air pollution control Applications

Whether you are flow coating miniblinds, magnetic tape, aluminum cans, coils, wire or paper, Anguil`s 35 years of pollution control experience has provided unique insight into the wide variety of applications in the coating industry. Anguil`s experience leads directly to savings for our customers. Determining your solution begins by quantifying the problem with a thorough assessment of your emissions. Utilizing proven principles of design engineering, your system will evolve to incorporate air volume reduction...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Environmental regulations for air pollution cotrol at metal decorating and packaging facilities usually address can makers, base coil coaters, or metal parts and packaging manufacturers. Metal Decorating can be classified as any process where metal is formed painted, or coated. Metal Packaging is generally considered processes involved in the production of aluminum cans, light metal containers, closures and components.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from dryers and oven tunnel exhausts, and the capture of fugitive emissions. Over 300 successful printing installations...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

The textile industry typically produces an oil mist haze that creates a visible plume from the stack. The haze comes from the oils, surfactants and chemicals used in the manufacturing process as well as from machinery oil. Many facilities employ a scrubber or an oxidizer to remove the haze.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Ventilation Air Methane (VAM) is a Greenhouse Gas (GHG) released by coal or mineral mining operations, it is also commonly known as Coal Mine Methane (CMM). The air pollutants from this process have a global warming potential 21 times greater than carbon dioxide, which is another well known GHG. As alternative energy technologies have developed, methane is increasingly used to generate electricity and heat. Landfills and mines represent two of the most abundant sources, however reports indicate that more than...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Where molded plastic parts or vinyl fabrics are produced, scrubbers are used to capture the sub-micron fumes produced in the heating process. Also, scrubbers are commonly used to treat metal treating off-gases for removal of acid gases and/or fine mists.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Anguil`s Food and Bakery industry experience provides reliable solutions for your emission control challenges. We have worked on a wide range of applications: achieving a high destruction level of ethanol from bakery ovens, chaff and particulate from coffee roasting, efficiently destroying grease from frying and rendering operations, handling smoke house emissions, and maintaining required opacity and odor levels from confectionery and gum manufacturing.

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Renewable energy plants are expanding and being developed at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

From pill coating and mixing operations to Ethylene Oxide (ETO) sterilization, Anguil has had great success solving a wide range of emission control applications in the pharmaceutical industry. As companies struggle to comply with the EPA`s MACT (Maximum Achievable Control Technology) standards or international regulations, it is comforting to know that Anguil thoroughly understands your process. Over three decades of experience treating halogenated, VOC and HAP process streams enable us to efficiently solve your...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Silicate fumes and acid gases can occur in the production of various glasses. Acid gas scrubbers are extremely effective in controlling these emissions.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

For processes where plastics are molded or extruded (as evidenced by a “hazy” exhaust plume at the stack) scrubbers are used to treat the sub-micron particulates and oil mists generated. Certain other processes (e.g. Fiberglass Reinforced Plastic equipment fabrication) emit VOCs that can be captured with absorption.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Anguil is intimately familiar with the emission capture, control and compliance hurdles that both composite and carbon fiber producers face. So much so that we have developed specific technologies that address the unique needs of our customers in both industries. Please visit our Carbon Fiber Page to explore Anguil`s proprietary oxidizer designs for furnace and oven emissions. On composite applications, firms continue to battle emission levels by lowering styrene content in the resins they utilize. However,...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

Emissions produced in the steel industries are wide ranging. These can include coke oven gas clean-up, acid gas removal and furnace emission control.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Grain handling and/or processing operations have the potential to release particulate that can be effectively removed with venturi scrubbers. Fermentation of corn to generate ethanol also releases fugitive emissions that can be scrubbed with counter current packed towers.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

Spray booths in automotive, golf ball, and parts applications generally require particle control from over-spray as well as VOC control. Wet scrubbers are effective in controlling the droplets and protecting the down-stream thermal oxidizers from fouling with the non-combustible inorganic pigments.

By CR Clean Air Group, LLC based in Parsippany, NEW JERSEY (USA).

ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.