Only show results available in Virginia? Ok

air pollution control plant Applications

  • Air pollution control (APC) equipments for power plants

    We live in a power dependent world. Almost every human activity requires energy and many of them require large amounts of energy. For example, the production of metal from ore is one of the most energy-consuming productions available due to the high melting point of metal. Depending on the type of energy powering the production, a release of emissions of polluting particles will be inevitable without our technology. In addition come emissions from production as the power is used for.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Premium

    Air pollution control for microelectronics

    ERG`s purpose-designed scrubbing systems are engineered to suit each application and client`s requirements. During the microelectronics boom years in the 1990s, ERG installed a variety of plants treating acid off-gases (HF, F2, HCl, Cl2, etc) with the capability to handle the sticky silanes formed from chlorosilane hydrolysis.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM.

  • Air pollution control solution for the NOx and CO2

    Specific industrial applications require wet end of pipe treatment for NOx or CO2. Macrotek offers absorbers utilizing various reagents for neutralization of NOx or CO2. NOx scrubbing is particularly suitable in situations where Nitric Acid can be utilized elsewhere in the plant, as it is a scrubbing product. As CO2 regulations become more stringent, methods for reducing emissions are continually being evaluated. Macrotek offers CO2 scrubbing technology which isolates CO2 in a contaminated stream to produce a...

    By Macrotek Inc. based in Markham, ONTARIO (CANADA).

  • Premium

    Air pollution control for the printing, laminating & converting industry

    Achieving cost effective local regulatory compliance in the printing and converting industry requires a complete understanding of both regulatory standards and the printing process. Through experience, Anguil has developed unparalleled expertise in meeting your unique requirements. We understand the effects of water versus solvent-based inks on the line, elimination of odors and toxic fumes from...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Air pollution control for the ethanol/biodesel industry

    Renewable energy plants are expanding and developing at a significant rate in North America and throughout the world. In the United States, the Clean Air Act for reformulated gasoline (RFG) mandates a 2wt.% oxygen requirement, driving the demand for more production. Ethanol is the most viable additive because it is a clean-burning fuel produced from renewable, domestic biomass sources. However, the production of these fuels can result in unacceptable levels of volatile organic compounds (VOCs), carbon monoxide...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    Waste to Energy

    We can treat the air streams from waste management plants, MBT (Mechanical Biological Treatment) reception and composting areas, Waste Water Treatment Plants (WWTP), Refuse Derived Fuel (RDF) Plants, gasification of waste, syngas, torrefaction, gas engines and biogas upgrading. In waste management plants and WWTP, we remove the odors that may be causing a nuisance to neighbors, with bioreactors using Biomass to degrade odorous components and where odors are particularly intractable or VOC emissions higher,...

    By Dürr Megtec LLC based in De Pere, WISCONSIN (USA).

  • Dust collection and odor control in waste management sites

    Th turn key plant is composed by three different wet stages. The first stage is a venturi jet scrubber to collect dust and particles, then the second and third stages are deputed to absorb bad smells, such as H2S, Ammonia and Ammines. The absorption takes place thanks to the injection of chemicals (such as Sulphuric Acid, Sodium Hypochlorite and Sodium hydroxide.

    By F.G.M. engineering srl based in S.Croce S/Arno (PI), ITALY.

  • Air dedusting for clinker cooler

    e control of clinker fines emissions after the heat exchanger, placed downstream of the clinker cooler is usually a problem for plant managers. The process is characterized by high material abrasiveness, high loads and variable flow rate in normal and maximum conditions. The usual dedusting arrangement is achieved through a bag house which is typically associated with high maintenance costs and downtime in production due to frequent filter element replacement...

    By Advanced Cyclone Systems, S. A. based in Porto, PORTUGAL.

  • Air pollution control (APC) equipments for chemical industry

    Sulfur plants, acid plats etc. Chemical industry is important to our modern society, but they also produce large quantities of chemical byproducts. These byproducts can be dangerous, and if they cannot be used for other processes, they are often incinerated, causing large amounts of hazardous substances which end up in the flue gases.

    By Envibat AB based in Skellefteå, SWEDEN.

  • Bio-Contaminant Control

    Microbes and bio-contaminants are pollutants such as bacteria, germs, and virus. All are small in size and usually microscopic, yet they have an amazing ability to do damage to all living organisms including plants and humans. When dealing with medical-grade and food products it is important to maintain the highest levels of sanitation possible. Many everyday illnesses are caused by viruses like the common cold or the flu. AgriAir purifiers will destroy 99.99% of airborne and surface bio-contamination helping to...

    By AgriAir Equipment - a Brand by Omnitec Design Inc based in Mukilteo, WASHINGTON (USA).

  • Premium

    Continuous emissions monitoring for CO2 capture

    The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few mg/m3.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Waste water treatment plants Air quality control by TRS MEDOR

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. At the entrance of the waste water plants, where the waste water arrives, strongly...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Applications and Air Pollutants Removed in the Fertilizer Industry

    Wet Scrubbers, dry collectors, wet electrostatic precipitators and complete engineered systems for urea, MAP, DAP, TSP and AN Plant rotary dryers and coolers, reactors and ammoniation granulators, pug mills, rock acidulation, curing, storage and material handling operations to control emissions of: particulate, including phosphate rock dust, ammonium phosphate, ammonia, nitric acid, NOx, phosphoric acid, hydrogen fluoride, silicon tetrafluoride, sulfuric acid, removal. Complete systems for scrubbing and...

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • Applications and Air Pollutants Removed for Mineral Products Industry

    Removal of acid gases and particulate from cement, brick and other product kilns. Mineral product dryers including coal. Hot mix asphalt plant particulate control. Sulfur dioxide and hydrochloric acid gas removal.

    By Bionomic Industries Inc. based in Mahwah, NEW JERSEY (USA).

  • SO2 Monitoring in Air

    SO2 (sulfur dioxide) is measured in a number of applications. SO2 is used as a food grade preservative and must be regulated in accordance with government-set criteria to be safe for consumers. It is also measured in fuel exhaust to control for environmental pollution and in cement plants for process control.

    By Unisearch Associates Inc. based in Concord, ONTARIO (CANADA).

  • Premium

    Waste water treatment plants Personnel Safety & H2S filter management

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® offers high meteorological solutions. As a result of the confinement of the waste water stations, toxic components such as H2S...

    By Chromatotec Group based in Val de Virvée, FRANCE.

  • Recycling Solutions for the energy and environment industry

    A comprehensive range of power generation technologies with environmental benefits. ANDRITZ technologies and processes for power generation utilize renewable fuels as well as traditional fossil fuels in efficient and environmentally appealing ways. In addition, there are purely environmental technologies in this category to meet the most stringent standards for emissions and effluent quality. From steam generators and hydropower plants, to air pollution control systems and wastewater treatment equipment,...

    By ANDRITZ MeWa - ANDRITZ Group based in Gechingen, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you