Only show results available in Virginia? Ok

air pollution control manufacturer Applications

  • Premium

    Air pollution control for the rubber curing industry

    One-time, on-site final destruction of particulates. This is the key benefit gained from an Anguil solution to the emissions generated by the rubber curing process. Other advantages of an Anguil solution include the elimination of visible blue haze, guaranteed destruction efficiency compliance, and the elimination of costly mechanical filtration media and the lingering liability issue associated with filter disposal.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Industrial air pollution control for the automotive and vehicle engineering

    Increased mobility and the soaring worldwide demand for cars have opened up questions regarding sustainability and environmental protection. Hazardous exhaust gases are emitted not only when driving vehicles, but also during their production. The waste gas volumes in the automotive industry reach up to 200,000 Nm³/h.

  • Premium

    Industrial air pollution control for the consumer goods industry

    The diversified consumer goods industry, with its broad range of products, is a significant area for air pollution control applications. Today, the ecological image of a company and its products is an important factor in the purchase decisions of customers.  An increasing number of suppliers, therefore, aim to maintain their growth with ecologically sustainable production.

  • Premium

    Odor Control

    We treat air streams to remove odors allowing industrial processes to be operated in compliance with local regulations and without causing a nuisance to neighbors due to odors and smells. Our technologies have been applied to a range of processes including: Waste treatment (municipal and industrial) Manufacture of flavors Food processing Waste water treatment (Municipal and industrial) Chemical manufacture Rendering

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Air pollution control for the textiles industry

    Companies that use solvent based inks, dies, or coatings in the textile manufacturing process – commonly incorporate from filtration systems in the control plan.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Air pollution control for the metal industry

    Surface printing and coating operations in the metal can manufacturing industries – commonly use thermal oxidizers for air pollution control needs with heat exchangers for energy conservation.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Cement

    MEGTEC's extensive scrubber experience applies to the cement manufacturing process for the effective control of SO2 and HCl by the injection of lime slurry. Our customers can achieve up to 90% reduction of SO2 and 98% reduction of HCl using microfine or standard lime. The TurboSorb Spray Dryer Absorber (SDA) can often retrofit into an existing gas conditioning tower, or downcomer duct, to avoid the high cost of new capital equipment.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Iron and Steel

    SoniCool™ Evaporative Gas Cooling & Conditioning uses a finely atomized water spray to cool EAF, BOF off-gases from over 2,400°F (1,315°C) to as low as 240°F (115°C), protecting ductwork and downstream air pollution control equipment from high temperature and sparks, while providing rapid cooling for dioxin and furan control. By optimizing humidity levels, SoniCool™ helps electrostatic precipitators. The water spray completely evaporates while cooling gases. There is no free water and no troublesome deposits in ducts, towers or hoppers. Turbotak rugged nozzles are made to the exact requirement, and ideally suited to the harsh conditions in the steel manufacturing process while still producing ultra-fine sprays, with precise control of dropsize and spray coverage.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control for the electronics and semiconductor industry

    Anguil customers in the Semiconductor and Electronics industries include chip manufacturers, printed circuit board makers, LCD (Liquid Crystal Display) manufacturers and probimer operations. Each of these processes have unique emission control challenges that all require a custom engineered system designed around the given process parameters. With Anguil`s product breadth our customers are ensured that the proper technology will be chosen.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the paint and paint spray industry

    In addition to tightened government regulations, paint manufacturers and paint booth owners face several unique challenges when controlling their emissions. These challenges include airflow reduction, fugitive emissions, particulate control and reducing operating costs.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the composite & carbon fiber industry

    Anguil is intimately familiar with emission capture, control and compliance hurdles that composite and carbon fiber producers face. We specifically address the needs of our carbon fiber customers with proprietary oxidizer designs for furnace and oven emissions. Our systems are recognized for energy efficient operation and destruction capabilities by the U.S. Federal Government at their Oak Ridge National Laboratories (ORNL). Anguil continues to help producers drive down energy consumption and emission output through our participation in The Beacon, an initiative at the forefront of green manufacturing practices for fiber production.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the automotive industry

    Anguil`s engineering expertise has led to numerous successful air pollution control and emission control installations in the automotive manufacturing industry. From painting vehicles to engine test stations and tire manufacturing, we have supplied oxidizers and heat recovery systems to both tier 1 and tier 2 automotive plants.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Air pollution control for the semiconductor & electronics industry

    Removing all VOCs/HAPS from Semiconductor/Electronics manufacturing – commonly use regenerative thermal oxidizers (RTO) for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Industrial air pollution control for the food industry

    Quality of life and well-being are, more than ever, important issues for consumers. The `wellness` concept has changed the food industry: Today, all food manufacturers are committed to increasing the nutritional value of their products, while constantly improving the taste. Their innovations require continuously inventive solutions in air pollution control.

  • Air pollution control for the baking and food industry

    Companies that produce leavened bread products or flavors and fragrance manufacturers – commonly use catalytic oxidizers for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Air pollution control for the automotive industry

    Including any of the worldwide automobile manufacturing paint or coating operations or their tier suppliers – commonly use concentrators and regenerative thermal oxidizers (RTO) for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Air pollution control for the liquid waste treatment industry

    Companies requiring treatment of any waste-water emitted by a manufacturing process – commonly use incinerators for air pollution control needs.

    By Catalytic Products International (CPI) based in Lake Zurich, ILLINOIS (USA).

  • Premium

    Automotive and Industrial Painting

    Reliability. Uptime. Uninterrupted Production - all are essential requirements in painting and finishing applications. Just-in-time manufacturing demands uninterrupted production and smooth pressure control that eliminates pressure fluctuations in the painting and finishing process. MEGTEC has supplied many systems to Tier 1 and Tier 2 automotive plants where high volume, low concentration exhaust streams are treated economically and effectively, yet adaptable to changing finishing formulations.

    By Babcock & Wilcox MEGTEC based in De Pere, WISCONSIN (USA).

  • Premium

    Air pollution control (APC) equipments for fire laboratories

    Fire laboratories perform different types of tests and experiments to analyze the characteristics of products and materials , when exposed to fire. Using these data , manufacturers can improve their products, fire resistance, and their longevity. Although the fire is controlled in a laboratory, many toxic substances are formed and these must be removed before the air is released into the environment. EnviBATs technology is extremely effective for this type of application. It eliminates the particles of all sizes, which also has the advantage that it eliminates the burning smell.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Applications and Air Pollutants Removed in the Chemical, Pharmaceutical and Plastics Industries

    Supplying for over 35 years reliable air pollution control equipment and systems for removal of all gaseous compounds, particulate and odors from chemical process operations, reactors, dryers, calciners, membrane cells, pharmaceutical reactors and tablet dryers, crystallizers, vessel filling and storage vent emissions, emergency scrubbing of high concentration gas releases from cylinders, vacuum pump emissions, Quench /scrubber systems for acid gases and particulate from high temperature thermal oxidizers.  Gaseous emissions from piloting operations and research lab hoods. Specialty NOx abatement for explosives manufacturing and other process operations. Recovery and re-concentration of acids and other gaseous contaminants including by-product production.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you