employed in regions such as the Gobi Desert of China for the continuous monitoring of dust storm events. These instruments have demonstrated that an instrument can measure dust storm events with maintenance performed only once every 12 months. That it is possible to communicate remotely and that these systems can not only provide an early warning for dust events but have the accuracy and sensitivity to be an extremely useful tool in gauging hourly changes of visibility. Infact such instruments have been utilised by a number of EPAs around the world, including all Australian EPAs for the purpose of measuring ambient visibility as well as providing an accurate indication of rising dust events.

Gas Detection

by Argus-Hazco     based in Chesterfield, MICHIGAN (USA)

Gas Detection is our core business, whether portable, colormetric, fixed systems or Hazmat. We do more than get you the equipment you need--we also help you select it, calibrate it, service it and maintain it. Our technicians, our sales reps and top management can speak with authority on the capabilities of our equipment and match it to your specific application. And we are the champions of the one-of-a-kind solution, because we have the know-how and the right tools.

Moisture Monitoring for Instrument Air & Compressor Systems

by Moisture Control & Measurement Ltd     based in Wetherby, UNITED KINGDOM

The presence of humidity in a blanketing gas for sensitive instruments can cause corrosion problems, rapid changes incalibration and loss of sensitivity. The presence of oil contamination in compressors can cause similar problems.

Air Quality Monitoring Stations

by Opsis AB     based in Furulund, SWEDEN

Opsis provides complete AQM stations, used for street-level, urban trend and background applications. The monitoring systems have been approved by the German TÜV and the U.S. EPA among others.

Air quality monitoring for regulatory purposes

by Ecotech Pty Ltd     based in Knoxfield, AUSTRALIA

Air quality monitoring for regulatory purposes requires instrumentation, systems and procedures that meet international standards such as those described by the USEPA, MCERTS or the European Union. Ecotech offers solutions that meet this criteria.

Air Quality Monitoring Equipment for Industry

by Signal Group Ltd     based in Camberley, UNITED KINGDOM

Signal manufacture a wide range of Air Quality Monitoring equipment, from reference method integrated systems down to battery powered indicative units.

PTR-MS systems for indoor air quality monitoring

by Ionicon Analytik Ges.m.b.H.     based in Innsbruck, AUSTRIA

Room-air VOC detection and monitoring. Measurement of most common VOCs causing smells or health effects. Real-time monitoring of emissions related to the Sick Building Syndrome. Ozone induced reactions in aircraft cabins.

Gas monitoring instruments and systems for compressed breathing air

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line breathing (hard-helmet diving), respiratory equipment used on ground for escaping from toxic atmospheres and for working in contaminated atmospheres. It also covers breathing gas for hyperbaric operations and synthetic air. While EN 12021 does not cover aerospace applications, the British MOD publication DEF STAN 68-284 and its counterparts in other countries cover also the breathing gases used in aviation.

Gas monitoring instruments and systems for engine emissions measurements

by Gasmet Technologies Oy     based in Helsinki, FINLAND

The exhaust gas from combustion engines is a complex mixture of gases and particulate matter. The composition of the gas may change rapidly. Multicomponent analysis of exhaust gases can be performed with a Gasmet™ FTIR Gas Analyzer with a response time (T90) of one second. The winning combination is the result using of a small volume gas sample cell, a powerful sample pump and a fast detector with liquid nitrogen cooling. The analyzer, sampling system and computer can be assembled on a cart for use in a dynamometer laboratory, or the portable version can be used for roadside tests.

Gas monitoring instruments and systems for DeNOx process control

by Gasmet Technologies Oy     based in Helsinki, FINLAND

In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power plants.

Gas monitoring instruments and systems for stack testing

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives and regulations set. Two major parts of this on-going quality assurance cycle are the QAL2 and AST procedures. A test laboratory performs tests on the systems on-site, and determines whether the systems fulfill the set requirements or not.

Air sampling & monitoring systems for fire & police service

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Fire service and law enforcement workers frequently face unknown chemical and biological hazards. Internal emergency response personnel must assess the situation before committing a rescue or control team. Today, the Threat of biological agents is real.  Accurate situation assessment is of paramount importance when responding to an emergency or control situation. HI-Q’s emergency response air sampling kits have offered Fire and Police emergency response teams a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

Air sampling & monitoring systems for commercial nuclear industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Since 1973, HI-Q has directly and successfully served the commercial nuclear industry worldwide with reliable, High Quality (HI-Q), continuous duty air sampling equipment, systems and accessories. For over 30 years, our products, professional design capability, and consumables have been used in remote & internal air monitoring programs including stack sampling system designs which implement the “shrouded probe” per ANSI N13.1 1999 design specifications.

Air sampling & monitoring systems for energy/utilities industry

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

Finding efficient ways to generate, deliver and consume energy resources while reducing pollution is an ongoing quest for the Energy & Utility Industries. HI-Q has developed instrumentation geared toward monitoring emissions and the dispersal of pollutants from power plants and industrial facilities. HI-Q base-line & stack sampling equipment has been used in studies to identify and track the spread of pollutants around the globe.

Gas monitoring instruments and systems for process NOx measurement

by Gasmet Technologies Oy     based in Helsinki, FINLAND

Nitric acid HNO3 is an important intermediate reagent for production of several important end products, such as fertilizers, explosives, dyestuffs/pigments, pesticides, pharmaceuticals, photographic materials, plastics, and synthetic fibers. At nitric acid manufacturing plants, the Gasmet™ FTIR Gas Analyzer can be used to measure several gaseous components from the process stream for purposes of process control. A single system can be used to measure the high levels of nitrogen monoxide NO and nitrogen dioxide NO2, as well as water vapor H2O, nitrous oxide N2O, carbon monoxide CO, carbon dioxide CO2 and ammonia NH3. The fixed installation products for these purposes are the Gasmet™ CEM II measurement system, and the Gasmet™ FCX Gas Analyzers, both of which utilize the FTIR measurement technique for simultaneous multicomponent analysis of the sample gas.

Measurement solution for ambient air workplace monitoring

by Protea Limited     based in Middlewich, UNITED KINGDOM

Protea can supply fixed workplace monitoring systems that can measure single or multi-points about the workplace. Specifically designed analytical systems can ensure detection limits down to ppb levels can be achieved for multiple gases with a single instrument. Controlling software can run automatically, providing instantaneous or time-weighted average readings.

Air sampling & monitoring systems for defense/military sector

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

From portable hand held battery operated to rugged field deployable, military organizations worldwide rely of HI-Q air sampling systems & accessories during research, development, test and evaluation (RDT&E) and for reliable protection of personnel from Nuclear Biological Chemical Threats. HI-Q’s emergency response air sampling kits have offered the Defense & Military Industries a way of recognizing, determining and identifying the presence of harmful Biological & Nuclear Threats.

Measurement of methyl bromide in ambient air for monitoring workplace exposure limits in fumigation facilities

by MOCON - Baseline     based in Lyons, COLORADO (USA)

The Series 8900 Methyl Bromide Monitoring System provides an automated, direct measurement of Methyl Bromide in ambient air. This instrument can meet and exceed the requirements for ambient methyl bromide monitoring. It is utilized in fumigation facilities and industrial plants to detect potential worker exposure to methyl bromide, resulting from mechanical failure, human error or product off gassing. Multipoint sampling options allow the analyzer to monitor multiple sample locations for greater coverage.

Need help finding the right suppliers?

Let the XPRTs do the work for you